www.usmotoman.com

Inner Clutch Hub — $79.25

Mini Gauge Pump 0-300 PSI — $43.73

Extension Cord For Battery Tender — $11.48
Use the 25 foot long lead extension with the Battery Tender Junior, Plus, 4, 5, or 10 Bank units. (Not for use with the 6 Volt Battery Tender Plus or any other Battery Tender product with white disconnect plugs.)

Nomad 66T 20mm Pulley for '07 Harley with 200mm tire — $505.75
Nomad 66T 20mm Pulley for '07 Harley with 200mm tire,

Scalpel 66T 20mm Pulley for '07 Harley with 200mm tire — $505.75
Scalpel 66T 20mm Pulley for '07 Harley with 200mm tire,

B-17 63mm Front End w/ Phantom Brake Lines, 0º Rake, 2" Under & Single Disc Brake — $1,785.00
B-17 63mm Front End w/ Phantom Brake Lines, 0º Rake, 2" Under & Single Disc Brake

B-17 63mm Front End w/ Phantom Brake Lines, 0º Rake, Stock Length & Single Disc Brake — $2,294.99
B-17 63mm Front End w/ Phantom Brake Lines, 0º Rake, Stock Length & Single Disc Brake

35º Tach/Speedo Base w/o Indicator Light Holes For ’88-Later Springer — $72.85
35º Tach/Speedo Base w/o Indicator Light Holes For ’88-Later Springer®

The Collector Exhaust w/ Baffle & Heat Shields For ’86-Later Softail­, Includes 02 Sensor Bung, LSD — $679.99
Start collecting the compliments for the baddest new pipes from Martin Bros.! Stepped 1.75" to 3". Transmission mount. Please state the make, model and engine the pipes are being ordered for. Fitment for pre-’07 or non-O2 sensor models requires purchase of MBBUNG bung plug sold separately.

HSR 42mm Easy Carburetor Kit For ’94-’03 XL1200 — $339.99
Contains 42mm Carb.with special air cleaner backplate. Requires the use of the stock oval cover and stock filter element.. Use stock throttle cables, manifold and choke cable. Note: Pre-'92 right side petcock will not clear carb. '04-later must use S.E filter kit.

So-Dals Exhaust w/ Baffle & Heat Shields For ’86-Later Softail® / Customs, Includes 02 Sensor Bung, LSD — $679.15
Home « Product Line « So-Dals For Evolution­ « So-Dals Exhaust w/ Baffle & Heat Shields For ’86-Later Softail® / Customs, Includes 02 Sensor Bung, LSD

B-17 63mm Front End w/ Standard Brake Lines, 3º Rake, Stock Length & Single Disc Brake — $1,529.99
B-17 63mm Front End w/ Standard Brake Lines, 3º Rake, Stock Length & Single Disc Brake

Bullet Air Cleaner 360 degree slots, wrinkle black cone, wrinkle black elbow — $411.35
Bullet Air Cleaner 360 degree slots, wrinkle black cone, wrinkle black elbow

Slickstas Exhaust w/ Baffle For ’86-’06 Softail­/Customs, LSD BLACK — $594.15
These pipes are available in left- or right-side drive for Evolution®, Twin Cam. Stepped From 1.75" To 2" To 2.25". Transmission mounted. Please state the make, model and engine the pipes are being ordered for.

Spear Air Cleaner chrome, 360 degree slots, black elbow — $411.35
Adorning more award-winning bikes than any other we’ve seen, this premium air cleaner increases air flow 10% over OEM air cleaners. Now available in 4 stylish colors with diamond cutting in the slots! Kit includes K&N® filter, 90º elbow, hardware and chrome billet cover with full or half slots. Requires separate breather bracket for mounting.

FourBidden™ Darksides™ Exhaust For 250mm RSD Carbureted Big Dog™ Models, Turn Ends — $702.54
Four 1 3/8" primary tubes merge into one 3" collector for awesome styling and aggressive sound (removable baffle included).

S&S® Dual Runner 2 into 1 Adapter Kit, Green Bullet Cones, includes K&N filters, Single Bore — $684.51
S&S® Dual Runner 2 into 1 Adapter Kit, Green Bullet Cones, includes K&N filters, Single Bore

Spear" Slayer Levers For V-Rod H-D­ 2002-05 — $222.66

Women's Jacket w/ Braided Trim, M — $165.74
Our best selling women’s black riding jacket has class cowhide leather exterior with narrow braided trim. It has zippered pockets and sleeves with a standing snap collar. Sizes W XS - XXL.

