batteryspace.com

CR2016 button cells cases (20d x 1.6 mm) for Battery Research ( 1 pair with seal O-ring) — $1.19
CR2016 button cells cases (20d x 1.6 mm) for Battery Research ( 1 pair with seal O-ring)

Sealed Lead Acid Battery 12V 12AH (144 Wh) for UPS, Seascooter / E-bike (S) — $39.98
Emergency light: Portalac Part # PE-10-12R, Portalac Part # PE-12V10B, Teledyne Big Beam Part # S-1210, Teledyne Big Beam Part # 118-0010, Yuasa Part # NP-12-12

RCR123A 3.0V 680mAh (2.04Wh) Rechargeble Li-ion Battery (1 PC) — $2.95
Rechargeable 3.0V CR123A Li-Ion Battery with 680mAh capacity, so called 3.0V RCR123A Li-Ion battery. RCR123A can be recharged up to 1000 times. One piece RCR123A Li-Ion = 500 pcs Primary CR123A and save you a fortune. It is perfect for most of camera, and compact flash lights. Voltage: 3.2V ( working ) and 3.9V ( peak). Capacity: 700 mAh at peak 680 mAh on average. Max. Discharging rate: < 1.5A. Cell's dimension: 16.4 Dia. x 34.3 H mm. Weight: 17 g or 0.6 Oz. The RCR123A Li-Ion cell is protected...

Sealed Lead Acid Battery 6V 12AH (S) — $24.95
Fit with Lithonia ELB-0609, Lithonia ELB-0612 or ELB-0612A, Lithonia ELB-0614, Dual-Lite 12-273 emergency lights

PCB for 11.1V Li-Ion Battery Pack with Fuel Gauge Socket (3S@10A limit ) — $6.95
Ideal for HID light application!. 3 cells Li-ion /Li-polymer battery pack protection. Utilize Seiko S-8254 protection IC. Utilize AO4419 MOSFET. Fuel gauge socket built in. Dimension: L50*W16*T4.0mm (L1.96"xW0.6"x0.16"). Weight: 0.2 Oz (5.7grams).

Telxon - PTC-960L Series Barcode Scanner Battery, 7.2V 1100mAh, NiMH — $16.95
NiCd battery pack , 7.2V, 1100mAh. Reliable service life. Compatible with origibal Telxon scanner as the follows:. Original Part No:20198-201. Telxon Barcode Scanner / Mobile computer series: PTC-960L , PTC-960CL , PTC-960C.

SYMBOL - PDT3100 Series Barcode Scanner Battery, 6V 600mAh, NiMH cells (PVC) — $34.95
SYMBOL - PDT3100 Series Barcode Scanner Battery, 6V 600mAh, NiMH cells (PVC)

Li-Ion Battery Pack 14.8V 9.6 Ah ( 142Wh -Round) for Dive Light (LCH3P4S4Z3I3WR) — $219.95
Li-Ion battery may be exploded if mis-using. We are not responsible for any damages or losses caused by misusing (included but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling batterypacks...) .

Sealed Lead Acid Battery 4V 4.5AH (S) — $15.95
Smart tip To recharge 4V 4.5 Ah SLA battery, use either 7.25v 500mA DC adaptor or 7.5V 1000mA DC adaptor with 2 pins Female Universal Connector to Clips connector . The charging time is about 5 hours ( this is not smart charger, you must cut-off power by timer )

Component - Connector: 8 Detachable Laptop Connectors for the most of laptop computers — $3.95
Warning : please check and match the polarity of our connector to your device. We are NOT liable for any damage to your device due to reverse polarity

Primary Lithium thionyl chloride Battery: DD Size 3.6V 36 Ah (ER341270, non-rechargeable, 129.6Wh) — $29.90
Nominal capacity : 36 Ah ( 38,000 mAh) ---- the highest energy density cell in the market. Open circuit voltage 3.66V. Nominal voltage 3.6V at 10 mA 20 oC. Pulse current: Typically up to 400 mA. Max. Continuous drain current: 200mA Max ( Please don't discharge the battery at a higher current). Pulse current: 400mA. Storage (recommended) +30 oC (+86 F) max. Operating temperature range -55 oC - +85oC. lithium-thionyl chloride(Li-SOCl2) technology. Diameter (max): 34.2mm(1.4 in). Height (max...

