Quality Tools for Less

Hanson 73136 BIT DRI SET 13PC TURBOMAX — $19.99
Self centering tip for clean, fast starts. Jet Point® tip for clean entry and faster drilling and stays sharp. Drills more holes and is faster than other leading drill bits. High speed steel features a black body and gold flute. Three flatted shank on 3/16" and above for a better chuck grip. Contains: 1/16" through 1/4" by 64 threads.

DEV802172 - DeVilbiss Auto Refinish Products GTi Millennium HVLP Gun Without Cup — $306.99
The Ultimate HVLP Base Coat/Clearcoat Gun Excellent valve Three guns in one GTi Gravity Gun Includes: - 1.3mm, 1.4mm, and 1.5mm fluid tips - High output air adjusting valve with gauge - Spray lube, fluid filter, gun hook

MagLITE S3D096 Mag-Lite Flashlight 3-Cell D, Smoke-Smoke — $23.99
Considered to be the finest flashlight in the world. Designed and built to last a lifetime. This is why more police, security, emergency, medical and fire professionals around the world rely on Mag-Lite flashlights. Designed, engineered and made in the USA. Features: Adjustable beam, krypton bulb (extra included in tail cap), self cleaning switch, finest metal contacts, computer designed reflector, high-grade rubber O-rings are exceeding resistant to water and shock, corrosion resistant anodized...

Vise Grip 321GS 3 PIECE KITBAG 10WR, 6LN, 5WR — $32.99

Lisle 64250 SCREWDRIVER RATCHETING RIGHT ANGLE — $14.99
Use where a screwdriver won't fit. Makes it easy to remove and install molding around fender wells and other tight places. Place handle over the bit and turn. Reverse handle on bit to tighten.

Streamlight 72101 KEYMATE TITANIUM WHITE LED — $11.99
STL72001(Black - White LED). STL72101(Titanium - White LED). STL72004(Black - Blue LED). STL72104(Titanium - Blue LED). STL72003(Black - Green LED). STL72103(Titanium - Green LED).

ROB15300 - Robinair VacuMaster 3CFM Vacuum Pump - 2 Stage — $239.99
Robinair performance at a value price. 115 volt, 2-stage design. 1/2" ACME and 1/4" MFL intake fitting. "No-hassle" over-the-counter replacement warranty. 115 volt, 2-stage design. 1/2" ACME and 1/4" MFL intake fitting. "No-hassle" over-the-counter replacement warranty.

Mag Instrument S6D016 FLASH LIGHT 6 D CELL BLACK — $27.99

Mechanix Wear MFF-02-010 GLOVES FAST FIT RED LARGE — $13.99
New opening elastic cuff with wrist pad. Two-way stretch Spandex padded back. Concealed interior seam stitching prevents snagging. Synthetic leather fingertip reinforcements provide strength and protection. Supple, breathable, durable synthetic leather palm.

ROB15600 - Robinair 6 CFM 2-Stage Vacuum Pump, R-12/R-134a — $285.99
Specifications: Free air displacement: 6 CFM Number of stages: Two Factory micron rating: 20 microns Intake fitting: 1/4" MFL and 1/2" MFL Oil capacity: 15 oz. (148 ml) Motor size: 1/2 HP Voltage: 115V 60 Hz Weight: 27 lbs.

Chicago Pneumatic 1/2" Impact Wrench - CP 749 — $156.99
1/2" square drive. 50-450 ft./lbs working torque, 625 ft./lbs. max torque. 6400 RPM. Produces 95.4 dB of noise.

LIS12800 - Lisle Master Pneumatic Bearing Race and Seal Driver Set — $84.99
Master Set contains 11 drivers to fit automobiles and trucks up to 1 ton. This set also includes 2 handles, one for hammering and a pneumatic handle for use with an air hammer. Use the tapered driver side for bearing races; reverse to the flat side for seals. To add the pneumatic handle to your current set order a 12820 pneumatic driver. Molded case. Set Contains: Driver: 12610 (1.565), 12620 (1.750), 12630 (1.965), 12640 (2.325), 12650 (2.555), 12690 (2.830), 12700 (2.995), 12710 (2.470), 12810...

Kershaw 1620ST SCALLION SERRATED — $31.99
SpeedSafe. Locking Liner. Thumb Stud. Pocket Clip. 5-1/2" overall open length.

Streamlight 25123 SL-20XP/LED ORANGE RECHARGEABLE FLASHLIGHT — $113.99
Halogen main beam. Trio of close range LED’s. Combination lets you choose a super bright beam or an incredibly long run time. LED run time 100-plus hours. Halogen run time 1.5 hours.

