www.jeeptubes.com

HD Differential cover for D35 — $100.00
Differential protection is a necessary thing in our world; if you take your rig off road, you need it! Here at Jeeptubes.com we are excited to offer the strongest differential covers we've found anywhere! These covers are made from .375 (3/8") thick, US manufactured, A50 Steel Plate (50,000lbs Tensile Strength), and everything is CAD designed, CNC Laser cut, and bent on a CNC Brake (290 Ton). The welds are made by certified welders right here in the US and after welding the ring is machined flat...

HD Differential cover for D44 — $100.00
Differential protection is a necessary thing in our world; if you take your rig off road, you need it! Here at Jeeptubes.com we are excited to offer the strongest differential covers we?ve found anywhere! These covers are made from .375 (3/8") thick, US manufactured, A50 Steel Plate (50,000lbs Tensile Strength), and everything is CAD designed, CNC Laser cut, and bent on a CNC Brake (290 Ton). The welds are made by certified welders right here in the US and after welding the ring is machined flat...

TJ Front Bumper Mounting Tabs — $14.00
Includes 4 tabs (two for the top of the frame rail and two for the bottom). These parts are laser cut out of 1/4" steel plate with radiused corners, and pre-drilled.

HD Differential Cover for D30 — $100.00
Differential protection is a necessary thing in our world; if you take your rig off road, you need it! Here at Jeeptubes.com we are excited to offer the strongest differential covers we've found anywhere! These covers are made from .375 (3/8") thick, US manufactured, A50 Steel Plate (50,000lbs Tensile Strength), and everything is CAD designed, CNC Laser cut, and bent on a CNC Brake (290 Ton). The welds are made by certified welders right here in the US and after welding the ring is machined flat...

CJ Front Bumper Mounting Tabs — $14.00
Includes 4 tabs (two for the top of the frame rail and two for the bottom). These parts are laser cut out of 1/4" steel plate with radiused corners, and pre-drilled.

Tire carrier hinge kit — $48.00
We assembled this package in order to simplify the ordering process for those of you who want all 3 items; spindle, hub and bearings. For most economical shipping select the USPS option when ordering.

TJ, YJ or LJ Rear bumper mounting tabs — $20.00
Includes 2 plates with hole patterns that match the pattern in the rear cross-member and 2 plates to tie the bumper to the tapped hole in the bottom of the frame. Lazer cut from 1/4" plate and pre-drilled. Will fit either the Jeep TJ,YJ or LJ

1.75" Single tube mounting plate, Bolt on — $4.50
This 1.75" hole plate can be used however you see fit, we see them being used primarily as rocker and cage joining attachment plates. When mounting a cage securely through the floor use 2 (1 for either side) and place the tube at least 2/3 of the way through, weld both inside and out, this adds a great amount of shear strength as in a major side impact. The bolt holes are .5" (1/2") so you can use a real sized bolt. .25" HR P&O Steel Plate. Sold each.

Comp Cut Rear Flares — $85.00
Our Comp cut rear flares really don't need much description as they are pretty straight forward in their application. If you've cut the back of your fenders to accommodate larger tires, axle set-back or just want the competition look and still want to drive it on the street, then you'll want these. While they may or may not satisfy the laws in your area they certainly offer enough protection to make them worthwhile. You'll want to weld them to at least 1/8" corner steel for best results.

Smooth Tube Connector 1.75" — $25.00
CNC machined from 1045 mild steel these weld-in tube connectors are the same diameter as the tubing to give a smooth high-tech look to your removeable cage, frame and bumper components (these are great for tying trail stingers and grill hoops together for additional strength). Held together with grade 8, 1/2" socket head cap screws they are easily separated with a 3/8" allen wrench.

Tall Front Winch Hoop — $55.00
Tall profile winch hoop sits about even with the top of the hood. Great protection for the Warn 8274 or similar winches 1.75" x .120 ERW *-does not include braces, bar only

HD Differential cover for Ford 8.8 — $110.00
Differential protection is a necessary thing in our world; if you take your rig off road, you need it! Here at Jeeptubes.com we are excited to offer the strongest differential covers we?ve found anywhere! These covers are made from .375 (3/8") thick, US manufactured, A50 Steel Plate (50,000lbs Tensile Strength), and everything is CAD designed, CNC Laser cut, and bent on a CNC Brake (290 Ton). The welds are made by certified welders right here in the US and after welding the ring is machined flat...

Antenna / Light Mounting Tab — $4.00
These tabs are 2" wide, 2 ½" long and have a 0.600" diameter hole. There are many uses for these little tabs, including: mounting almost any brand of light, CB antenna mount, and off-road safety flag mount. weld them to just about anywhere for just about anything.