High Power Polymer Li-Ion Battery: 14.8v 10 Ah (148 Wh) with PCM at 30 Amp Rate — $236.95
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

Customize Polymer Li-Ion Battery: 14.8v 10 Ah (148 Wh, 7A rate) with PCM, UN Approved — $189.95
Must read here before place an order. Please download fill the form and fax back to 510-439-2808. Attn: BatteySpace-Tech. We reserve the right to not sell the battery to any one if we feel they cannot handle Li-Ion battery safely

PCM with Equilibrium Function for 25.9V Battery Pack at 25A limit — $45.55
This protection circuit is specially designed for 25.9V Li-Ion / polymer Li-Ion Battery pack with 25 A discharging rate. Different with normal PCB, it provides equilibrium function during charging, e.g. PCM will detect each cell's voltage and trim higher voltage until other cell's voltage reach same, therefore allow Li-ion cell has longer service life. Also t he PCM will provide the following protections:

High Power Polymer Li-Ion Battery: 14.8v 10 Ah (148 Wh, 30A rate) with PCM & Fuel Guage display — $239.95
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

Polymer Li-Ion Battery Module: 37V 10Ah ( 370 Wh) 14A Drain Rate + A Fire Retardant Bag — $414.99
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

High Power Polymer Li-Ion Battery: 29.6v 10 Ah (296 Wh, 30A rate) with PCM + A Fire Retardant Bag — $454.99
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

Polymer Li-Ion Box Battery: 37V 10Ah ( 370Wh, 9A rate) in Plastic Enclosure (End Plug) — $422.95
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

High Power Polymer Li-Ion Box Battery: 37V 10Ah ( 370 Wh, 40A rate, Ebike Terminal) in Aluminium Enclosure with fuel gauge + A Fire Retardant Bag — $479.95
High Power Polymer Li-Ion Box Battery: 37V 10Ah in Plastic Enclosure (370Wh, Side Plug) 40A Rate + 3.0A Smart charger+Bag - Hi-Power Polymer Li-Ion Battery Box: 37V 10Ah ( 370 Wh, Side Plug) in Plastic Enclosure 40 A Drain Rate + 3.0A Smart charger + Digital Camera Bag (30)

High Power Polymer Li-Ion Battery: 37V 10Ah ( 370 Wh) 70A Drain Rate + A Fire Retardant Bag — $699.95
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

Polymer Li-ion Box Battery: 29.6V 10Ah (296Wh, 9A rate) in Plastic Enclosure (End Plug) with Fuel gauge — $445.50
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

Polymer Li-ion Battery Pack: 11.1v 10 Ah (111 Wh, 7A rate) with Trail-Tech Female plug — $157.75
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

Polymer Li-Ion Battery: 25.9v 10Ah (259 Wh) 7A rate with PCM & Fuel guage + A Fire Retardant Bag — $329.95
Customize Polymer Li-Ion Box Battery with thermistor: 25.9V 12.6Ah (326.34 Wh. 18A rate) in Aluminium Enclosure + A Fire Retardant Bag - Customize Polymer Li-Ion Box Battery with thermistor: 25.9V 12.6Ah (326.34 Wh. 18A rate) in Aluminium Enclosure + A Fire Retardant Bag (26.46)

Polymer Li-Ion Battery Module: 25.9v 10Ah (259 Wh) 7A rate with PCM + A Fire Retardant Bag — $325.95
Overcharge (> 29.6 V). Overdischarge ( < 16.1V). Over drain ( > 10 Amp). Short circuits. Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

Electric Blanket (55"x39") with 14.8V 20Ah ( 296 Wh) Li-Ion Battery Pack / Smart Charger — $369.95
Automatic thermal control warm up to 115oF (46.11oC). Lightweight, durable and low current draw. (5A @ 60 w). Dual thermostat and thermal fuse for safety protection. 7.5' DC power cord and fused cigarette lighter plug. With large size: 55"x39".