TPIF18TE - TPI Industrial 1/8 HP 18" Floor Fan — $83.99
Blade size: 18" 3200/4700/5750 CFM Motor: Enclosed, 3-speed 1-phase 120V sleeve bearing permanently lubricated. Switch: rotary. Cord: 10' SJT type 3 conductor. Head tilt: 360-degrees. Guards: Double locking chrome plated. Blade: steel hub/spider aluminum paddles. Motor: 1/8 HP. Amps: 2.2 1-Year Warranty.

Mechanix Wear MG-05-008 GLOVES MECHANIX SMALL — $22.99
Synthetic leather fingertip reinforcements provide strength and protection. Concealed interior seam stitching prevents snagging. Dual-layered fingertips and thumb. Two way stretch Spandex® padded back. Streamlined elastic cuff with hook and loop closure. Supple, breathable, durable Clarino® palm.

MLW0719-22 - Milwaukee Electric Tool V28 Sawzall Reciprocating Saw Kit — $447.99
The Milwaukee Cordless V28 Sawzall Reciprocating Saw uses a high powered Milwaukee built motor to deliver faster cutting and performance. Powering the saw the revolutionary 28 Volt Lithium-Ion battery pack, exclusively from Milwaukee. The 28 Volt battery pack weighs less than an 18 Volt pack, yet delivers two times the run-time, making this the ideal solution in cordless reciprocating saws. The battery is positioned so that it does not interfere with plunge cutting capabilities. This Sawzall saw...

OTC7215 - OTC Exhaust Back Pressure Gauge — $172.99
Now there's a fast, easy way to read exhaust back pressure to help determine the extent of restriction. Simply insert the No. 7215 into the oxygen sensor hole. Large, easy-to-read gauge clearly shows pressure from 0-8 PSI. Specially designed tip provides more accurate pressure reading while stainless steel braided tube withstands high-heat engine conditions. A universal adapter is also included for vehicles with thermactor systems. For use on GM, Ford, Chrysler and imported vehicles.

CPSVP2S-KIT - CPS Products 1.9 CFM PRO-SET Vacuum Pump With Manifold Gauge Set and 3-in1 Can Tap — $221.99
Kit includes: 1.9 CFM 1/4 Hp Single Stage Vacuum Pump (CPS VP2S): - Multi-voltage operation - the vacuum pump can be quickly converted to 115 or 230-volt operation. - Sure grip handle - ergonomically designed for portability. - Solid rubber base for improved shock resistance. - Air cooled motors for operating under high temperature conditions. - Ultimate vacuum ratings of 75 microns. - Double intake - connections 1/4" SAE and 3/8" SAE male flare ports for use with mobile or stationary systems...

Chicago Pneumatic 1/2" Super Duty Extended Anvil Impact Wrench - CP 749-2 — $177.99
One hand push button forward/reverse power regulator. 4 positive power settings in forward and ultimate power in reverse. Compact design with comfortable contoured handle

Mechanix Wear HMG-05-010 GLOVES .5 ORIGINAL SEPTON TREATED LARGE — $21.99
.5mm Septon®-treated Clarino® synthetic leather. Two-way, form fitting stretch Spandex back. Concealed interior seam stitching. Lycra® insert panels between fingers. Streamlined elastic cuff with hook and loop closure.

Meguiars W4000 PAD WOOL CUT N SHINE 8IN — $15.99
Aggressive cutting action without leaving typical difficult to remove swirl marks

OTC7507 - OTC Universal Inner C.V. Joint Puller — $44.99
Removes most C.V joints having hidden retaining rings without damage to transmission case, boot or bearing. Services most GM, Ford, and Chrysler vehicles. Use with OTC 1155 slide hammer

KD Tools 204 BATTERY TERMINAL PLIERS SPREADER/CLEANER — $20.99
Clean and spread battery cable terminals with this pliers-type tool. It's simple to use. Simply squeeze the handle to spread the clamp. This is a handy tool to have in your box!

KNI7111200 - Knipex Lever Action Mini Bolt Cutter with Spring - 8" — $51.99
Cutting edges induction hardened (64 HRC) and factory tested Designed to cut piano wire and other solid wire with minimum effort Exceptional cutting performance through lever action Spring assisted action and handle lock Ergonomic design & plastic coated handles 8" overall length

OTC927 - OTC 10 Ton Push-Puller — $105.99
Can be used with OTC 1123 bearing puller attachment, 679 pulley pulling attachment, 1150, 1151, 1152, 1153 internal pulling attachments

OTC7269 - OTC Bearing Locknut Socket — $34.99
For use with 1985-newer Ford F-series 3/4 and 1 ton truck with Dana 80 Rear axle

Lisle 39750 AXLE NUT SOCKET 34MM X 1/2IN. DRIVE — $15.99
Forward Axle Nut Sockets used for all 34mm axle nuts.

