4wheelparts.com

Compact Cooler — $58.99
.

Cable Ties — $135.99
Stock O.E. rubber C-Bushings are subject to the same deterioration problems as other rubber products. Additionally, they do not provide the correct geometry for coil spring Fords with lift equipment. This causes control problems associated with road wander. Maximum tensile strength has been engineered into all C-Bushings.

Stainless Steel Mug — $5.99
.

250 Gift Card — $250.00
.

150 Gift Card — $150.00
.

Battery Tester — $232.99
Protective Rubber Boot For Easy Grip Or Protection,Stores Last 50 Results In Memory,Performs An Automatic Micro-Processed Load Test

Circuit Breaker — $11.99
.

Oil Filler Cap — $3.99
.

Tow Strap — $24.99
With a 20,000lb rating this strap is a super durable aide for recovering the largest of vehicles. Braided nylon construction and reinforced eyelets provide years or reliable service.

TIE ROD END PULLER — $10.99
Remove tie rod ends the correct way. Opening size is 1-1/16” with a pull travel of 2-1/8” Features include a 3/8” drive square port center drive screw and a heavy duty forged alloy steel yoke.

Stock Front Bumper — $66.99
.

Rear License Plate Bracket — $56.99
This bracket mounts to the driver side rear corner of the body. Does not come with mounting hardware or instructions.

Muffler — $85.99
.

Hitch Pin and Clip — $2.99
It's always good to carry a spare Pin & Clip for interchanging ball mounts, tow strap mounts or you never know when you might come across someone in need of one.

Swagman’s 2" Receiver Bike Rack — $108.99
Swagman’s extensive range of bike carriers is strong, durable and versatile. All models include Swagman’s unique Kraton gripper cradle surface to hold the bikes securely in place. Generous spacing between the large V cradles allows for easy loading and ample distance separating the bikes during transportation. The XP models have individually adjustable rotating cradles, which rotate to allow your bikes to be carried with the wheels level to the ground, and come standard with a locking knob for added...

Battery Isolator — $162.99
Isolates Auxiliary Battery From Starting Battery,Distributes Battery Charge On Demand,Shock; Moisture; Corrosion Resistant Insulation,Blue Anodized Aluminum Heat Sinks

Billet Metal Polish — $13.99
Billet Metal Polish Mothers Billet Metal Polish takes our world famous metal polish technology to a whole new level. State of the art cleaners and cutting edge formulation give your billet, forged and finely cast aluminum, brass and other polishable metals the absolute finest finish availableguaranteed. If you've spent big bucks on quality metal accessories, step up to a polish worthy of your investment.

Mag & Aluminum Polish — $8.99
Mag & Aluminum Polish This is our legendary metal polish. Mothers' secret formula balances a brilliant shine with easy use for aluminum wheels and parts, brass, alloys and accessories. Application is just a matter of a clean cloth and a little elbow grease. Mothers Mag & Aluminum polish is strong enough to put a shine to the most neglected metals and gentle enough to use on a regular basis.

Fan Belt — $5.99
.

Maxi Fuse — $2.99
.

Crimping Tool — $78.99
Hardened Steel Frame w/Molded Hand Grips,Streamlined Hand Grips w/Improved Leverage,Ratchet Action Provides Secure Crimps Every Time

XD9000i Self-Recovery Winch — $1,063.99
You'll probably see more XD9000i winches on trail rigs than any other winch. No load line speed of 38-feet per minute and three-stage planetary gearing and the ability to run cool with low amp draw for long winching cycles are just a few reasons why.

XD9000i Multi-Mount Winch Kit — $1,246.39
All the power and reliability of the XD9000i in a portable package. No-load retrieval line speed is fast-38 feet per minute. Integrated control pack protects the winch's electrical components, and the 4.6hp Series Wound motor delivers big torque and power. Plugs into any standard 2 inch Class III receiver hitch and gives you the ability to move the winch from the front or back of your rig. Power is supplied through quick connect plugs. A good choice for full-size rigs and heavier recovery situations...