Polymer Li-Ion Battery Module: 14.8v 8 Ah (118 Wh) with PCM at 7 Amp Rate — $189.95
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

Polymer Li-Ion battery Module, 3.7 V 2200mAh ( 8.1Wh, 4.2A rate) - Prewired with PCB(PL-545172) — $23.99
Overcharge ( >4.2V). Overdischarge ( <2.5 V). Over drain ( >8.5 Amp). Short circuits.

Battery Holder for 9 Volt Cell with 6" 26AWG Wire Leads - RoHS Compliant — $0.89
9 Volt Holder with 6" 26AWG Wire Leads (Red = Positive, Black = Negative)

Battery Holder: 1xD Cell With 6" 24AWG Wire Leads - RoHS Compliant — $0.99
1 "D" Battery Holder With 6" 24AWG Wire Leads ( Red = Positive, Black = Negative) Wire Leads

High Power Polymer Battery: 11.1V 3000 mAh (33.3 Wh, HPL-7535130-2WR) with Standard Male Tamiya Plug for Airsoft Gun — $66.50
Warning: The battery pack has 12.6V peak voltage, which provide much faster shooting than 8.4V-12V NiMH pack. Please don't held trigger continuously since the pack may damage your gear in side airsoft gun

Polymer Li-Ion Battery: 14.8V 5Ah (2Rx2C end to end, 74Wh, 7A rate) — $118.95
Can replace almost every bike lighting system on the market, such as Nite-Rider, Light & Motion, Turbo Cat, Night Sun, Marwi, BLT, Vista, Cygolite, Nite Hawk, or Performance View Point at better quality and much lower price.

Battery Holder: 2xD Cell With 6" 24AWG Wire Leads (Side by side) - RoHS Compliant — $1.79
2 "D" Battery Holder With 24AWG Wire Leads ( Red = Positive, Black = Negative) Wire Leads

NiMH Battery Pack: 16.8V 10 Ah (168Wh 14xD) for Diving Light / Scooter / Robot / E-bike — $155.95
Especially for Dahon Roo El e-bike that will fit perfectly in its battery compartment and provide 1.25X longer riding range than original battery pack

High Power Polymer Li-Ion Cell: 3.7V 3000 mAh (7035130-10C) 11.1Wh, 30A drain rate — $19.95
For High power Li-Ion battery, you may not use PCB in discharging terminal, however you must cut-off power before battery voltage drop to 2.5V /cell

Battery holder: 3 x AA (Side by Side) Battery Holder With 6" 26AWG Wire Leads - RoHS Compliant — $0.75
Battery holder: AA x 4 with USB interface connector and Belt clip ("Out" / "IN" / "OFF" power switch) - RoHS Compliant - Battery holder: AA x 4 with USB interface connector and Belt clip ("Out" / "IN" / "OFF" power switch)

Water Bottle Li-Ion 18650 Battery: 11.1V 9.6 Ah (107 Wh) for HID / Halogen Bikelight (Trail-Tech female plug) — $199.95
Please keep your old bike lighting connector. You may need to link our wire to a special connector to make your lighting work properly , in case our universal connectors can not fit your light.

Primary Lithium Battery: 1PCS CR123A (3.0V 1300mAh, 3.9Wh) - UL / UN Approved — $0.99
The equivalent or direct replacement for the CR123, DL123A, K123A, EL123AP, VL123A, 5018LC and CR17345. Superior shelf life minimal discharge. Used in a many cameras. Excellent shelf life of 10 years. Only 0.5 percent capacity loss per year at room temperature. High energy density. Lasts four times longer than ordinary alkaline batteries in high-drain devices like digital cameras. In flash units, they power three times more flashes with a consistent quick recycle time. Capacity: 1300mAh....