Meguiars M0616 CLEANER/WAX ONE STEP — $11.99
A single step to brilliant protection. The right wax for many users is one that cleans, polishes and protects all in one simple step. Meguiar's Cleaner/Wax fills this need. Applied by hand or machine, it removes light oxidation and lays down an extremely durable high-gloss finish. Made For professionals.

S K Hand Tools B1618 WRENCH BOX END 1/2X9/16IN. 12 POINT RAISED PANEL — $8.99
SuperKrome® finish provides long life and maximum corrosion resistance. SureGrip® hex design drives the side of the fastener, not the corner. Box ends are offset for improved hand clearance. Made in the U.S.A. Lifetime warranty.

OTC 6903 OIL FILTER SOCKET FOR FORD MAZDA 2.3L ENGINES — $15.99
Oil Filter Socket at precise 75.6 mm size. Works on 2.3L engines found on Mazda 3, Mazda 5, Mazda 6, Ford Fusion, Mercury Milan and others. Metal construction for durability. Precise size will not destroy oil filter. Saves the technician time and money.

THE415 - Thexton Ford Distributor Gear Installer and Remover — $42.99
Works on all Ford vehicles with TFI-IV ignition systems, 1983 and up. Removes and re-installs distributor gear so Hall Effect Switch may be serviced. Steel tool won't stress gear teeth or damage gear and shaft.

SK 21 PC SureGrip Combination Screwdriver and Pry Bar Set - SK 86316 — $132.99
Contains: 1/4"x.045"x1.52", 1/4"x.050"x3.96", 5/16"x.055"x5.87", 3/8"x.070"x8.00", 3/8"x.070"x9.90" SureGrip Round Screwdrivers; #1x3.00", #1x9.75", #2x1.76", #2x4.00", #2x8.00", #2x11.88" SureGrip Phillips Screwdrivers; T15x5.89", T20x5.89" SureGrip TORX Screwdrivers; 3/16"x10.00" SureGrip Cabinet Screwdriver; #000, #00, #0 Phillips Micro Screwdrivers; 2mm, 2.5mm, 3mm Slotted Micro Screwdrivers; 7" SureGrip 18 degree Bent Tip Pry Bar. Packaged in plastic tray. Precision ground and vapor blasted...

OTC3421-77 - OTC Genisys USA European Cable Update Kit — $203.99
These cables are for Genisys owners who already have European 2003 cables and want to update cables to 2005. Kit includes Mercedes 38-pin SSI and BMW cable. Note: Smart Cable 3421-88 is required for newer BMW application coverage.

KD 81206 - K-D Tools 3 Piece, GearWrench Full Polish Ratchet Set — $73.99
3 Piece, Full Polish Ratchet Set (1/4", 3/8" and 1/2" Drive) Full Polished Ratchet features low profile head which allows for greater comfort and access Ratchet features flush mounted reversing lever for greater access 60 Tooth Gear System allows for greater access Backed by a Lifetime Warranty

IR 308A - Ingersoll-Rand Heavy Duty Air Die Grinder 1/4" Collet — $82.99
A durable yet economical choice offering longer life and higher free speed at 25,000 rpm. A general purpose tool designed forr porting, light weld grinding, and breaking sharp edges. Ball bearing construction for longer life tool. Comes with two collet wrenches. Self-locking throttle lever. Positive grip 1/4" capacity collet chuck. Specifications: Free Speed: 20,000 rpm. Weight: 1.16 lb. (.53 kg.) Length: 5.63" (143 mm) Average Air Consumption: 3 cfm, 20 cfm @ load. Sound (pressure/power)95.1/10...

WAE46568 - Waekon EVAP System Master Diagnostic Kit — $574.99
Complete EVAP System Leak Diagnosis in Minutes! VERIFY the Leak, PINPOINT the Leak, VERIFY the Repair. No long waiting time for OBDII EVAP monitors to reset. No comebacks. One of the most common reasons for a vehicle s OBDII system to set a Diagnostic Trouble Code (DTC) is an EVAP system leak. Without the proper equipment, troubleshooting the DTC can become difficult and time consuming. Priced under $600.00, the Model 46568 EVAP System Master Diagnostic Kit is the most comprehensive and cost effective...

Meguiars M0916 REMOVER SWIRL — $11.99
A cleaner and a polish in one bottle. If, much to your dismay, you notice swirl marks, tiny scratches or other mild defects, you'll appreciate our ultra-safe Swirl Remover. This amazing product will carefully eliminate those annoying problems-whether applied by hand, or using a machine buffer/polisher. While Swirl Remover is gently cleaning, it's also polishing, leaving a dramatic, high-gloss shine. It's even formulated to reduce splatter and make application and wipe-down easier. For use by hand...

