www.snoblox-snojax.com

Products : VentSaver P 383 — $62.00
THE CRICKET ELIMINATOR: The larger of two models. We recommend this one for heavy snow areas. This ingenious new product adds support and strength to your vent pipes, chimneys or masts while the innovative fin design cuts through and assists in the shedding of snow and ice from your roof. Installation is quick and easy. The VentSaver P383 Series is made from non-corrosive powder-coated aluminum and stainless steel aircraft cable. Also provided are stainless steel nuts, bolts and heavy duty 1 1/2...

Products : SureBond SB-190 — $9.95
Official Adhesive of SnoBlox-SnoJax.com. Requires 28 days or (672 Hours) at 50 Degrees (F) or above to achieve full cure. Temperatures below 40 Degrees (F) will delay cure time, until temperatures reach 50 Degrees (F) or above to completely cure. SureBond SB-190 provides improved life and durability, and better impact strength and has been approved for use in prisons to secure fixtures. SureBond bonds with concrete, finished metals, painted metals, plastics, fiberglass, pipe, conduit, FRP-plywood...

Products : VentSaver FB 151 — $55.00
THE CRICKET ELIMINATOR: The smaller of two models. This ingenious new product adds support and strength to your smaller vent pipes while the innovative fin design cuts through and assists in shedding the snow and ice from your roof. VentSaver FB-151 series is made from non-corrosive powder-coated aluminum with a pre-punched stainless steel strap to fit smaller sizes of pipe from 1.5" - 4". Also provided are stainless steel nuts, bolts and heavy duty 1 1/2" lag screws. It protects a standing profile...

White Deuce — $3.00
The “DEUCE” can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. They will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. Available in a variety of stock colors: Clear, Brown, Red, Green, White, Light Gray, Dark Gray, Black and Blue. Professional ATI test results show...

Products : SlateGuard Lt Gray — $9.75
The pre-assembled, sturdy 304 stainless steel SlateGuard is an ideal retrofit or new construction solution for slate, asphalt shingle and composite tile roofs. Slots easily engage roof nails. Unique rolled tabs insure the SnoBlox Deuce is held firmly on the strap and a sturdy rivet prevents lift out. The light gray SnoBlox Deuce will match lighter color slate or metal tile roofs. Also available with the choice of clear or 8 stock SnoBlox Deuce snow guards.

Painted SnowCatcher — $5.00
The Painted SnowCatcher is a metal snow guard that resembles the popular SnoBlox and SnoJax models. It is made from zinc plated, mild steel, with 50 available TGIC Polyester powder coated colors. The large forward mounted 2.5” High X 4.5” Wide face provides a generous holding field and the 1.9” wide base fits most 36” panels with 9” flats. The SnowCatcher is available in eight powder coated colors, including mill powder coat. Professional test results show the SnowCatcher held up to 1866 pounds...

Sun Burst Mill — $5.00
The Mill Sun Burst SnowCatcher is a decorative metal snow guard that is made from 304 grade stainless steel, with 50 available TGIC Polyester powder coated colors. The large forward mounted 4.5” Wide face provides a generous holding field and the 1.9” wide base fits most 36” panels with 9” flats. The Professional test results show the SnowCatcher held up to 1866 pounds and the durable construction does not get brittle like cheap fabricated cast guards.

Painted Sun Burst — $6.00
The Painted Sun Burst SnowCatcher is a decorative metal snow guard that is made from 304 grade stainless steel, with 50 available TGIC Polyester powder coated colors. The large forward mounted 4.5” Wide face provides a generous holding field and the 1.9” wide base fits most 36” panels with 9” flats. The Professional test results show the SnowCatcher held up to 1866 pounds and the durable construction does not get brittle like cheap fabricated cast guards.

Mustang Mill — $5.00
The Mill Mustang Horse SnowCatcher is a decorative metal snow guard that is made from 304 grade stainless steel, with 50 available TGIC Polyester powder coated colors. The large forward mounted 4.5” Wide face provides a generous holding field and the 1.9” wide base fits most 36” panels with 9” flats. The Professional test results show the SnowCatcher held up to 1866 pounds and the durable construction does not get brittle like cheap fabricated cast guards.