Spreader Bar — $35.00
These are 1.75" x .120 ERW with a 45 degree bend on one end and are long enough to be installed on an angle for triangular bracing. Can also be used for a center bar from the center hoop to the windshield spreader bar Trim/notch to fit.

Tire Carrier Deluxe Kit — $69.00
You can now order everything you need to build your own swing-arm style tire carrier in one handy package. Except the steel, of course. This kit ships USPS Priority Flat Rate so be sure to select the USPS option. If you specify UPS you will pay too much for shipping.

Weld-on 15" Beadlock rings — $225.00
Beadlock wheels are becoming the norm rather than the exception on the trails we are pushing ourselves through, and can even be the deciding factor on whether we will try the trail or not. We offer 4 different size beadlock kits and they?re made in the USA like ALL of our products. Ours are plain Jane, no fancy cutouts, no flames, just pure function. We do have a couple of small differences over others; our 15" locks have 33 - .375" (3/8) bolt holes, the 16" have 36 holes, 16.5" & 17" have 39 holes...

Truck spare tire mounting plate — $21.00
This wheel mounting plate is laser cut from 3/8" plate steel and has 6 on 5.5" and 8 on 6.5" bolt patterns to accomodate the Toyotas and full size rigs as well as the Jeeps that have had axle upgrades.

Face Mount Tall Stinger — $75.00
Designed for the builder who wants a smoother transition to his face mounted Stinger. Similar to our original Tall Stinger, this one has 45 deg bends at the end that can be trimmed for a "blended" look as well as picking up some extra length for welding on both sides of a rectangular tube bumper. A little shorter than our TS2 but, depending on how you mount it, still about 34" tall at a 45 deg angle.

Rear Crossmember Support Plate — $35.00
Our Rear Crossmember Support Plate is laser cut from 1/4" plate steel and is intended to not only stiffen the stock TJ rear crossmember considerably but to give you an ideal mounting point for our Rear Stinger and Wrap-Around Rear Bumper as well.

Swing arm hinge hub — $18.00
Swing arm hub for use with our 1" spindles and bearings. Hinge is machined from solid tube, not a pipe welded inside of another pipe like the other guys products. Grease fitting included. 4" tall.

Jeep spare tire mounting plate — $21.00
Spare tire mounting plate is lazer cut from 3/8 plate and pre-drilled for the following hole patterns; 5 on 4.5, 5 on 5, 5 on 5.5

Rear Tire Carrier Hoop — $50.00
Tire carrier hoop simialr to those used on Bulletproof and other bumpers. Weld to the top of a swing arm to attach spare tires, high lift jack or whatever you desire. Made from 1.75 x .120 wall ERW tube. Measures 17" tall at 36" wide and left about an inch long for adjustment.

Tube Corner Gussets — $5.00
Beef up your cage with these stout tubular corner gussets. 1.75" x .120" they're about 5.5" long and pre-notched for quick and easy fit-up.

Rear Spreader Bar — $55.00
This fits TJs, and YJs with the later style roll bar. 1.75? x .120 ERW with 45 degree bends at each end. Intended to sit about 3? off the rear braces from just above the apex of the bend. If placed as intended it will just fit inside both tops and still allow headroom for rear seat passengers. Trim/notch to fit.

Trail Stinger — $50.00
Front Trail stinger, sits about hood height if installed at 25-30 degree angle, about 27" long *-does not include braces, bar only

Rear cage bars for YJ/CJ — $90.00
This is designed for the early YJ and CJ owners who need protection for the family members riding in the back seat. Similar in profile to the TJ rear cage section they are left long to give you the flexibility of choosing the mounting location that best works for you. Add our rear spreader bar for additional cross support and you have one stout cage. Made from 1.75"x.120" ERW and sold as a pair.

Smooth Tube Connector 1.5" — $20.00
CNC machined from 1045 mild steel these weld-in tube connectors are the same diameter as the tubing to give a smooth high-tech look to your removeable cage, frame and bumper components (these are great for tying trail stingers and grill hoops together for additional strength). Held together with grade 8, 1/2" socket head cap screws they are easily separated with a 3/8" allen wrench.

Straight Spreader Bar — $30.00
Straight spreader bar can be used to span between the side tubes just above the dash or overhead. Can also be used in place of the rear spreader bar if you don't need the extra clearance.

Tall Stinger — $55.00
Tall Trail Stinger Intended to be installed at a 45 degree angle, 36" long. *-does not include braces, bar only.