Polymer Li-Ion Battery Module: 14.8V 9Ah (133 Wh, 7A rate) Prewired with PCM — $179.95
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

Smart Charger (1.0A) for 29.6V Li-ion/Polymer Rechargeable Battery Pack — $49.95
Intelligent charger (manufacture part# H03360010-US-2) designed for all types of 29.6 V (8 cells) Li-Ion Battery packs including Polymer Li-Ion and Cylinder Li-Ion. Worldwide input AC power from 110V --- 240V. 1000 mA (1.0A ) constant charging current for faster charging, save your much more time. Charging time for 4000mAh battery pack is about 5 Hrs. ( Please don't use it to charge Li-Ion battery with capacity < 1500mAh). Built in IC to cut off power automatically when battery is fully charge...

Smart Charger (1.8A) for 3.7V Li-ion/Polymer Rechargeable Battery Pack--UL listed — $16.95
Dimension (LxWxH): 81mm(3.1") x 52mm(2.0") x 30mm(1.2"). Weight: 5.2Oz (150grams). Battery: 3.7V Li-Ion/Polymer Battery with capacity >=2200mAh. Protection: Output shorted and overload protection. LED Indicator: Red - Charging Green - Fully charged. Efficiency: >70 %. Operate Temperature: -10oC(14o F) ~ +40oC(104o F). Humidity: <+90. Charge time = (Ah rate of the pack x 1.5) / 1.8A charge current 1000 mAh = 1 Ah.

Polymer Li-Ion Battery Module: 14.8v 40Ah (592Wh, 30A rate) with PCM — $854.50
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

CH-V3028 Compact NiMH Battery Charger + 4 AA SANYO + 4 AAA SANYO NiMH Rechargeable Batteires — $32.55
Unplug and then replug the charger each time when you recharge the empty batteries. Unplug the charger is needed because it will reset the timer.

Battery Holder 2 x C With 6" 24AWG Wire Leads - RoHS Compliant — $1.19
2 "C" Battery Holder With 6" 24AWG Wire Leads ( Red = Positive, Black = Negative) Wire Leads

Connector/Adaptor: Standard Male and Female Dean Connector with 14 AWG wire — $9.95
Connector:Standard Male and Female Dean Connector with 14 AWG wire. 14 AWG silicon wire with 6" (152mm) length. Max. load 30 Amp. Red wire indicates positive polarity. Black wire indicates negative polarity. Come with two pin female Dean plug. Come with two pin female Dean plug Vertical plug = Positive Horizontal plug = Negative Plug's dimension (LxWxH): 6.5mm (0.3") x 4.1mm (0.2") x 2.2mm(0.1").

NiMH Rechargeable Cell: D-Size 1.2 V 10000 mAh , button top (1 Pc) — $7.29
At an average cost of about $5.00 per 2 packs of Alkaline D batteries, these batteries can save you up to $5000.00 dollars over their useful life.

High Power Polymer Battery Combo: 11.1v 3000mAh (34.41Wh, 10-12C, w/o PCB) / Intelligent Charger — $99.95
Charge the pack 1-3 channel at a time with safe & fastest charging time by intelligent battery balance charger technology

NiMH Battery Combo: 12V 20Ah (240 Wh) With + Smart Chargers for Mobile Device — $269.95
Applications Designed for mobile device in field and replacing Lead acid batteries of electric bikes and scooters with 50% less weight, and Environmental friendly.

NiMH Rechargeable Cell: Sc Size 1.2V 4200 mAh 30A Rate NiMH Batteries without tabs (20 pcs) — $96.20
High drain current up to 30 Amps, perfect for various battery packs such as power tools, backup powers, RC toys, and electric guns and etc.

High Power Polymer Battery Combo: 2 pcs of 11.1v 3000mAh (34.41Wh, 10-12C, w/o PCB) / Intelligent Charger — $159.95
There is no PCB in discharging terminal. You must cut-off power before battery voltage dop to 2.5V /cell. Never discharge battery to zero voltage which will damage battery immedately.

Connector/Adaptor: 2 Standard Anderson in Parallel to 1 Standard Anderson (1.5' long, 12AWG, 40A rate) — $29.50
1 pcs 12AWG 1.5' long Connector Adaptor : 2 Standard Anderson in Parallel to 1 Standard Anderson. Max. load 40 Amp. Perfect for DIY with high power polymer li-ion pack. Red wire indicates positive polarity. Black wire indicates negative polarity. Note: Anderson connector has no difference in male and female, which can mate each other by two of them as picture shown below.