POR 15® Solvent — $12.99
POR 15®. Solvent. Shipped by ground service only. Used to thin down POR-15 products for spraying.

Circle Track 500 CFM Rochester 2G Carburetor — $290.99
Small Diameter Float For Maximum Float Bowl Volume,Modified Based On Engine And Vehicle Specs,Modified Idle/Transition/Accelerator Pump,Using The Highest Quality Parts

Receiver Cover — $19.99
.

Jeep CJ Rebuilder's Manual — $32.99
Jeep CJ Rebuilder's Manual. Is it time to rebuild your Jeep’s axles or install a locking differential? Does your CJ need a frame-off restoration? Between the covers of these two manuals you will find the unit repair and overhaul steps for completely rebuilding a 1946-71 or 1972-86 Jeep CJ! If engine, transmission, transfer case, axle, steering, electrical, or metal restoration seem difficult or beyond your skills, here is the fix! Jeep expert, automotive instructor, and author of the Jeep Owner’s...

Handheld Spotlight — $20.99
.

Differential Cover — $145.99
High tensile, solid nodular iron differential cover. Ideal for competition rock crawling or use on extreme off road trails.

Stainless Steel Door Hinge Kit by Rugged Ridge — $608.99
Complete stainless hinge replacement kits for 07-09 Wrangler will totally change the look of your Jeep! Each component is constructed of cast, prime 304 stainless steel and includes all the components necessary to up-grade your Jeep including inner door mounts. All hinges fit factory mounting points and include rust free stainless hardware for a long lasting look.

Deluxe Bike Carrier — $195.99
.

NP231 Slip Yoke Eliminator Kit — $247.99
Have you lifted your Jeep and now have driveshaft vibration problems? Install this Slip Yoke Eliminator kit and reduce or eliminate that annoying noise and vibration. Transfer case tailshaft length is reduced by 6.5 on '97-'03 Wranglers and 4.25 on '88-'95 Wranglers reducing the driveline angles. Kit comes with a heavy-duty rear output shaft which is shorter and has 18% larger spline diameter and a 54% increase in torque capacity. New aluminum rear output housing, bearings, seals, snap rings, bolts...

Transmission and Transfer Case Crossmember — $83.99
.

Adjustable Door Strap — $3.99
This strap will help keep any door manageable, easy installation and adjustment lets your open the door to your desired maximum position.

Exact Fit® Wiper Blade by Trico — $6.99
These blades are manufactured as a direct replacement for your Jeep®. No need for any adapters. Just snap them on, and you are on your way. Revolutionary ExactFit® wiper blades from TRICO are the first wiper blade line to install in seconds. TRICO has taken the extra step of pre-assembling the wiper blade so that the blade's receptor exactly matches the specific arm style of the vehicle.

Super Swamper TRXUS MT Radial Tire; 33 x 12.50R-18 — $251.99
The new Interco TRXUS MT is designed for the driver that needs a good traction tire, but still wants a tire that rides & wears good on the street. Sold individually. Note: Our Standard Shipping rates DO NOT apply to tires. Tire-Specific shipping charges apply. Sales rep will contact you with price. F.E.T tax not included in the price of tire. *Crate charge of $9.75 applied per tire, not included in the price.

Transmission/Transfer Case Crossmember — $83.99
.

PowerBall — $27.99
PowerBall The patent pending Mothers PowerBall is the first foam polishing tool designed to revitalize billet, diamond plate, polished aluminum, stainless steel, plastic lenses, convertible top windows and much more. When used with Mothers PowerMetal polish, the PowerBall is ideal for use on any uncoated, polishable metal finish. Its unique and durable construction compresses to fit tight spaces, so polishing difficult, intricate metalwork to a mirror like finish is fast and easy.

Bestop Replace-a-Top™ with Tinted Windows — $529.99
Replace-a-top™ top only fits on factory hardware and door frames. Kit includes: top, windows, doorskins and snaps. No drilling or snap relocation required. Jeep® label sewn in top.

Boat And Canoe Carrier — $180.99
.