Dakota Digital 7000 Series Rectangle Hooded Style Speedo/Tach/Oil Pressure/Fuel Level/Voltage Indicators — $509.96
Introducing the latest in a long line of great gauges from Dakota Digital®! Continuing their drive to keep raising the bar in digital gauges, their new DDM7000 series stands alone! Choose from the attractive Spiked, Oval or Hooded Gauge housings to best compliment your ride. Load up on their unbelievable amount of digital info! Readouts include speedo, bar graph tach, oil pressure gauge and fuel level just to name a few. Call your MC Advantages sales rep for complete details on these brand new gauges...

Lancer Classic Forward Controls For ’00-Later FXST — $617.95
* Side port master cylinder to accommodate hidden brake line * Custom toe pegs and folding foot pegs with UV resistant rubber * Does not include brake line or shift linkage

Men's Milled Grain Leather Chaps, S — $84.99
Our traditional riding-style black chaps are available in cow or buffalo hide, as available. Chaps have flaps on side zippers, extra long cut, and jean style front pockets. Black in sizes XS - XXXXL.

5-Shot Rotor, 11.5" Front, For ’00-Later H-D® w/ 2.25" Hub — $174.21
5-Shot Rotor, 11.5" Front, For ’00-Later H-D® w/ 2.25" Hub

Dress Hardware Deco Kit For ’00-Later FLT — $186.15

Creations 3 70T 1.125" Pulley — $548.25
Please contact MC Advantages at 1.800.726.9620 to ensure correct ordering specifications. Forge-Tec Wheels are rotary forged through their proprietary in house process using only aircraft grade 6061 aluminum. This process makes use of the radial grain structure of the 6061 aluminum to produce a wheel of unmatched strength. All wheels, pulleys and rotors are then CNC lathed and milled using state of the art equipment to insure unmatched quality. They are then polished to a bright luster finish and...

Power Flow Air Cleaner straight slots, green cone, chrome elbow — $411.35
The Power Flow outperforms OEM air cleaners by 20%. It is now available in 4 stylish colors and/or with glitzy diamond cutting in the slots! Kit includes K&N® filter, 90º elbow, mounting hardware and chrome billet cover with tapered or straight slots. Bolt pattern fits CV 40mm carb but can be adapted to most popular carbs. We offer a complete line of adapters. Requires separate breather bracket for mounting.

Jockey Shift Knob, 13 Ball — $25.46

Exhaust Spacer Kit, 1/2" Offset, RSD — $25.49
For perfect fitment of Stainless Creations Pipes to your bike with LSD or RSD setup, call your MC Advantages sales rep for the appropriate spacer kit to order.

Baby Bullet Amber LED, Clear Lens, Black Powdercoat — $131.75
Auto Gem’s® Baby Bullet lights add cool accents and safety to your ride. These lights have housings of chrome or black powdercoat with an overall size of 1 1/8" diam. x 2 1/4", including a 1" mounting stud. Includes LED light source with amber or clear lens. NOTE: These lights are not DOT approved.

Brute IV Belt Drive With Clutch For ’90-’99 FXR w/ Kickstart — $654.50
Brute IV Belt Drive With Clutch For ’90-’99 FXR w/ Kickstart

FourBidden™ Darksides™ Exhaust For 300mm Carbureted Big Dog™ Models, Turn Ends — $702.54
Four 1 3/8" primary tubes merge into one 3" collector for awesome styling and aggressive sound (removable baffle included).

Cylinder Stud Kit For ’85-’99 Evolution — $135.15
Don’t risk head gasket failure! Feuling’s® Cylinder Stud/Head Kits are simply the strongest studs & bolts available! Recommended for all V-Twin engines and stock replacement, they are superior in strength and performance to any other cylinder stud head bolt kit on the market to meet and exceed the demands of high performance engines. Includes 8 cylinder studs, 8 head bolts and assembly lubricant.

Top End Gasket Kit For ’92-’99 Evolution — $82.65
EST (Extreme Sealing Technology) Kits contain MLS Head Gaskets, Steel Viton coated Base Gaskets, blue Viton Valve Stem Seals and AFM material. Other features include the Race Style Exhaust Gasket, that won’t fray into the port, and the one-piece Evolution® rocker box base gasket which is made from a single layer of .020” thick embossed Viton coated steel. Made for any builder who demands the best and appreciates the long-term value of a dollar!

95" EFI Power Package For Gear-Driven Cams — $2,250.76
Edelbrock’s EFI Power Package Kits are designed for ’01-Later Softail®, ’04-’05 Dyna™ and ’02-Later tourers with stock throttle body and Delphi® ECU. Edelbrock® CNC ported heads are the heart of the package­—to give you the gut-wrenching power that every rider wants. Included in the kit are: Edelbrock® cylinder heads; Edelbrock® Performer RPM Chain or gear driven camshafts; Edelbrock®/JE pistons (10.25:1), rings, wrist pins and pin locks for 95 cu. in. motor; all necessary gaskets; adjustable pushrods...