Li-Ion 18650 Battery: 7.4V 4800mah (35.5Wh) Flat Battery Module with PCB — $61.95
Li-Ion Battery may explode if charging or discharging improperly. User must have knowledge on how to charge and discharge Li-Ion battery before making Li-Ion Battery Pack.

Li-ion 18650 Battery: 14.8V 2400mah Battery Module (35.5Wh, Square 4S) with PCB — $72.95
You may build up 14.8V Li-ion pack with 7200 mAh or 9600mAh by parallel connection of three or four packs. However, in order to keep each 14.8V battery module in balance during charging, you must use smart charger to charge each 2400mAh module separately , then make parallel connection of each pack by Universal connector or other type of connector to form a 7.2Ah or 9.6Ah battery pack for discharging.

Customized NiMh Battery pack: 18V 10Ah (15xD) with wire in Hump configuration — $218.00
Customized NiMh Battery pack: 18V 10Ah (15xD) with wire in Hump configuration

NiMH Battery Pack: 12V 3800 mAh (Trail-Tech Female plug) for Bike Light with Fast Smart Charger / Bag — $49.95
12 V , 3800mAh NiMH battery packed by heavy duty rubber thermo-shink for both impact and water resistant. 10 pcs High quality Powerizer brand NiMH 4/3F cells inside can reach up to 1000 cycle life.

Connector/Adaptor: 2 Standard Female in Series to 1 Standard Anderson — $9.95
Perfect for Hi-Power li-ion pack ( Used for combining two standard Male Tamiya discharge terminal into one standard Anderson connector)

NiMH Battery Pack: 12 V 4500 mah ( 54Wh, 4.2A rate, 2Rx5, Sanyo 4/3AF) — $103.95
Please don't discharging the battery pack below 10V ( 1.0 V / cell). Deep discharging may damage NiMH battery pack.

E-Bike Conversion Kit: 36V 600W 26"Rim Brushless Motor+37V 10Ah Polymer Battery+3A Charger & Bag — $796.95
600W Hub Motor mounted in 26" rim wheel. Prewired thumb throttle with LED battery full -empty indicator. Prewired controller unit with 35 Amp current limit. Prewired key switch (for security). Bike rack Dimension (LxW): 300mm (11.8") x 135mm (5.3"). Easy to install within 30 minutes.

Polymer Li-Ion Battery: 14.8V 2500mAh (37Wh, 4.2A rate) with PCB — $64.95
Li-Ion battery may be exploded if misusing. We are not responsible for any damages or losses caused by misusing (included but not limited to: improperly charging / discharging, any changes of this battery pack, misassembling battery packs) .

Component: In-line Cord Fuse - 10 Amp Protection for DC Electric Equipment — $1.25
There is a fuse tube in the cord plastic tube body with screw, unscrew to open the body, replace the tube like below illustrator, then screw to close the tube body. Its very simple!

Connector/Adaptor: For 9 Volt Battery with 10" Wire Leads (Positive: Large Female pin, Negative: Small Female pin) — $0.59
Connector/Adaptor: For 9 Volt Battery with 10" Wire Leads (Positive: Large Female pin, Negative: Small Female pin)

NiMH Battery: 14.4V 5Ah with Trail-Tech female plug — $78.99
Can replace most bike lighting system on the market such as Nite-Rider, Light & Motion, Turbo Cat, Night Sun, Marwi, BLT, Vista, Cygolite, Nite Hawk, or Performance View Point at better quality and much lower price .

NiMH Battery Pack: 12V 2200mAh(10xAA) for RC Car — $28.95
12 volt Rechargeable battery pack. 2200 mAh in capacity. Dimension (LxWxH): 4"(102mm)x2.8"(73mm)x0.6"(15mm). Weight: 7.9Oz(223 grams). Unbelievable Run time. Specially design for RC Vehicles & Planes. Fits: Associated, HPI, LOSI, Traxxas, Tamiya, Kyosho, and all other standard 12V RC cars.

