CPO Jet

Jsg-0402 — $42.00
Dynamic counterweight vibration isolators for low vibration sanding

JET 60 - 150 PSI Air Sand Blaster — $14.99
This JET product carries a limited one-year warranty.

JET SMH-1T-20, 1-Ton Capacity 20' SMH Series Hand Chain Hoist — $167.00
CAUTION: Be sure that the support structures and load-attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.

Jsg-9121 — $117.00
Needle scalars can be used either as a scalar or flux chipper by removing scalar attachment

JET 1/4" 25,000 RPM Air Die Grinder — $33.50
Heavy-duty ball bearing construction for vibration-free performance

Features: JET 1 HP 650 CFM Dust Collector — $249.99
Quick-install collection bag makes emptying and re-attaching a snap

JET 1/4" 22,000 RPM Air Die Grinder — $40.00
Heavy-duty ball bearing construction for vibration-free performance

JET SMH-1T-10, 1-Ton Capacity 10' SMH Series Hand Chain Hoist — $122.00
CAUTION: Be sure that the support structures and load-attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.

JET 3/8" 1,800 RPM Reversible Air Drill — $54.00
Ball bearing and needle bearing construction for more efficient performance

Jsg-1046 — $59.99
Handles all kinds of paint, lacquer, stains, enamels, etc

Jsg-0416 — $61.00
Dynamic counterweight vibration isolators for low vibration sanding

Jsm-204 — $81.00
Heavy-duty, ball bearing design for tough cutting jobs and extended tool life

Jsm-31 — $50.00
Variable speed lever throttle for better speed control

Features: JET 2-Ton Capacity 15' 1-Phase Electric Chain Hoist — $1,979.99
Important Before installation, read owner's manual for additional warnings and precautions. Not for use in an explosive environment

Features: JET 1-Ton 10' 3-Phase Dual Speed Electric Chain Hoist — $1,619.99
Reliable DC electro-magnetic brake holds the load even if power is interrupted

JET Parallel Clamp Kit — $190.00
Precision-Rule™ measurement system provides a consistent setup and quick identification of opening capacity

Features: Wilton C-0, Combination Pipe and Bench Vise — $605.00
Proudly made in the USA, the Combination Pipe and Bench round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut, the Combination Pipe and Bench round channel vise nut is anchored at the rear. This rear anchored nut provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly. This enclosure keeps debris out and lubrication...

JET 4" x 20' Black Dust Collection Hose — $43.99
This tough, polyethylene flexible hose, designed specially for dust collection, can be used as either a main or a branch line

Features: JET B3NCH™ 12" Dual Bevel Sliding Compound Miter Saw — $2,339.99
The powerful JET® B3NCH 12" dual bevel compound miter saw has been designed to make easy work of your toughest jobs. The quick cam miter lock table makes it a breeze to change miter settings, the Innovative Green XACTA Laser™, the high performance laser system Exclusively from JET® that projects an accurate, high-visibility guide line for precision cuts, even outdoors, and a powerful 15A ball bearing motor with electric brake makes short work of your toughest jobs. In your shop or on the go, this...

Wilton 6" C-Clamp Carded, 0" - 6" Jaw Opening, 3-1/4" Throat Depth — $9.00
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your WILTON® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

JET JLP-150-5, 1-1/2-Ton Capacity 5' JLP Series Lever Hoist — $197.00
CAUTION: Be sure that the support structures and load-attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.

JET 3/8" 1,900 RPM Air Drill — $85.00
Ball bearing and needle bearing construction for more efficient performance

Features: JET 3/4" Square Drive 5,500 RPM Pistol Grip Air Impact Wrench — $500.00
Features: JET 3/4" Square Drive 5,500 RPM Pistol Grip Air Impact Wrench

Wilton Wilton Bench Vise, Jaw Width 6", Jaw Opening 6" — $89.00
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your WILTON® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

JET 4" x 10' Black Dust Collection Hose — $25.59
This tough, polyethylene flexible hose, designed specially for dust collection, can be used as either a main or a branch line

Wilton Wilton Bench Vise, Jaw Width 4", Jaw Opening 4" — $39.00
Wilton Wilton Bench Vise, Jaw Width 4", Jaw Opening 4"

JET 4" to 2-1/4" Reducer — $4.99
Reducers allow you to step down from a larger size to increase air velocity where you need it the most

Features: JET 10" x 14" 1/2 HP Indexing Mini Lathe — $419.99
The original JET® mini lathe was a real winner when it was introduced many years ago. Our new unit, with indexing and spindle lock, is the new standard in the industry. Put one in your shop today; you'll be glad you did.