Base Gasket For 900cc '57-’85 Ironhead XL, 10-Pack — $33.59

440 Shocks For XL, FLH & FXR Models, 12.5" (Hvy.Dty.) — $549.06
440 Shocks For XL, FLH & FXR Models, 12.5" (Hvy.Dty.)

Camshaft For TC88® w/ 246/254 Lift: .619" — $261.65

40", 63mm Inverted Front End w/Standard Trees — $1,870.70

Engage 21" x 2.15", .75" Axle — $930.75

Baker™ Drop Starter DSSC Slam Clutch, Chrome Mechanical — $7,220.75
RSD6 6-speed gearset with 2.3-inch shorter mainshaft. 43 tooth sprocket-basket with 9 friction plates. 28 tooth motor sprocket - no compensator. 88 pitch 428-2 double row chain. O.E. type chain adjustment and shoe. Stock-like 1.54 ratio primary reduction. Doweled top cover for positive location. Compatible with Spyke starters (not included). 66 tooth ring gear for big motors. No jackshaft on the starting system. Hydraulic clutch actuator has a 1.5-inch piston. Mechanical clutch actuator...

Replacement Screen For Stainless Creations Velocity Stacks — $17.00
Replacement Screen For Stainless Creations Velocity Stacks

EFI Controller for 2001-2006 Softail Open loop — $254.99
Comes pre-programmed, wireless and cable free for 5 minute installation. Works with any air filter and exhaust. Full map database included with software CD for PCs. Bluetooth enabled for full wireless tuning capabilities. Eliminates backfiring, pinging, and popping on deceleration, while getting up to 15% increase in horsepower. Up to added 3-6 miles to the gallon. Monitors your ECU 200,000 times per second, constantly updating information for best performance possible.

38", 63mm Inverted Front End w/ Standard Trees — $1,836.35

Forcewinder XR For ’86-Later Evolution® Kiehn CV 40 — $179.31
It’s the original high performance forward-mounted air cleaner! Forcewinder XR fits Buell®, XL, BT and Twin Cams. It is the original forward mounted air intake system. Features high performance and polished aluminum construction. Complete with both K&N® intake and PCV filters, stainless allen bolts and gaskets, and Outerwears® Black Dry Charger weather inhibiting filter wrap. Adapters available to fit S&S® E and G and Mikuni HSR 42/45 carbs. If converting from an OEM setup, an aftermarket mounting...

Flat-Mount Tach/Speedo Base w/ LED Light Bar & Harness For ’74-Later H-D® Risers — $195.49
Flat-Mount Tach/Speedo Base w/ LED Light Bar & Harness For ’74-Later H-D® Risers

Bowl Bolt Street Kit For S&S® Carbs, Blackout — $73.09
Quick and easy carb adjustments! Our Show Kit is designed for use with S&S® E and G carbs. It’s designed to make life easier the next time you make a main jet or accelerator pump adjustment. Show Kits include bowl bolts and enrichment knobs. Street Kit includes bowl bolts only. Show Kit will not work with stock S&S® air cleaners. Street Kit will work with them.

Camshaft For TC96® w/ 254/260 Lift: .600" — $261.65

240/250 WideTire Kit For ’91-’03 XL, Round Swingarm — $1,143.25
Specify year of bike, drive side and tire size when ordering

Compu-Fire 32 Amp Alternator Rotor for Big Twin Harley ’81-’99 — $91.08
Compu-Fire 32 Amp Alternator Rotor for Big Twin Harley ’81-’99

Fender Brace For Stampede™ 200mm Rigid Frames w/ 1.375" Axle Carrier & 9" Wide Round-Top Fenders — $51.00
* The braces are fabricated from by Kraft/Tech from .25" thick steel, then styled to enhance the lines of frame, fender and that big, bad wheel & tire

Upper Filler For ’97-Later FLH Models w/ Trunk Mounts — $144.46
Klock Werks’ easy-to-install upper fillers accent a bagger’s fender to hide stock clutter. They are made of real steel with black e-coating, ready for color- match paint! One version fits the models with or without detachable backrest. The other fits bikes with a detachable tour pack. On FLHX models, the fillers mate up to the stock fender/lower filler combo that comes stock.