NiMH Battery Pack: 7.2 V 2200 mAH NiMH Battery Pack for Walking Robots — $14.95
7.2 V Ni-MH rechargeable battery pack is made of 6 x AA high capacity (2200 mAh) NiMH cells with 6" wire 18 AWG wire.

Water Bottle Li-Ion 18650 Battery: 14.8V 7200mAh (106.56Wh, 2A rate) with on-off switch & LED Indicator — $209.95
Li-Ion battery may be exploded if mis-using. We are not responsible for any damages or losses caused by misusing (included but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling battery packs) .

Polymer Li-Ion Cell: 3.7V 1500mAh (325085-2C, 5.55Wh, 3.0A rate) , extra thin- UL Listed — $9.95
The end user must have the technical knowledge necessary to charge and discharge Li-Ion batteries before making Li-Ion Battery Packs

Nokia 3310/3350 CellPhone Flashing Battery w/ a Beautiful Transparent Cover — $5.99
High quality Li-Ion battery with 3.6V and 900 mAh. Transparent battery back cover is included. Fit with Nokia 3350 and 3310 Cellular phones. More than 48 hours talking time, and 4-5 day standby time. Yes, you will get one flashing battery with a beautiful transparent phone cover andsave 60 % or more than any retail store!.

NiMH Battery Pack 6.0v 10Ah (5xD, 60Wh, 40A rate) — $56.95
Please don't discharging the battery pack below 5V ( 1.0 V / cell). Deep discharging may damage NiMH battery pack.

Component: 1 pc 60mm x 60mm connection plate (For Parallel Connection Only) — $1.50
Utilise for connect 4 pcs of 6M screw terminal cell together in parallel connection

Li-ion 18650 Battery: 14.8V 4.4Ah (65.12Wh, 2A rate) Battery with Waterproof on-off switch with LED Indicator — $89.95
Li-Ion battery may be exploded if mis-using. We are not responsible for any damages or losses caused by misusing (included but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling batterypacks) .

Li-Ion 18650 Battery: 25.9V 2600mAh (67.34Wh, 4.2A rate) battery module with PCM — $145.95
Overcharge (> 29.6 V). Over-discharge ( < 16.1V). Over drain ( > 10 Amp). Short circuits. Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

NiMH Battery & Charger Combo: 36V 10Ah + 1.8A Smart charger for E-Bike_1 — $395.95
Double check battery polarity connection to bike before plug in. Wrong polarity will burn out your controller on e-bike

NiMH Battery Pack 12V 4500mAh (50Wh 10x4/3AF ) for DIY Diving light: HID / Halogen — $48.95
Please don't discharge the battery pack below 10V ( 1.0 V / cell). Deep discharge may damage NiMH battery pack.

Connector/Adaptor: Cigarette Male plug to 5.5 x 2.1mm barrel male — $5.95
Connector/Adaptor: For 9 Volt Battery with 10" Wire Leads (Positive: Small Female pin, Negative: Large Female pin) - Connector: for 9 Volt Block Battery with 10" Wire Leads (Positive: Small Female pin, Negative: Large Female pin)

NiMH Battery Pack: 6v 2600mAh NiMH RX Pack for HPI Savage / Traxxas T-Maxx etc. RC Cars — $16.95
6 V, 2600 mAh powerful battery pack made of high quality matched NiMH 5 x AA cells with Mini Tamiya and BEC connector. Rapidly charge up and long cycle life, and no memory effect. Double service life. Cell: High quality 2600mAh AA. Discharge rate: 5amps. Wire: 22ga Rx, 14/16ga on mini Tamiya and BEC connectors. Size: L 2.00" x H 1.6" x W 1.25". Weight: 5.8oz. Perfect as Receiver battery pack for HPI Savage and Traxxas T-Maxx. Also good for RC Gas trucks with hi torque servos. Need a smart...

Wagan DC-AC Inverter 150W with Dual 110VAC Sockets — $35.95
* All Power Inverters have a Modified Sine Wave waveform (unless otherwise indicated), Overload Protection, Input Short-circuit Protection.

LiFePO4 18650 Battery: 12.8V 2700 mAh (Rectangle Pack, 34.56Wh, 7A rate) w.PCB — $49.95
If connect two modules in parallel, you can build a 12V 5.4 Ah Battery pack with a 14 Amp discharge rate.