Complete Bushing Kit by Prothane — $272.90
If a total Jeep rebuild is in your future, then save money when you buy a polyurethane bushing kit! Replaces all the major rubber suspension components with polyurethane.

Starter Solenoid — $22.99
.

Windshield Frame Ventilator Cover — $31.99
.

Formula GT; Steering Wheel — $114.99
Hand Stitched Leather Grained Vinyl Grips,Matte Black Rubber Styling Sleeves,Machined Racing Holes,Polished Anodized Aluminum Spokes

Rugged Ridge Off-Road Organizer — $9.99
Custom designed glove box organizer made just for Jeep. Jeep Glove boxes are smaller than most other vehicles therefore they need a custom made organizer to hold all your valuables and loose papers

Premium Manual Hub Kit — $175.99
The WARN Premium Hub is a no-compromise hub designed for the hardcore off-roader or truck owner who will accept nothing less than the industry standard in performance. The all metal construction and Zink Aluminum Alloy dial ensure years of reliable functioning. This dial requires a full 9/10ths of a turn to ensure positive engagement of the inner drive gear to the clutch ring. To make sure they stay engaged, WARN premium hubs use a thick internal wave spring and heavy dial detents. We know our premium...

4” X-Factor Plus Comp Long Arm Suspension System by Rock Krawler — $3,799.99
Rock Krawler is proud to bring you the TJ COMP 4.0 X Factor Plus Suspension System. The X Factor Plus Systems are the best performing trail systems ever made for Wrangler TJ’s! These systems feature our revolutionary independent 3 link front end with track bar. This design dominates the professional world of rock crawling while also maintaining perfect street ability and precise handling. The upper control arm is full length so caster change is kept to a minimum. The front upper bushing in the differential...

Exhaust Adapter — $28.99
These covenant adapters we designed to allow you to fabricate your own exhaust system with out the need for a professional tube machine. These adapters allow you to connect two different size tubes with ease.

7” Round Quad Bar Headlight Kit, Xenon Hyper White by Delta — $108.99
Designed specifically for Jeep® Wrangler, the Delta Quad Bar Headlight is a direct replacement for your stock underpowered headlights. They feature an integrated quad bar reinforcement that protects the bulb from breakage and a lead crystal lens encased in metal parabolic reflectors. Each kit includes one pair of headlamps and bulbs.

Smittybilt Custom Fit Neoprene Front Seat Covers Black / Red — $149.99
.

Toyo Proxes 275/70R16 — $124.99
The Proxes S/T™ is a high performance tire that delivers a powerful combination of superb handling, confident all-season performance and a smooth, stable ride. The H, V, W and Y speed-rated Proxes S/T offers plus-sizing opportunities on pickup trucks, sport utility vehicles and Original Equipment fitments on high performance crossover SUVs.

Advance Adapters GM to 4L60E Automatic Transmission with removable bellhousing — $546.99
Advance Adapters GM to 4L60E Automatic Transmission with removable bellhousing

Shackle Frame Mount Brackets with Greasable Bolts by Warrior Products — $63.99
These Shackle Frame Mounts are die formed and jig welded from 1/4” steel and will not unwind thanks to reinforcing gussets. Available with or without Greasable Bolts. Sold in pairs.

Angled Rolled End Exhaust Tip — $624.99
High Quality/Mirror Polished T304 Stainless Steel,Finish Off Your MBRP Inc. Exhaust In Style,Clampless/No Weld Install

Boomerang Greaseable Shackles by Mountain Off-Road Enterprises — $97.99
These shackles are the same as the M.O.R.E shackles. But they have boomerang shaped side plates that allow it to clear the rear crossmember on full suspension compression, or in the front to act as an Anti-Kick-Back type shackle. They are 4-3/4 center to center and will give the vehicle a slight lift depending on the part number purchased. Includes 4 1-1/4 Diameter bushings for frame, 4 1-1/2 Diameter bushings for springs, for BDS, Skyjacker, Trailmaster and ProComp springs.

Standard Manual Hub Service Kit — $27.99
The Hub Service Kits are designed to supply you with all the small parts necessary to rebuild one locking. The Kit includes all the snap rings, gaskets, retaining bolts and O rings as needed for your style hubs.