Brute IV Belt Drive w/Clutch For ’90-’99 FXST w/ Kickstart — $663.68
Brute IV Belt Drive w/Clutch For ’90-’99 FXST w/ Kickstart

412 Shocks For FXD Models, 12.5" (Hvy.Dty.) — $254.96

Shift Rod End Joints, Female, Single — $16.99

Gold Eagle Talon Air Cleaner Face Plate — $195.49

Weld-On Step Adapters For Building 1.75" To 2.5" Custom Exhaust — $16.15
Home « Product Line « Exhaust Tubing « Weld-On Step Adapters For Building 1.75" To 2.5" Custom Exhaust

Beacon Light Fork Clamp — $84.96

Nomad 17" x 12", 1" Axle — $1,780.75
Please contact MC Advantages at 1.800.726.9620 to ensure correct ordering specifications. Forge-Tec Wheels are rotary forged through their proprietary in house process using only aircraft grade 6061 aluminum. This process makes use of the radial grain structure of the 6061 aluminum to produce a wheel of unmatched strength. All wheels, pulleys and rotors are then CNC lathed and milled using state of the art equipment to insure unmatched quality. They are then polished to a bright luster finish and...

Fuel Tank Liner Kit For Motorcycles — $50.99
With a simple three-step process, the Stampede™ Tank Liner has set new standards for ease of use and reliability in tank lining products. This product stays flexible for its lifetime. A 20-year product history in the agricultural and automotive sectors, it has a proven track record of extreme resistance to gasoline, diesel fuel, alcohol as well as most other fuels and fuel additives.

Perf Grips, Pair — $84.99
* Fits all models with 1" handlebars on ’73-later models, 1" step-down at grip

Constructed from polished billet aluminum — $53.12
For Single Nology Coil On ’82-’85 BT & ’86-Later Softail®

Deviate 17" x 12", .75" Axle — $1,780.75
Please contact MC Advantages at 1.800.726.9620 to ensure correct ordering specifications. Forge-Tec Wheels are rotary forged through their proprietary in house process using only aircraft grade 6061 aluminum. This process makes use of the radial grain structure of the 6061 aluminum to produce a wheel of unmatched strength. All wheels, pulleys and rotors are then CNC lathed and milled using state of the art equipment to insure unmatched quality. They are then polished to a bright luster finish and...

Nomad 19" x 3", .75" Axle — $675.75

Complete Fork Tube Assembly, 14" Over, For ’84-Later FXST — $169.99
Complete Fork Tube Assembly, 14" Over, For ’84-Later FXST

Rigid Frame, Standard, 230-250 Width — $1,133.32
Our DOM steel frames are TIG-MIG welded. They will accept most Evolution®, Panhead and Shovelhead motors. Please let us know what engine you’d like to use so we can ensure correct fitment. Frames that include axle kits have a 3/4" axle unless noted. Frames with transmission mount feature our easy-to-use welded-on transmission plate for better strength and easy alignment. Call your MC Advantages Sales Rep for more fitment information.

Tube Top Caps For Spyke® 63mm Front End — $22.10

418 Shocks For Early FL & FX Models, 11.5" (Std.) — $462.36

Dash For Dressers, Short Style, for Harley — $237.15
Suit yourself with this sleek, streamlined Kustom dash. Visually extend your tank by painting it to match. Note: Dash must be used with a vented low-profile gas cap (not included). Raw, ready-to- paint finish.

Lancer Classic Forward Controls For FXR — $617.95
* Side port master cylinder to accommodate hidden brake line * Custom toe pegs and folding foot pegs with UV resistant rubber * Does not include brake line or shift linkage

Sprocket/Rotor For Sprotor, 51T, Excludes Caliper — $106.25

812 Shocks For H-D®, Flamed, 12.5" — $373.96

Navy Turn Signal Covers, Chrome Red Lens — $84.96
* Turn signal covers are available in Amber and Red by adding 'A' or 'R' to the end of the part #

Cursed Serpent Shifter Knob, Red LED Eyes — $16.99
These mesmerizing knobs roll with rare style. The eyes can flash in slow flash, quick flash or alternating patterns.

Solenoid Repair Kit For ’90-Later 1.8kw H-D® Starters — $25.49
Solenoid Repair Kit For ’90-Later 1.8kw H-D® Starters

440 Series Shocks, Black, for Harley, 11.5" — $502.31

Engage 17" x 12", 1" Axle — $1,402.50

SUPERCEDED TO HK279421D — $580.86
Hooker® Darksides™ are for those who have gone raw or a little more stealthy. These anti–bling pipes are coated in high-temp black ceramic coating, a formula long–ago perfected by the aerospace industry. The matte black finish will always look good and stay easy to clean with its semi-smooth surface texture. Slam on a set of chrome, black or silver anodized billet tips to finish them off with some added contrast! Available separately.