OTC8031 - OTC Jeep and Truck Ball Joint Remover/Installer Set — $274.99
A complete set of adapters and special large C-frame to remove and install ball joints on most Chrysler/Dodge light-duty trucks, 1999 - 2004 and Jeep Cherokee, Grand Cherokee, Wrangler, and Liberty vehicles, 1997 - 2004. The high clearance, specially designed and produced OTC large C-frame allows for the repair of the most recent vehicles. Large C-frame, 19 adapters, and replaceable forcing screw tip to allow the use of the adapters in the 6530 kit to be used for other applications. Kit comes...

OTC 6497 SUPER DUTY PITMAN ARM PULLER — $87.99
Pitman arm can be removed while steering gear is on vehicle. 3-1/4" spread handles the large pitman arms. Robust desgn for durability and strength. 2 clamp bolts lock the jaws for secure grip. Works on 2005-current Ford Super Duty trucks.

SK 19732 - SK Hand Tool 6 Piece 1/4'' Drive Metric Hex Bit Socket Set — $43.99
Bit sockets feature SK's high polish SuperKrome finish, which provides for long life and maximum corrosion resistance. Bits are manufactured to rigid standards using high strength S2 steel. Set is made in the U.S.A. Lifetime warranty Packaged on a plastic rail Sizes: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm

Sunex 2301 SOCKET IMPACT ADAPTER 1/2IN. FEMALE 3/8IN. MALE — $9.99
Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability

Chicago Pneumatic 3/8" Heavy Duty Air Ratchet - CP 828 — $79.99
3.75 CFM average air consumption, 15 CFM actual consumption at load. 1/4" NPTF air inlet. 3/8" min. hose size.

Channellock GL6 PLIERS TONGUE & GROOVE 6-1/2IN. UTILITY — $11.99
Ergonomically designed offset head for greater leverage. Special jaw design accommodates many shapes. PermaLock Fastener eliminates nut and bolt failure. Has 5 adjustments. CHANNELLOCK BLUE comfort grips.

MIT 4 PC Mini Pick and Hook Set — $6.99
Ideal for use on Cotter Pins, O-rings, Springs, and Washers in Automotive, Household and Hobby Applications

OTC 7830A POWER STEERING PUMP PULLEY KIT — $166.99
Fits 1 1/8", 1 1/4", 1 5/16", and 1 3/8" pulley hub diameters including 1988 and newer GM cars equipped with Quad 4 engines; 1991 and newer GM minivans with 3.1 L and 3800 V-6 engines; 1991 to current Ford 4.6L engines with a metric shaft.

KAS5344 - Kastar Hand Tools 3-Pc. Universal Ratcheting Serpentine Belt Wrench Set — $74.99
The Serpentine Belt Wrenches are designed to release the tension on spring-loaded idler pulleys. This wrench allows direct access to the tensioner without having to remove engine accessories or frame components. Ratcheting wheels allow quick and easy positioning of the wrench driving end to allow the user to access the tensioner from any angle. Heat treated and nickel chrome plated for durability, appearance and long tool life. Slim head design allows access to tight areas found in the tensioner...

OTC1503A - OTC 2-1/2-Ton Stinger Service Jack — $83.99
The Stinger Series hydraulic service jack is designed for the budget-minded shop owner who still wants the quality of an OTC product. Built from select steel, this jack can stand up to the abuse that jacks are subjected to daily. Yet, its light compact design makes it easy and convenient to use. Jack has a built-in safety overload system that prevents use beyond its rated capacity. With rear swivel casters, maneuvering and positioning this jack is an easy task. Lifting range of 5" to 20".

Astro Pneumatic 7866 UPPER CONTROL ARM BUSHING SERVICE SET — $87.99
No need to remove control arm from vehicle, with this kit you have all the necessary adapters for quick bushing removal and installation. The set includes C-frame, screw assembly, adapters and inserts.

Milwaukee Electric Tools 48-00-5183 SAW BLADE SAWZALL BI METAL 18TPI 4IN. 5/PK — $9.99
Super Sawzall blades are made with Matrix II high speed steel teeth containing 8 percent Cobalt to keep a sharper tooth edge longer. The tough Bi-Metal design allows faster cutting, longer life blades that can bend without shattering. Milwaukee designs and manufactures Sawzall blades for the toughest professional applications. Materials, tooth configuration and heat treating are designed to maximize performance in specific cutting applications. Durable, long life blades are the goal of every blade...