Rear Spring Shackle Hangers by 4Wheel Drive Hardware — $57.99
Our heavy-duty spring hangers are a direct replacement for those who want to convert their CJ's to YJ Wrangler 2.5 wide springs for serious off-roading needs. Sold in pairs and uses 1-1/4 bushings.

Stainless Steel Hood Hinge Kit by Rugged Ridge — $115.99
Complete stainless hood hinge replacement kits for 07-09 Wrangler will totally change the look of your Jeep! Each component is constructed of cast, prime 304 stainless steel and includes all the components necessary to up-grade your Jeep. All hinges fit factory mounting points and include rust free stainless hardware for a long lasting look.

60" Rear Bumper by Hanson Enterprise — $498.98
Hanson Enterprise Bumpers use patented 45° forming for better approach and departure angles and are constructed of tough 3/16 thick hot rolled plate steel with 3/16 thick mounts and 1 thick high-yield steel clevis tabs. Front bumpers have a winch deck that is dropped 2” for better airflow and lower center of gravity, and they come with a 1/4 thick fairlead mounting plate that fits most planetary gear style winches. Rear bumpers incorporate a 2 receiver and an optional 1-3/4 diameter greasable spindle...

Litegrip Billet Aluminum Atlas Twin Stick Transfer Case Shifter Knobs — $70.99
Litegrip Billet Aluminum Atlas Twin Stick Transfer Case Shifter Knobs. Introducing the New Billet Aluminum Colored Anodized Finish Shifter knobs by Litegrip, Machined from solid billet aluminum, with shift pattern milled into shift knob. There is no drilling or tapping required to install, shifter knobs come drilled and thread tapped to fit application.

Stainless Steel Exhaust Tips Exhaust Tips — $46.99
.

Rear Bumper by Hanson OffRoad — $898.99
JK Rear Bumper with spindle mount for a tire carrier. This is the rear bumper only, it has the spindle attached so that you can add a tire carrier in the future, #CTC2-P. Bumper is made of 3/16 steel, that is laser cut and formed. It has a built in 2" receiver. The tire carrier mounts to our spindle that has been in use for years with great success.

Atlas II Twin Stick Transfer Case Shifter Knobs by LiteGrip — $55.99
Introducing the new billet satin finish transfer case shifter knobs by Litegrip. Machined from solid billet aluminum, with shift pattern milled into shift knob. There is no drilling or tapping required to install, shifter knobs come drilled and thread tapped to fit application.

Lamp Kit 520 Series Ion crystal Fog Black — $235.99
PIAA’s number one selling lamp – period. Without question the number one best selling truck lamp on the market today. The 520 compliments more brush guards than any other lamp available. The reason? Simply the best combination of fashion and performance in its class. No brush guard should be without a set of PIAA 520s!

Wheel Cylinder by Omix — $18.99
2001-06 TJ Wrangler, Rubicon and Unlimited;Fits driver or passenger side;For 9" brakes;Model 35 rear axle

Blue Torch Fabworks Angle Link Tab Set for Dana 60/14 Bolt — $23.99
Laser-cut from 5/16" thick high-strength steel plate. The brackets are designed to work on axle tube diameters from 3 1/8" to 3 1/2". The shorter bracket measures 1 1/2" from the edge of the axle tube to the center of the bolt hole to accommodate the largest of suspension joints. The bolt hole size is laser cut to 5/8" but could be drilled up to 1" if necessary. Double-triangulated four-links require the bottom links to come off the axle tube at an angle so the links can meet just under the transfer...

Jeep® Authentic T-Shirt — $19.99
Made of 100% preshrunk cotton. Double needle stitched on sleeves and neck Authentic JEEP No.284 Freedom and Capability Since 1941. Available in Vivid Red Medium, Large, X-Large & XX-Large.

36MM Front Axle Nut Socket — $9.99
Indispensable for removal and installation of axle nuts on all wranglers. These hard-to-find 36 mm sockets are available in either chrome plated or impact versions. Features 1/2” drive 6-point design. Heavy duty chrome molly alloy steel construction.