Brake Bracket Kit w/ Left Caliper For D-66 Front End for Harley — $425.00
Brake Bracket Kit w/ Left Caliper For D-66 Front End for Harley

D-66 Front End w/ Phantom Brake Lines, 0º Rake, 7" Over & Single Disc Brake — $2,496.44
D-66 Front End w/ Phantom Brake Lines, 0º Rake, 7" Over & Single Disc Brake

Tribal Mirror Stem — $50.99
Bulletprùf™ stems are sold in pairs. Mirrors sold separately.

Front Brake Line For ’94-’03 FLHR/FLHRI/FLHRCT w/ +6" Front End — $80.71
Front Brake Line For ’94-’03 FLHR/FLHRI/FLHRCT w/ +6" Front End

Locknut Wrench Sprocket — $136.09

Mirror Stem, Streamline, Incudes Bolts, 2 Pair — $50.99
Make Bulletprüf™ mirrors the glitzy topping on almost any style of bike. Combine a chromed stem on the left with a mirror on the right to make your own style statement. All stems are sold in pairs. Mirrors sold separately.

Cable Clamp, 1.25"-1.5" Single Throttle/Clutch — $22.31
Swivel head design allows more natural cable routing without excessive bending

Deviate 16" x 3.5", 1" Axle — $930.75
Please contact MC Advantages at 1.800.726.9620 to ensure correct ordering specifications. Forge-Tec Wheels are rotary forged through their proprietary in house process using only aircraft grade 6061 aluminum. This process makes use of the radial grain structure of the 6061 aluminum to produce a wheel of unmatched strength. All wheels, pulleys and rotors are then CNC lathed and milled using state of the art equipment to insure unmatched quality. They are then polished to a bright luster finish and...

Deviate 18" x 10.5", 1" Axle — $1,440.75
Please contact MC Advantages at 1.800.726.9620 to ensure correct ordering specifications. Forge-Tec Wheels are rotary forged through their proprietary in house process using only aircraft grade 6061 aluminum. This process makes use of the radial grain structure of the 6061 aluminum to produce a wheel of unmatched strength. All wheels, pulleys and rotors are then CNC lathed and milled using state of the art equipment to insure unmatched quality. They are then polished to a bright luster finish and...

Automotive-Style Housing & Ignition Switch Only — $152.99

Warrior 65T 1.5" Pulley — $446.25

WEGO lIlD Wide-Band Exhaust Gas Oxygen Sensor Interface (Supersedes WEGO2D) — $212.97
WEGO lIlD Wide-Band Exhaust Gas Oxygen Sensor Interface (Supersedes WEGO2D)

Cam Installation Tools — $36.59
* Hold all of the tappets while removing and reinstall the camshaft * Prevents the tappets from falling out of the tappet blocks

Complete Engine Gasket Kit For ’99-’06 1550 TC, Excludes ’06 Dyna — $122.39
Complete Engine Gasket Kit For ’99-’06 1550 TC, Excludes ’06 Dyna®

Don Juan 21" x 2.15" Wheel, .75" Axle — $1,988.15

Chrome Sliding Cover Trim Ring For DFACDSC — $29.75
* These marine-grade covers work for models with 6" x 9" design only * Does not fit Electra Glide­ models

Rebel™ Exhaust For 80"+ Softail®, Long, Staggered Side Slash-Cut Ends — $497.20
Rebel™ Exhaust For 80"+ Softail®, Long, Staggered Side Slash-Cut Ends

Plug Wires, 8mm, 7" & 17" For Softail — $16.14
Silicone-jacketed wires allow for maximum energy transfer to ensure that the energy created by any ignition system is delivered to the engine for maximum horsepower.

Vectors Exhaust For LSD Twin Cam — $850.00
Change directions to a completely new look in exhaust design. The Stainless Creations folks have done it again with the development of this pipe with plenty of back pressure! Stainless Creations exhausts are handcrafted in the USA from .065" stainless steel, then hand-polished to a brilliant shine. Every set includes tranny mounting brackets. All are designed for stock LSD or RSD applications with 0" offset. A spacer is required for bikes with offsets. Order spacer kit for ½" or ¾" offsets as needed...

Replacemnt Clutch Pack For PC1298CA — $139.65

Washer Shim Kit for Diaphragm Spring — $5.95

Chubby 8" Drag Bar — $178.46
These thick, 1 1/4" bars have fluid bends at precise angles for maximum comfort and control. They’re pre-drilled for internal wiring, dimpled, diamond knurled and feature an unparalleled show chrome finish.

Steel Inner Hub For PC100CA, ’86-’89 BT — $65.07