LIS59400 - Lisle Pinion Bearing Race Driver Set — $96.99
Set Includes 8 Drivers for Driving Inner and Outer Pinion Bearing Races on 1/2 and 3/4 Ton Ford, Dodge and GM Pickups. Use the extended, two-piece handle for driving rear pinion bearing races. A pneumatic handle is also included for use with an air hammer. Set Includes: 59410 (2 11/16"), 59420 (2 27/32"), 59430 (2 7/8"), 59440 (3"), 59450 (3 1/4"), 59460 (3 1/2"), 59470 (3 3/4"), and 59480 (4 1/2")

LNC1107CLR - Lincoln Lubrication Clear Grease Gun Tube for LNC1134 and Competitive Models — $34.99
The clear design enables positive grease type identification (bulk or cartridge) Visual confirmation of quantity of grease remaining in tube (bulk) Visual confirmation of air pockets eliminating the loss of prime (bulk) Visual confirmation of grease separation or contamination (bulk) Perfect concentricity and resilience eliminates bypass (bulk or cartridge) Visual recognition of grease brand promotes quality of shop (cartridge)

OTC4020 - OTC Air/Hydraulic Foot Pump — $373.99
With shop air as the energy source, this pump has the power and oil capacity (80 cu. in. usable oil) to drive even the large 55-ton rams. It is an ideal all-around power source for dozens of body, frame, and alignment applications. It can be used with a variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI. An internal relief valve protects the hydraulic components regardless of hydraulic pressure. In addition, a two-stage release mechanism gives fast or metered ram return...

OTC3235 - OTC Ford EEC-V 104-Pin Breakout Box — $572.99
Unit accesses all connections to the Ford Power Train Control Module (PCM) on all 1994 and newer EEC-V systems. The adapter cable interfaces with the PCM connector and the vehicles harness connector. Bannana jacks located on the units panel are used to access each PCM connection. Flexible, eight foot ribbon cable provides added freedom of movement Includes plastic overlay panel and connecting cable for numeric identification of each jack to mathc the vehicles PCM pin-out. Unit built to withstand...

Vise Grip 25 9R Locking Welding Clamp — $20.99
For use in welding applications or holding awkward shapes in place. Jaw Capacity: 2-3/4" (70 mm) Throat Depth: 1-5/8" (41 mm) Jaw Depth: 2-3/4" (70 mm) Size: 9" (225 mm)

SK 7 PC SuperKrome Flex Fractional Combination Wrench Set - SK 86132 — $108.99
Handle edges are rounded for improved gripping and increased user comfort. Pivoting socket ends of the wrenches allow for greater maneuverability in cramped, closed spaces. Set Contents: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" Wrenches. Packaged in a tray. Includes Lifetime Warranty.

SK 84232 - SK Hand Tool 12 Pc. TORX Plus Bit Socket Set — $83.99
TORX Plus bit sockets are designed for use on a new fastener found on today's vehicles in interior, trim and dashboard applications. S2 Steel Bits SuperKrome Bit Holder Made in USA Lifetime Warranty Packaged on a rail. Sizes: 1/4" Drive - T8, T10, T15, T20, T25, T27, T30; 3/8" Drive - T40, T45, T50, T55; 1/2" Drive - T60

OTC1580 - OTC 1,500 Lb. Capacity Easy Roller — $107.99
The Stinger No. 1580 Easy Roller provides a technician with a simple and efficient method of moving a disabled vehicle around a shop environment. Just position an Easy Roller at each wheel of a vehicle weighing up to 6,000 lbs., and use the foot pedals to activate the hydraulic lift mechanisms. Within minutes, one individual can easily move the car throughout the garage. The Easy Roller fits tread widths up to 12", and the four heavy-duty casters can support up to 1,500 lbs. per unit while, at the...

Streamlight 75563 STINGER HP CAMO AC/DC CHARGER — $108.99
Delivers 40,000 candlepower light, almost three times the candlepower of the original Stinger. Continuous run time of one hour. 3.6 Volt, 1.8 amp hour, sub-C rechargeable up to 1,000 times. Real Treeâ„¢ Camo. 12.2 oz.

S K Hand Tools 87856 SOCKET IMPACT 1-3/4 3/4IN. DRIVE DEEP 6 POINT — $24.99
Corrosive resistant and laser engraved every 120 degrees. Nose down design for greater access. SureGrip® hex design drives the side of the fastener, not the corner. Made in the U.S.A. Lifetime warranty.

RBL Products 103 43" X 115" AUTOMASK ROLL-ON DISPENSER (12CS) — $26.99
Paint overspray sticks to film. Strong, static-free. Ultimate solvent bleed-through resistance. Even paint stripper can't penetrate it. Compactibility - wads up into small, space-saving, throw-away balls. Cuts disposal space up to 70%. Resists heat up to 230 F (110 C).

OTC 1923 BEARING LOCKNUT SOCKET 2-3/4IN. 3/4IN. DR 6 POINT — $23.99
This socket has a 3/4" square drive opening, permitting the use of an extension and torque wrench to tighten the locknut as required. Locknut removal and installation is simple, even when wide-rim wheels are involved, since a long extension may be attached to the socket to provide the necessary clearance.