Goodyear Wrangler DuraTrac — $259.99
The new Wrangler DuraTrac features TractiveGroove Technology to help get the job done. Offering enhanced traction in deep mud and snow, the Wrangler DuraTrac is a hardworking tire for drivers who don't know the meaning of the word quit.

Taillight Guards by Smittybilt — $99.99
Smittybilt stainless steel accessories have factory styling and are formed to exact specifications to complement your Jeep. All are manufactured from solid cast 304 “Marine Grade” stainless steel and have a Electrostatic polished mirrored finish. Easy to install! No drilling or modifications to the vehicle. Includes stainless steel hardware.

Speedometer Pinion O-Ring — $3.99
.

Jeep® CJ2A Since 1941 T-Shirt — $19.99
The U.S. Military Issue CJ2A is encircled by the Jeep CJ2A Since 1941 logo and printed on a Black background. 100% preshrunk cotton with double needle stitching on sleeves and neck. Available in Navy. Medium, Large, X-Large, & XX-Large.

Rain Gutter Mount by Kargo Master — $46.99
1984-01 XJ Cherokee;Black powder coat;Without luggage rack;Safari Series Rack mounting brackets;Required for mounting Safari racks to vehicle

Pro Comp X Wrench — $32.99
.

CQRX100U CD Player by Panasonic — $99.99
CD receiver with built-in MOSFET amplifier (18 watts RMS CEA-2006/50 peak x 4 channels). Plays discs loaded with MP3 and WMA files. Includes a SQ3 3-band equalizer with six preset sound curves. Inputs: front-panel auxiliary input. Outputs: one set of preamp outputs.

KAC6404 4 Channel Amplifier by Kenwood — $150.99
Adding an amplifier like the KAC-6404 can bring new life to any audio system. This 4-channel amplifier will dramatically improve sound quality with 500 watts of power and features like MOSFET switching and built-in variable low-pass and high-pass filters.

Mopar 4" Premium Tubular Side Steps — $477.99
Premium Tubular Side Steps are constructed of lightweight anodized satin black aluminum. Include molded end caps wide skid-resistant stepping surfaces and all hardware and mounting brackets, No drilling required.

T176-T177 Master Overhaul Kit — $98.99
1980-86 CJ;For T-170 series transmissions;Kit includes all bearings, small parts kit, gasket and seal kit

OEM Factory Replacement Tailgate by Mopar — $561.99
.

Front Drive Shaft U-Joint (small u-joint) — $32.99
.

10” Capless Subwoofer by Sony — $89.99
Sony's made a sub that sounds as interesting as it looks. The five-sided design of the XS-L104P5B 10" sub keeps the polypropylene cone stiff and helps to reduce standing waves found in round subs that can negatively affect bass output and cause distortion. A thick rubber surround keeps the cone properly centered to create the kind of bass that'll draw a crowd. The XS-L104P5B also draws attention for its exceptional power-handling ability — it'll devour up to 330 watts RMS, without taking a serious...

Thermostat, 180 Degree — $6.97
.

9006 51W=115W XTRA XTREME WHITE PLUS BULB, SINGLE — $43.99
Xtreme White Plus is PIAA’s best selling technology. The blue top coat* on these bulbs add a slight blue tint to the lamp while still providing outstanding performance. PIAA offers the 9000 Series Xtreme White Plus in four distinct types – 9004, 9005, 9006 and 9007. Manufactured to SAE recommended specifications and DOT compliant.

Dual Steering Stabilizer by Skyjacker — $125.99
Steering stabilizers are engineered to restrain bump steering and front-end vibration. Each kit comes complete with all necessary brackets, hardware and polyurethane boot to protect against the elements. *Will not work with factory sway bar or spring over axle conversions. **Will only work with a 4 suspension lift kit.

Hood Catch Kit by Smittybilt — $59.99
Replace those worn out factory hood catches with a new set of Stainless Steel or Black powdercoated catches. No drilling required, Sold in pairs.