Products : IceJax I — $2.95
Based on the proven patented Snojax II design, the Icejax I is a miniature version of the Icejax II. It features unique interchangeable sides that can either be mechanically fastened or adhesive mounted. Mount the flat side down on a 3" flat surface or simply flip the unit over to straddle a small minor rib. They will fit most brands of screwed-down 36" panels that have three 12" flats or four 9” flats and the majority of standing seam floating panels with at least a 3 inch flat mounting area. Professional...

Products : SlateGuard Dk Gray — $9.75
The pre-assembled, sturdy 304 stainless steel SlateGuard is an ideal retrofit or new construction solution for slate, asphalt shingle and composite tile roofs. Slots easily engage roof nails. Unique rolled tabs insure the SnoBlox Deuce is held firmly on the strap and a sturdy rivet prevents lift out. The dark gray SnoBlox Deuce will match darker slate or metal tile roofs. Also available with the choice of clear or 8 stock SnoBlox Deuce snow guards.

Products : SnowCatcher Mill — $4.00
The SnowCatcher is a metal snow guard that resembles the popular SnoBlox and SnoJax models. It is made from zinc plated, mild steel, with a clear coat mill finish or eight standard powder coated colors. The large forward mounted 2.5” High X 4.5” Wide face provides a generous holding field and the 1.9” wide base fits most 36” panels with 9” flats. The SnowCatcher is available in eight powder coated colors, including mill powder coat. Professional test results show the SnowCatcher held up to 186...

Products : IceJax II — $5.00
Based on the proven Snojax II design, the Icejax II is the new improved version of the original adhesive mounted clear polycarbonate snow guard. This patented design still features unique interchangeable sides that can either be mechanically fastened or adhesive mounted. Use the flat side down on a 5" flat surface or simply flip the unit over to straddle a small minor rib. Starter points are provided on both sides for mechanically fastening with self-drilling screws. Professional ATI test results...

Products : Master Gripper — $0.25
This is a high quality #14, self-tapping screw that is 2 inches long with an attached neoprene washer. Leland Master Gripper Screws feature Case Hardened Steel construction with DT2000 anti-corrosion protective coating. These 1/4 - 14 X 2" Teks/3 screws feature a pre-threaded Master Seal® Flow Cone bonded washer with and a 3/8” high hex washer head. This screw should only be used for snow guard attachment into wood purlins. Master Seal® Flow Cone Washer use Vulcanized grey EPDM, providing a 10...

Products : StrapGuard — $6.00
Includes one SnoBlox Deuce, one Galvanized Strap (24 Gauge), 2 Stainless Steel Bolts, 2 Lock Nuts, the required Everflex SB-1800 sealant. SnoBlox-SnoJax will determine the number of tubes of sealant required per purchase. Additional tubes of Everflex SB-1800 can be purchased separately. Strap can be cut to desired length. User assembled in the field.

Products : SlateGuard Bronze — $9.75
The pre-assembled, sturdy 304 stainless steel SlateGuard is an ideal retrofit or new construction solution for slate, asphalt shingle and composite tile roofs. Slots easily engage roof nails. Unique rolled tabs insure the SnoBlox Deuce is held firmly on the strap and a sturdy rivet prevents lift out. The light gray SnoBlox Deuce will match bronze or brown slate or metal tile roofs. Also available with the choice of clear or 8 stock SnoBlox Deuce snow guards.

Products : SlateGuard Clear — $9.75
The pre-assembled, sturdy 304 stainless steel SlateGuard is an ideal retrofit or new construction solution for slate, asphalt shingle and composite tile roofs. Slots easily engage roof nails. Unique rolled tabs insure the SnoBlox Deuce is held firmly on the strap and a sturdy rivet prevents lift out. The clear SnoBlox Deuce will match all roofs because it is practically invisible. Also available with the choice of clear or 8 stock SnoBlox Deuce snow guards.

Products : Eco-Blox Recycled — $3.25
The Eco-Blox “DEUCE” can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. This model will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. The Eco-Blox is available in Clear with a slightly darker UV tint. Professional ATI test results show the SnoBlox Deuce held up to...

Red Deuce — $3.00
The “DEUCE” can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. They will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. Available in a variety of stock colors: Clear, Brown, Red, Green, White, Light Gray, Dark Gray, Black and Blue. Professional ATI test results show...