Features: JET 6" x 48" Belt / 12" Disc Combination Sander — $1,049.99
Two precision-ground cast-iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally and anywhere in between

JET 4" to 2-1/2" Reducer — $2.39
Reducers allow you to step down from a larger size to increase air velocity where you need it the most

Jsg-0716n — $120.00
Built-in air regulator for positive speed and torque control

JET 13" x 3/8" 16,000 RPM Air Mini Belt Sander — $165.00
This JET product carries a limited one-year warranty.

JET JLP-75-20, 3/4-Ton Capacity 20' JLP Series Lever Hoist — $187.00
CAUTION: Be sure that the support structures and load-attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.

Features: Wilton 600N, Machinists' Bench Vise — $819.99
Proudly made in the USA, the Machinist round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Machinist round channel vise nut is anchored at the rear. This rear anchored nut provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly. This enclosure keeps debris out and lubrication in for a lifetime of smooth operation...

Wilton 1345, Drill Press Vise Continuous Nut, 4" Jaw Opening — $95.99
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your WILTON® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

Features: Wilton AW45, All-Weather Outdoor Vise — $849.00
Proudly made in the USA, the Tradesman round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Tradesman round channel vise nut is anchored at the rear. This rear anchored nut provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly. This enclosure keeps debris out and lubrication in for a lifetime of smooth operation...

JET JWL-1220S Adjustable Stand for JWL-1220 — $189.99
Features: JET JWL-1220S Adjustable Stand for JWL-1220

JET AFS-2ESF Washable Electrostatic Filter for AFS-2000 — $99.99
JET AFS-2ESF Washable Electrostatic Filter for AFS-2000

Jsg-0822 — $139.99
Positive blade retention with adjustable blade guide to increase blade life and depth of cut

Jsg-0717sh — $134.00
Built-in air regulator for positive speed and torque control

Jsg-0735 — $137.00
Variable speed lever throttle for better speed control

Jsg-0719 — $57.00
Variable speed lever throttle for better speed control

JET DI-10, Dado Insert for 10" Table Saw — $24.99
High-density phenolic laminate with frictionless melamine face reduces virtually all splintering and tearout on table saw and dado cuts

JET 18-Gauge 2,600 RPM Air Nibbler — $49.99
This JET product carries a limited one-year warranty.

Jsg-0101r — $33.00
Special heat-treated hardened steel barrel and piston for longer tool life

Jsm-204s — $129.99
Heavy-duty, ball bearing design for tough cutting jobs and extended tool life

Jsm-710 — $57.00
Ball bearing and needle bearing construction for more efficient performance

JET AFS-1B-WOF Washable Electrostatic Outer Filter for AFS-1000B — $41.99
JET AFS-1B-WOF Washable Electrostatic Outer Filter for AFS-1000B

Wilton H408CS, 400-CS Series C-Clamp, 0" - 8" Jaw Opening, 4-1/2" Throat Depth — $59.99
Wilton H408CS, 400-CS Series C-Clamp, 0" - 8" Jaw Opening, 4-1/2" Throat Depth

JET AFS-2OF Replacement Electrostatic Outer Filter for AFS-2000 — $22.99
JET AFS-2OF Replacement Electrostatic Outer Filter for AFS-2000

JET MM-75S-20, 3/4-Ton Capacity 20' Mini-Mite Lever Hoist — $139.99
CAUTION: Be sure that the support structures and load-attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.

JET S-24N Stand for 24" SR-2024N — $149.00
Suitable for many industrial, educational and vocational shop uses

Features: JET 1-Ton Capacity 10' 3-Phase Electric Chain Hoist — $1,389.99
Important Before installation, read owner's manual for additional warnings and precautions. Not for use in an explosive environment

Features: JET 3-Ton Capacity 20' 1-Phase Electric Chain Hoist — $2,599.99
Important Before installation, read owner's manual for additional warnings and precautions. Not for use in an explosive environment

Features: JET 1/2-Ton Capacity 10' 1-Phase Electric Chain Hoist — $1,409.99
Important Before installation, read owner's manual for additional warnings and precautions. Not for use in an explosive environment

Features: JET 1-Ton 20' 3-Phase Dual Speed Electric Chain Hoist — $1,709.99
Reliable DC electro-magnetic brake holds the load even if power is interrupted

JET 2-PT, 2-Ton Capacity Industrial-Duty Plain Trolley — $159.99
Designed for low maintenance and trouble-free operation through a wide range of beams

JET 1/2-PT, 1/2-Ton Capacity Industrial-Duty Plain Trolley — $59.99
Designed for low maintenance and trouble-free operation through a wide range of beams

JET SLT-330F, 330-lb. SLT Series Scissor Lift Table — $221.00
Ideal for lifting, positioning and transporting heavy materials around the shop, factory, warehouse or office

JET 5-GT, 5-Ton Capacity Deluxe Heavy-Duty Geared Trolley with 10' Hand Chain — $199.99
CAUTION: Read owners manual for additional warnings and precautions before use. Failure to read, understand and follow all instructions can result in serious injury. Do not exceed rated capacity. Use clamp only if authorized and properly trained. Do not move unbalanced load. Not for use in explosive environment.