Brake Line Tab by Blue Torch Fabworks — $1.99
The BTF Brake Line Tab is used when mounting a hard brake line to the chassis or axle tube. The dimensions of the tab are 1 1/16 wide x 1 5/16 tall with a 5/8 hole. The tab is stamped from 1/8 steel plate.

Mopar Door Entry Guards — $85.99
Door Entry Guards help protect the interior door sills from scratches. Available in brushed stainless steel and black plastic and feature vehicle logo.

Omix Complete Hood Set — $67.99
*Includes cowl vent overlay and windshield tie down kit. Add style to your Jeep® without breaking the bank! Omix Stainless Steel & Black Powder Coat accessories are high-quality products that are reasonably priced. And easy to care for too! The Stainless Steel requires only an occasional waxing to keep their mirror-like shine. Accessories include all mounting hardware.

Bestop Supertop® JK Two-Piece Front Doors — $437.99
Two-piece soft doors provide protection from the elements while offering the versatility of just a lower soft door. Adjustable door pins and collars ensure an exact fit. Velcro seals upper and lower doors together and double-bulb weather stripping surrounds door. Bestop® rotary latch paddle handles close on factory door pins. Standard latch paddle handles close on provided door strikers.

CDXGT120 CD Player by Sony — $79.99
Get high-powered Sony sound at a budget-friendly price with the CDX-GT120 CD receiver. A muscular built-in amplifier brings your music to life — the CDX-GT120 uses the same amplifier and CD section as Sony's more expensive models, so you get the same great CD sound and performance. EQ3's tone settings let you change the sonic landscape with the touch of a button or use a 3-band equalizer to create your own settings. The handy front-panel input makes it easy to connect a portable music player. Or...

Diamo Series DI 26 Karat Wheel — $172.99
One of the more distinguished lines of custom wheels in the industry, Diamo wheels are everything you could ask for in a car or truck wheel. If you are needing wheels for your Escalade, Expedition, or Navigator, these rims should be able to accomodate your truck rim needs. Hubcentric Ring included where applicable.

Vertically Driven Koolshade Brief Top — $47.99
Summer would not be the same without this new and unique Koolshade Brief Top. This new high tech mesh fabric allows cool breezes to flow thru while keeping the sun’s heat and UV Rays out. Koolshade will not flap or ballon in the breeze, just feel the breeze flow thru while you cruise and listen to your favorite tunes. Available in Black, American Flag, Pirate or Confederate Flag.

4Wheel Drive Hardware Fiberglass Body Tub — $2,649.99
We use only GP polyester resin and chopped strand fiberglass with the highest quality knitted fiberglass reinforcements. This special material is also used in the construction of hockey sticks and snowboards, two items that experience constant impact and abuse, which makes it perfect for off-roading or rock crawling. The production process incorporates Nida-Core® Honeycomb reinforcement that allows the fiberglass resin to be fully bonded and our patented Unishell Plus™ insulation-filled, double wall...

Steering Shaft U-Joint — $26.99
.

MSD Ready-to-Run AMC Distributor — $478.99
MSD Ready-to-Run AMC Distributor. Finally an answer for your AMC’s worn out breaker points distributor! This new Ready-to-Run Pro-Billet Distributor has a built-in inductive module that produces up to 7.5 amps to create a high voltage spark at the plug. This spark improves combustion of the fuel mixture resulting in quick starts, a smooth idle and great performance. Since this distributor has it’s own ignition module there is no need to run an MSD Ignition Control. Installation is simple with only...

Part Number: MIC10825 — $202.99
.

Part Number: W/PMO95779063712N — $151.99
.

Part Number: MIC17159 — $372.99
All-Season Handling. MICHELIN Latitude Tour HP tires showcase powerful all-season handling and confidence.

5PC PLIER SET — $25.99
Contains: 7-1/2” Diagnal Cutter, 10” curved jaw locking plier, 8” long Nose Plier, 8” slip joint plier, 12” groove joint plier. Black matte, double cushion grip covered handles, heavy duty drop forges steel jaws, milled jaws hardened and tempered.

Part Number: WAR15276 — $131.99
.