NiCd Battery Pack: 6.0V 7000mAh (5xF) for Emergency Lighting etc — $61.95
Dual-Lite 12-802. Emergi-lite 002006. Emergi-lite 002208. Sure-Lites 26-63. Teledyne Big Beam Part # N-67F. Sure-Lites 26-63.

Connector/Adaptor: 2 Standard Anderson in series to 1 Standard Anderson (1.5' long, 8AWG, 70A rate) — $39.50
Note: Anderson connector has no difference in male and female, which can mate each other by two of them as picture shown below.

Customize LiFePO4 14505 Battery: 12.8V 600 mAh (4S Flat, 7.7Wh, 0.6A rate) with 5.5x2.1mm Male Barrel Connector & pcb — $24.95
Customize LiFePO4 38120P Battery: 12.8V 20Ah (256Wh, 100A rate - not protected ) with PCB - Customize LiFePO4 38120P Battery: 12.8V 10Ah (128Wh, 100A rate - not protected ) with PCB in a 12V SLA case (provided by customer)

NiMH Rechargeable Cell: AA Size, 1.2V 2600mAh -Button Top (1Pc) — $1.30
Powerizer (TM) Ultra high 2600mAh capacity means ultra long working power. Excellent performance in Digital Cameras, CD Players, Remote Control Vehicles, Metal Detectors, Flashlights, PDAs etc.. Designed to enable rapid charging and long cycle life. Last 2x longer than ordinary NiCd battery. Memory free operation provides great convenience. Can be use as exact replacement for most standard AA size batteries in almost all equipment.

Product ID # 2615 — $419.95
Home > NiMH Packs 2.4-48V > 12V Battery Pack Series > 12V Battery Packs from 10Ah to 52Ah > NiMH Battery Combo:12V 39Ah (468 Wh)+Three Channels Smart Chargers for Mobile Devices+3 to 1 Parallel Connection Tamiya Connectors Adaptor

NiMH Battery Pack: 12V 5Ah NiMH Battery Pack for replacement of Diving light ( Salvo 9Amp) — $49.95
Don't throw away that old Bike lighting system!! You may need the old connector to link with the battery. Many Mfgs make special and unavailable connector to make your life difficult

Power DC-AC Inverter: 200 Watt (84001) — $34.95
Add two AC outlets in your vehicle using the Power Inverter. The added convenience will allow you to charge batteries, power a laptop or run other AC electronics.

NiMH Battery Pack 7.2V 5000mAh (6xC 36Wh) for 6V Portable Devices — $36.95
Capacity: 5Ah ( 36 Wh). Double burntime than Ni-Cd battery pack. With standard Tamiya male connector. High performance with high capacity. Max. Discharging rate: 10 Amp. Dimension: 3"L X 2"W X 2"H. Weight: 1.2 Lb (545 g). Designed for run 6V halogen bike light from 5W - 30W, the burntime is about 5W Halogen light for 7 hours 10W halogen light for 3.6 Hrs 30W halogen light for 1.2 hrs.

Sealed Acid Battery 12V 7.0 AH for Emergency light (4 pcs ) — $89.99
Fit with Emergency light: Concealite 30204 for use in F5-50-2 & F5-75-90 Systems.

Polymer Li-ion Battery: 7.4V 6400 mAh (47Wh) with PCB / Fuel Gauge — $69.95
Li-Ion battery may be exploded if misusing. We are not responsible for any damages or losses caused by misusing (included but not limited to: improperly charging/discharging, any changes of this battery pack, mis-assembling battery packs...) .