JET 2-GT, 2-Ton Capacity Deluxe Heavy-Duty Geared Trolley with 10' Hand Chain — $189.99
CAUTION: Read owners manual for additional warnings and precautions before use. Failure to read, understand and follow all instructions can result in serious injury. Do not exceed rated capacity. Use clamp only if authorized and properly trained. Do not move unbalanced load. Not for use in explosive environment.

Wilton 3-FC, "O" Series C-Clamp - Full Closing Spindles, 0" - 3-3/8" Jaw Opening, 2-3/8" Throat Depth — $109.00
The full closing, extra heavy duty models are designed to stand up to the demands of heavy industrial applications like those encountered in ship building

Wilton 6-FC, "O" Series C-Clamp - Full Closing Spindles, 0" - 6-1/2" Jaw Opening, 3-3/8" Throat Depth — $209.00
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your WILTON® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

Features: JET B3NCH™ 10" Dual Bevel Sliding Compound Miter Saw — $2,129.99
The JET® B3NCH 10" dual bevel sliding compound miter saw is precise enough for all your home projects and portable enough to take with you when you need a great saw on the job. With dual bevel capacities of 0°, 33.9°, and 45° left and right, a quick cam miter lock, our Innovative Green XACTA Laser™, the high performance laser system Exclusively from JET® that projects an accurate, high-visibility guide line for precision cuts, even outdoors, and a powerful 15 amp, 4800 RPM motor, this saw is the...

Features: JET 6-Ton Capacity 5' JLP Series Lever Hoist — $471.00
CAUTION: Be sure that the support structures and load-attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.

Features: JET 3-Ton Capacity 10' JLP Series Lever Hoist — $321.00
CAUTION: Be sure that the support structures and load-attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.

Features: JET 3-Ton Capacity 15' JLP Series Lever Hoist — $347.00
CAUTION: Be sure that the support structures and load-attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.

Wilton 2-FC, "O" Series C-Clamp - Full Closing Spindles, 0" - 2-3/8" Jaw Opening, 1-3/4" Throat Depth — $77.00
The full closing, extra heavy duty models are designed to stand up to the demands of heavy industrial applications like those encountered in ship building

Wilton 10-FC, "O" Series C-Clamp - Full Closing Spindles, 0" - 10-1/2" Jaw Opening, 4-1/8" Throat Depth — $398.00
The full closing, extra heavy duty models are designed to stand up to the demands of heavy industrial applications like those encountered in ship building

Features: JET B3NCH™ 12" Variable Speed Drill Press — $1,869.99
When is a Drill Press powerful enough to tackle the big jobs, and portable enough to do it anywhere? When it's the all-new JET® B3NCH 12" Variable Speed Drill Press. A powerful 1/3 HP induction motor that pushes through almost anything you throw at it; over 3-1/8" spindle travel for maximum depth cutting, and our innovative X-shaped XACTA Laser that ensures drilling accuracy; makes this workhorse the best choice for in your shop or on the go.

Features: JET GHD-20PF 20" Geared Head Drill Press — $3,999.00
Heavy-duty design allows a variety of precision drilling applications

JET 6" 10,000 RPM Random Orbital Dual Action Air Sander — $69.99
Dynamic counterweight vibration isolators for low vibration sanding

Features: JET 3" Manual Hydraulic Pipe Bender — $499.99
Eight bending dies included standard (1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3")

JET S-16N, Stand for HN-16N Hand Notcher — $199.00
This JET product carries a limited two-year warranty.

Features: JET 48" x 20" 5,500-lb. Capacity Pallet Truck — $309.00
One piece cast iron pump Feature high quality seals, hardened and chrome-plated ram and piston, top-of-stroke and overload bypass valves

Features: JET 3/4 HP 17" 16-Speed Floor Mount Drill Press — $539.99
Extra large 14" x 18" work table which features twin T-slot grooves for miter gauge or homemade jigs, table has lip designed edge for easy clamping of workpiece and a removable insert

Wilton 402, 400 Series C-Clamp, 0" - 2-1/8" Jaw Opening, 2-1/4" Throat Depth — $17.00
Black oxide coated spindles and Perma-pad® resist corrosion, and are replaceable

Features: JET 5-Ton Hydraulic Shop Drill Press — $849.00
Easy-to-use, hand-operated with pressure gauge for direct pressure readings

Features: JET 12" Planer/Jointer Combination Machine — $1,999.99
You don't have to choose between buying a jointer or a planer -- with the JJP-12, you can have both. Leave it to JET® to design a machine that allows quick changeover between jointing and planing functions. This versatile machine features an extra large aluminum extruded fence with centered controls for quick adjustments, a built-in dust chute capable of handling both planing and jointing operations, and a powerful 3-horsepower induction motor that can handle the toughest lumber. A heavy-duty, fully...