CP 715K - Chicago Pneumatic Heavy Duty Zip Gun Hammer with 4 Chisels — $61.99
Most powerful hammer in its class Longer piston strokes for more force per blow Integral muffler minimizes exhaust sound Applications: rivet and bolt cutting, bushing driving and overall front end work 2100 blows per minute Includes 4 commonly needed chisels Specifications: Shank Opening (In.): .401 Weight (Lb.): 4-1/2 Piston Stroke (In.): 3-1/2 Average Air Consumption CFM: 4-1/2 Air Inlet NPTF (In.): 1/4 Blows Per min @ 90 PSI: 2100

WILMAR W80275 T-HANDLE HEX KEY SET METRIC 10PC — $13.99
High quality carbon steel shafts. Black oxide finish resists corrosion. PVC T - Handles for added torque and comfort. Handy storage rack. Metric Set Includes sizes: 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 8 and 10mm.

OTC 7072A CLUTCH ALIGNING TOOL 1-1/2IN. OD 1IN. PILOT — $47.99
The tool is designed to provide a perfect fit to the spline of the clutch disc.

LIS29650 - Lisle Antenna Nut Socket Set — $36.99
For Removing or Replacing Antennas Four double-ended sockets fit eight common domestic and import antenna nuts. The smaller three sockets are 7/8" hex and the larger socket is 1 1/4" hex. Sockets are made of heat-treated alloy steel for strength. Complete applications are listed on the card. Includes: Antenna Nut Socket #1, Antenna Nut Socket #2, Antenna Nut Socket #3 and Antenna Nut Socket #4.

IR 7802RAKC - Ingersoll-Rand 3/8" Heavy Duty Air Reversible Drill / Keyless Chuck — $156.99
Keyless Chuck for fast and easy bit changes. Use this economical, high quality 3/8" drill for all your general purpose drilling, honing, reaming, and hole sawing. With its reversible 1/2 hp motor, you can also drive and remove screws, including backing out tight screws without a struggle. Reversible motor with a quick reverse lever. Variable speed throttle for starting holes easily. Handles smoothly, a lightweight, compact drill. Specifications: Free Speed: 2,000 rpm Chuck Size: 3/8" (10 mm) Rated...

Brush Research BC18MM HONE BRAKE CYLINDER FLEX 18MM 180 GRIT — $13.99
A resilient, flexible, honing tool with a soft cutting action. The abrasive (points) globules each have independent suspension that assures the Flex-Hone to be self-centering, self-centering to the bore, and self-compensating for wear. Specifically, it is a low-temperature abrading process that exposes the undisturbed base metal structure to produce a longwearing surface. It is a method of developing a surface on a metal part which is optically smooth and metallurgically free of any fragmented, amorphous...

OTC 6974 FORD DIESEL FAN CLUTCH WRENCH — $85.99
Applications: 2003 - newer Ford F-550 and F-650 super-duty trucks with 6.0L diesel engine

MLW2691-22 - Milwaukee Electric Tool M18 18V 2 Tool Compact Combo Kit — $342.99
M18 1/2" compact drill/driver delivers 400 in.-lbs of torque and is only 4 lbs. and 7 " long M18 1/4" hex compact impact with the Milwaukee 4-pole frameless motor delivers 1400 in.-lbs of torque Includes: (2) 18V Lithium-Ion Compact Battery Packs 18V Charger Carrying Case

TIG10803 - Tiger Heavy Duty Tools Yoke Puller Kit for Heavy Duty Trucks — $443.99
The Tiger Yoke Puller simplifies and expedites the removal of heavy-duty yokes on driveshafts, transmissions and rear-end differentials without damage to yokes or other components. Enginereed for use with a 1/2" imact wrench. Fits full and half round yokes on Spicer and Meritor 1610, 1710, 1760, 1810 series, Spicer SPL 140, 170, 250 series and Meritor (Rockwell) RPL 20 and 25 series. CNC machined from billet chrome-moly steel. Heat treated and finished to provide maximum strength and wear resistance...

EZRMS4000 - EZ-Red Super Computer Memory Saver — $64.99
Saves all drivability codes and settings when disconnecting a vehicle s power (battery.) Direct wired OBD2 Connector 12 volt ,4.5 amp hour sealed lead acid battery included inside unit Power on / power off switch LED indicates connection to circuit Protected by a 4 amp circuit breaker Includes 120V AC charger Also protects settings and codes for anti-theft radios, clocks, keyless entry systems, alarms , cellular phone settings and other memory related functions

CP 871 - Chicago Pneumatic High Speed Tire Buffer — $61.99
Adjustable speed regulator for precise control Jacob s chuck for holding buffing accessories Lock off throttle to prevent accidental start ups Rear exhaust directs air away from the work area Ideal for patchwork, roughing areas for recapping and cleaning tire moldings Max rpm: 22,000

OTC 7180 BEARING CUP INSTALLER ADJUSTABLE UNIVERSAL — $259.99
This handy, adjustable tool is designed to install wheel-bearing cups in a wide range of heavy-duty axles. Simply adjust and lock the jaws to the cup I.D., slip on the new cup, set it in the bore, and drive it in with a hammer. The tool helps eliminate the damage caused by makeshift methods.