Airsoft Gun Battery:9.6 V 2700 mAh ( 8xA) NIMH Square Pack for Airsoft Aug Guns — $39.95
Airsoft Gun Battery:9.6 V 2700 mAh ( 8xA) NIMH Square Pack for Airsoft Aug Guns

High Power Polymer Li-Ion Cell: 3.7V 4700 mAh (706285-8C) 17.39Wh, 37A rate — $15.95
The end user must have the technical knowledge necessary to charge and discharge Li-Ion batteries before making Li-Ion Battery Packs

High Power Polymer Li-Ion Box Battery: 25.9V 21Ah (543.9 Wh. 40A rate) in Aluminium Enclosure with fuel gauge — $669.95
Over-charge (> 29.6 V). Over-discharge ( < 16.1V). Over drain ( > 40 Amp). Short circuits. Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

Polymer Li-Ion Box Battery : 14.8V 11.4 Ah (168.72 wh, 14A rate) with Trail-Tech Female plug — $214.55
Li-Ion battery may be exploded if misusing. We are not responsible for any damages or losses caused by misusing (included but not limited to: improper charging/ discharging, any changes of this battery pack, misassembling battery packs) .

NiMH Battery Pack: 9.6V 10 Ah Square Battery (Dx8) for Dive light - UK D8 — $79.95
This battery pack is designed for converting dive light of UK D8 into rechargeable. You may need to make modification on wiring and connector to make it work.

Custom modification fee — $25.00
Handling fee to use USPS to ship - not liable for missing or damage during shipping! - Use USPS to ship - not liable for missing or damage during shipping and this does not include the actual postage fee!

Connector/Adaptor: Anderson Connector ( 8" long, 12AWG wire, 40A rated) — $7.95
Standard Anderson Connector. 12 AWG silicon wire with 8" length. Max. load 40 Amp. Perfect for DIY. Red wire indicates positive polarity. Black wire indicates negative polarity. Perfect for discharge terminal of Hi-Power Li-ion battery pack. Note: Anderson connector has no difference in male and female, which can mate each other by two of them as picture shown below.

NiMH Battery Pack: 12 V 5 Ah (60 Wh 2R Hump pack) for Portable Devices — $68.95
Please don't discharging the battery pack below 10V ( 1.0 V / cell) Deep discharging may damage NiMH battery pack.

NiMH Battery Pack: 12 V 2200mAh (10xAA) for Walking Robot — $27.95
Please don't discharging the battery pack below 10V ( 1.0 V / cell) Deep discharging may damage NiMH battery pack.

NiMH Rechargeable Cell: 4/3AF 4500 mAh NiMH Battery (10 Pcs) — $42.95
High quality 4/3AF ( Long AF ) NiMH 4500mAh Battery. Can be recharged rapidly at 1C rate up to 500 times!. Dimension (D x H): 18mm (0.71") x 67mm (2.64"). Weight: 2.2oz (62.3g). Memory free operation means convenience. Solderable Tabs at two ends are available as option with extra cost ( please choose in product option).

Aluminium Enclosure: 125 x68x60 (mm) — $9.95
1 pc extruded Aluminum case body with two end open External Dimension (LxWxH): 125mm(4.9") x 68mm(2.6") x 45mm(1.8") Internal Dimension (LxWxH): 112.5mm(4.4") x 53.5mm(2.1") x 45mm(1.8"). 1 pc Black ABS Cover without hole Cover's Dimension (LxWxH): 125mm(4.9") x 68mm(2.6") x 8.7mm(0.3"). 1 pc Black ABS Cover with 3 hole Cover's Dimension (LxWxH): 125mm(4.9") x 68mm(2.6") x 12mm(0.5") 1 pcs Cap without hole Black ABS installed 2 pcs Cap with hole Black ABS installed 2 additional Black ABS Cap without...

Polymer Li-Ion Cell: 3.7V 1400mAh (5.18Wh, 2.8A rate) — $8.95
The end user must have the technical knowledge necessary to charge and discharge Li-Ion batteries before making Li-Ion Battery Packs

10 Cells Smart Battery Charger: 2 in 1 + 10 pcs AA 2600mAh Cells + 10 pcs AAA 1000 cells — $49.95
Can recharge or power most of DC devices such as PDA, mobile phones, GPS equipment, flashlights, mp3 players, Game Boys, radios etc.

Polymer Li-Ion Cell: 3.7V 360 mAh (382248-1C, 13.32Wh, 0.36A rate) — $5.38
The end user must have the technical knowledge necessary to charge and discharge Li-Ion batteries before making Li-Ion Battery Packs