Green Deuce — $3.00
The “DEUCE” can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. They will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. Available in a variety of stock colors: Clear, Brown, Red, Green, White, Light Gray, Dark Gray, Black and Blue. Professional ATI test results show...

Blue Deuce — $3.00
The “DEUCE” can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. They will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. Available in a variety of stock colors: Clear, Brown, Red, Green, White, Light Gray, Dark Gray, Black and Blue. Professional ATI test results show...

Lt Gray Deuce — $3.00
The “DEUCE” can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. They will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. Available in a variety of stock colors: Clear, Brown, Red, Green, White, Light Gray, Dark Gray, Black and Blue. Professional ATI test results show...

Dk Gray Deuce — $3.00
The “DEUCE” can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. They will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. Available in a variety of stock colors: Clear, Brown, Red, Green, White, Light Gray, Dark Gray, Black and Blue. Professional ATI test results show...

Black Deuce — $3.00
The “DEUCE” can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. They will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. Available in a variety of stock colors: Clear, Brown, Red, Green, White, Light Gray, Dark Gray, Black and Blue. Professional ATI test results show...

Med Bronze Deuce — $3.00
The “DEUCE” can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. They will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. Available in a variety of stock colors: Clear, Brown, Red, Green, White, Light Gray, Dark Gray, Black and Blue. Professional ATI test results show...

Products : SnoJax II — $5.00
Invented in 1985, the Snojax II is the first “adhesive mounted” clear polycarbonate snow guard. The patented design features unique interchangeable sides that can either be mechanically fastened or adhesive mounted. Use the flat side down on a 5.25" flat surface or simply flip the unit over to straddle a small minor rib. Starter points are provided on both sides for mechanically fastening with self-drilling screws.

Products : SnoBlox DEUCE CLEAR — $3.00
The “DEUCE” can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. They will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. Available in a variety of stock colors: Clear, Brown, Red, Green, White, Light Gray, Dark Gray, Black and Blue. Professional ATI test results show...

Products : SnoJax I — $4.00
Invented in 1976, Snojax I is the “original” clear snow guard that may only be mechanically fastened through the roof sheet into a structural purlin or support below. Because of the unique rib straddling design, they fit most brands of screwed-down 36" panels with three 12" flats or four 9" flats. The distinctive 8 holes in the face plate provide exceptional water drainage.

Products : SnoBlox ACE — $4.00
The “ACE” can be adhesive or mechanically fastened and requires a 3" flat mounting area. They will fit most brands of screwed-down 36" panels that have three 12" flats and the majority of the standing seam floating panels with at least a 3 inch flat area. The waffled base enhances the bonding power when used with the SB-190. Starter points are provided for mechanically fastening with self-drilling screws. Professional ATI test results show the SnoBlox “ACE” held up to 4849 pounds when screw mounted...

Products : Everflex SB-1800 — $7.75
This is a cold weather sealant, not recommended for adhesive mounting snow guards. Ultra-fast 24-hour curing, one part, long-lasting sealant. Spot-weldable and non-flammable. Immediately weather and water resistant. This item is only to be used for sealant purposes. This item is not recommended on galvalume or galvanized roofs. Service Temperature, Cured: -80°F to +480°F. Application temperatures are from sub-zero to +180°F. Tensile Strength: 360 PSI.

Products : Master Driller — $0.25
This is a high quality #14, self-drilling screw that is 1.5 inches long with an attached neoprene washer. Leland Master Driller Screws feature Case Hardened Steel construction with DT2000 anti-corrosion protective coating. These 1/4 - 14 X 1-1/2" Teks/3 screws feature a pre-threaded Master Seal® bonded washer and a 3/8” high hex washer head. This screw should only be used for snow guard attachment into steel purlins. Master Seal® Flow Cone Washer use Vulcanized grey EPDM, providing a 100% seal ...

5 IN LeafBlox-120 FT Box — $390.00
Most snow guards will hold back the majority of snow and ice on slick, glossy coated, sloped roofs so the frozen mass can melt or safely release in very small pieces. When used in conjunction with our guards, the LeafBlox will act as an iceguard to reduce winter gutter congestion, ice damming and icicles. The black UV treated polypropylene bristles absorb heat on sunny days which in turn accelerates the snow and ice melting process along the gutter to minimize buildup. In winter climates, the combination...