E-Z Red MR30 MONSTER MIRROR — $22.99
This is the biggest, most super duty inspection mirror on the market. E-Z to use, E-Z to store. Extends to 30 inches. 4” x 4” Shatter proof acrylic mirror. Pivots to virtually any position. Insulated handle. Full metal construction. Made in the USA. Weight: 5.1 oz.

Waekon Industries CSA61868 COOLING SYSTEM TEST & REFILL GRAND MASTER — $465.99
Pressure test regulator. Vacuum refill attachment. Twist lock ìAî size and small neck radiator master adapter. Blow-molded storage cases. User guide and adapter look-up table. 9 machined aluminum adapters. Popular threaded reservoir adapter with removable spindle.

Lisle 33820 STABILIZER LINK KIT — $24.99
Tool required before any service work can be done to the strut. Fits many popular applications. Removes top steering stabilizer link. Speeds strut replacement time. Handy set includes all required tools for stabilizer removal.

KD Tools 2289 PITMAN ARM PULLER — $22.99
Removing the pitman arm, KD Tools has made a simple way! With this pitman arm puller simply mount jaws over pitman arm and turn center screw with wrench until tight. Strike the center screw with hammer to release pitman arm. No other tools are needed! It's made to be hassle free!

OTC6525 - OTC LeakMaster Evaporative Emissions System Tester — $1,430.99
Developed specifically to diagnose vehicle EVAP system for leaks. Can also be used to diagnose and locate vacuum leaks, exhaust leaks, under dash vacuum leaks, crankcase oil leaks, and wind and water leaks. Shipped with full charge of smoke producing UV solution that can be refilled by the customer. Accessories to test EVAP systems on many import & domestic vehicles included.

Sunex International 9940 5 Piece SAE S-Style Wrench Set — $24.99
Curved design for maximum access in confined areas Canvas pouch included Fully polished drop forged alloy steel Includes 5/16"x3/8", 7/16"x1/2", 9/16"x19/32", 5/8"x11/16", 11/16"x3/4" Lifetime warranty

OTC 4504 Stinger Bubble (I.S.O.) Flaring Tool Kit — $23.99
Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems. Includes four dies: 4.75, 6, 8, and 10mm adapters. Forged steel yoke, flaring bar, and all the adapters needed for ISO bubble flaring. The most economical "Bubble" flare tool to date. Housed in a blow-molded storage.

KD Tools 126 CIRCUIT TESTER HIGH/LOW VOLTAGE 6V & 12V — $10.99
Check 6 and 12V circuits for voltage and spark plugs for spark. To use, ground the clip and touch the probe to the point being tested. The tester bulb will light it voltage is present. To use as a spark tester, screw the probe into the opposite end of the handle. Replacement part: 126-75 GE 1449 Bulb. Replacement pan: 126-78 Neon Bulb.

STE6600 - Steelman ChassisEar Squeak and Rattle Finder - Multi Mic Stethoscope — $129.99
6 mics with alligator clips listen to 6 locations in one road test Hear noises that can not be duplicated in the stall Essential for saving needless warranty expense Improves shop efficiency, revenues, and saves time While testing select each of the 6 mic individually to pinpoint noise location

OTC7314A - OTC Pitman Arm Puller — $33.99
The No. 7314 Pitman arm puller is designed to handle the toughtest Pitman arm pulling jobs on passenger cars and light trucks. This puller features special forged jaws shaped to fit the job, ensuring a positive grip and leaving your hands free for the pulling job. To use, simply remove the retaining nut, place the puller jaws behind the Pitman arm and tighten the forcing screw. Mechanical power does the rest!

S K Hand Tools 47158 SOCKET 1-13/16 3/4IN. DRIVE STD 12 POINT — $21.99
SuperKrome® finish provides long life and maximum corrosion resistance

OTC 1910 BEARING LOCKNUT SOCKET 3-1/2IN. 3/4IN. DR 6 POINT — $20.99
This socket has a 3/4" square drive opening, permitting the use of an extension and torque wrench to tighten the locknut as required. Locknut removal and installation is simple, even when wide-rim wheels are involved, since a long extension may be attached to the socket to provide the necessary clearance.

S K Hand Tools 42317 CROWFOOT FLARE NUT 17MM 3/8IN. DRIVE — $11.99
SuperKrome® finish provides long life and maximum corrosion resistance. SureGrip® hex design drives the side of the fastener, not the corner. Flare nut crowfoot wrenches are designed for use on soft fittings such as brass and aluminum. Made in the U.S.A. Lifetime warranty.