Wilton 3VB, Vacuum Base Vise, 2-1/4" Jaw Width, 2-1/2" Jaw Opening — $19.99
Seal vacuum base to any flat, clean and dry surface by pressing base to surface and pulling lockarm 180° into position

Features: JET 6" 2 HP 3-Phase Precision Manual Surface Grinder — $8,749.99
Adjustable longitudinal table stops and cross feed lock are featured

JET 550078 JPB-90-1-1/4, 90-lb. 1,250 BPM Paving Breaker with 6" x 1-1/4" Bushing — $1,260.00
JET JPB-90-1-1/4, 90-lb. 1,250 BPM Paving Breaker with 6" x 1-1/4" Bushing

JET 550077 JPB-90-1-1/8, 90-lb. 1,250 BPM Paving Breaker with 6" x 1-1/8" Bushing — $1,260.00
JET JPB-90-1-1/8, 90-lb. 1,250 BPM Paving Breaker with 6" x 1-1/8" Bushing

Features: JET 10-Ton Heavy-Duty Industrial Toe Jack — $335.00
Ideal for house moving, machinery installation and application at shipyard, bridge, building or plant construction sites

Features: JET GHD-20PFT 20" Geared Head Drill & Tap Press — $4,199.00
Heavy-duty design allows a variety of precision drilling and tapping applications

JET AB-2 2 Drawer Base for JSSG-10 — $59.99
This JET product carries a limited 90-day warranty.

JET 5-Piece Mortising Bit & Chisel Set — $99.99
Converts your drill press into an accurate mortising machine

JET 321729 GH-1440W-3, Lathe with Collet Closer — $8,299.00
D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings

JET SJ-20, 20-Ton SJ Series Screw Jack — $81.00
Contractor quality mechanical jack for all purpose lifts and supports

JET CB-650 Replacement Collection Bag for DC-650 — $54.99
Features: JET CB-650 Replacement Collection Bag for DC-650

Wilton Wilton Multi-Purpose Vise, Rotating Head, Jaw Width 5" — $139.99
Wilton Wilton Multi-Purpose Vise, Rotating Head, Jaw Width 5"

Features: Wilton Super Precision Self Centering Vise — $299.99
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your WILTON® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

JET PLH-1 Profiled Leather Honing Wheel for JSSG-10 — $41.99
Features: JET PLH-1 Leather Honing Wheel for JSSG-10

Wilton 1206, Cam Action Drill Press Vise, 6-3/16" Jaw Opening — $189.99
Easy press locking lever cams the jaw ahead 3/32", exerting a holding pressure that is adjustable from 400 to 1100 lbs.

Features: JET 3-Ton 20' 3-Phase Dual Speed Electric Chain Hoist — $2,859.99
Reliable DC electromagnetic brake holds the load even if power is interrupted

Features: JET 10-Ton Capacity 10' L-100 Series Hand Chain Hoist — $1,350.00
The attention to detail in the design of this series is second to none. The drop forged, carbon steel hooks are quenched and tempered to increase strength and will slowly stretch to indicate an overload situation. Cast steel safety latches, attached with Allen head screws and lock nuts, outclass the industry standard of stamped safety latches. The induction hardened, 100 grade load chain provides 20% more strength then the common 80 grade load chain found on inferior hoists. The double enclosed brake...

JET 1-GT, 1-Ton Capacity Deluxe Heavy-Duty Geared Trolley with 10' Hand Chain — $79.99
CAUTION: Read owners manual for additional warnings and precautions before use. Failure to read, understand and follow all instructions can result in serious injury. Do not exceed rated capacity. Use clamp only if authorized and properly trained. Do not move unbalanced load. Not for use in explosive environment.

JET JBG-6A, 6" 1/2 HP 1-Phase Industrial Bench Grinder — $119.00
If you have things that need cleaning, sharpening, buffing, removing rust, or removing burs from metal, then you need a grinder. The JET® 6" Industrial Bench Grinder features heavy duty construction with powerful, long-life motor for use all day, every day. It comes standard with fine and coarse vitrified grinding wheels, cast iron wheel guards and dust vents, and more.

JET JPT-10DI, Dado Insert For Pro Shop Saw — $38.99
This JET product carries a limited 90-day warranty.

JET 150-Grit, 4-Wraps in Box Sandpaper — $23.99