SUNSX264K - Sunex International 1/4" Mini Right Angle Air Die Grinder Kit — $59.99
20,000 RPM Safety throttle lever Ball bearing construction for long tool life Includes: SUN SX264 Die Grinder; 2 spanner wrenches, 1/8" (3mm) collet; 5 pc. 1/8" (3mm) shank grinding stones, 5 pc. 1/4" (6mm) shank grinding stones; 1 each, 2" & 3" roll lock backing pad; 4 each 2" & 3" roll lock surface prep discs; Blow mold case.

S.A.S. Safety Corp. 6504 Value Touch Latex Gloves - X-Large — $9.99
Disposable 100 gloves per box Medical exam grade Latex Excellent fell and gripping power Lightly powdered Excellent for Automotive technicians, furniture refinishing, home repair, dental professionals, painters, hair stylists(dyeing), janitorial duties, general household use.

SK 86014 - SK Hand Tool 16 Piece SuperKrome Fractional Combination Wrench Set — $236.99
16 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools from the harsh working environments found in today's workplace, while providing long life and maximum corrosion resistance. The patented SureGrip wrenching design on wrench box ends, drives the side of the hex of the fastener, not the corner, to increase torque and avoid edge breakage, especially on rusted or damaged fasteners. Box ends are also countersunk to help lead the wrench over fastener...

Hanson 11135 EXTRACTOR/DRILL BIT SET 35 PC — $135.99
With this new set of Hanson screw extractors and drill bits, you will have the full range of screw extractors, both spiral and multi-spline, that you need to remove the toughest bolts and screws from 3/32" to 15/16" (including metric sizes). The left hand cobalt drill bits are designed to drill into tough screws and bolts counterclockwise which often helps to loosen the bolt while it drills.

Astro Pneumatic 600PT PUNCH / FLANGE AIR 1/4IN. PISTOL GRIP — $57.99
Blade designed for easy replacement. Ball bearing construction with a forward exhaust system. Dual function tool performs hole punching and panel crimping. Features a rotating head for convenient use. Every pull of the lever delivers a single punch or a single flange crimp with precision control. Forms an offset crimped edge on sheet metals for no-bump lap welds. Lightweight, yet ruggedly built. Cuts metal fabrication time in half.

OTC 8033 CHRYSLER BALL JOINT SOCKET SMALL — $57.99
Removes and installs the screw-in type ball joints used on mid-size, rear-wheel drive Chrysler cars.

K Tool International 73601 WRENCH FILTER 2-7/8IN. TO 3-1/4IN. SWIVEL HANDLED — $8.99
K Tool International 73601 WRENCH FILTER 2-7/8IN. TO 3-1/4IN. SWIVEL HANDLED

MAY29895 - Mayhew Tools Stud Extractor for 3/8in Impact Wrench — $54.99
Features & Benefits: Fits a 3/8" impact wrench. Will remove: Threaded, stripped, rusted, broken and smooth studs. Fits studs from 1/4" to 1/2" (6-12mm). Improved Quality & Better Value.

Porter Ferguson SM0034 SPEED-MIDGET 4-TON RAM — $141.99
100% Made in USA. 4-3/4" piston travel. From 9" retracted height to 13-3/4" extended height. Designed to work with Speed-Midget attachments on both ends. 1-1/2 - 12 UN body thread gives you even more versatility to use even more attachments. Standard 1/4-18 NPTF port allows you to replace the ram half coupling to make it compatible with your equipment.

Fluke AC285 SureGrip Aligator Clips — $20.99
Multi-purpose tooth pattern grips anything from fine gauge wire to a 3/4" bolt Nickel-plated steel jaws 1000V CAT III, 600V CAT IV, 10A

WAE47001 - Waekon Domestic/Asian Adapter Kit for EGR Tester — $111.99
This kit expands the capability of the Waekon 47062 EGR tester. Kit includes: 7 adapters for testing Ford, Chrysler, Asian, and other non-linear/digital GM EGR systems

RAYMT4U - Raytek MiniTemp No-Contact Thermometer with Laser Sighting — $44.99
Affordable infrared no-contact thermometer Backlit display Selectable Celcius or Farenheit Laser: single point Specifications: Temp range: 0 to 500 degrees Fahrenheit (-18 to 260 degrees Celsius) Emmisivity: Pre-set to 0.95 Distance to spot ratio: 6:1

ALR5000A30GF - Alert 30' Reel Extension Cord with 3 Outlets — $35.99
Powder coated metal retractable cord reel housing. 3 grounded outlets. Specifications: Cord Type, Gauge, Length: SJT, 16/3, 30 ft. Max. Rating: 1250 Watt, 10A, 125V No Circuit Breaker No. of Outlets: 3 Master Pack: 4 Master Cubic Feet: 1.6 Cu. Ft. Master Weight: 34.3 Lbs.