Hobby4Less

P51D 25.5'' Electric RC Airplane ARF — $49.88
Wing Span: 25.2 in / 640 mm. Wing Are: 116 sq in / 7.5 sq dm. Flying Weight: 0.6 lbs /280 g. Fuselage Length: 21.6 in /550 mm. Radio Required: 4channels、3servos、1 speed controller.

ESky Honey Bee 4 FP Electric RC Helicopter RTF w/ 2 Batteries — $86.88
Main rotor diameter: 520mm. Weight: 290g. Length: 510mm. Power system: 370motor. KIT/ARF/RTF: RTF/KIT. Control mode: normal. Transmitter: standard 4 CH. Mix controller: 4-in-1 controller (with Gyro, mixer, ESC, and receiver). Servo: 8.0g, 1.3kg/CM, 0.13S/60. Battery: 8.4V-650mAh Ni-MH.

EK1-0322, Landing Skid — $6.88

EK1-0005, 180 Motor 0.5 Pinion — $8.88

Plastic paddle (yellow) EK1-0512 — $3.00

EK1-0218, Bearing 23 — $5.88

EK1-0223, Tail motor heat-sink — $2.88

EK1-0561，Knighthead Set — $4.38

Y Connectors, 12 — $3.98

EK1-0000A, Motor 370# w/ 9T 0.5M Pinion (EK1-0000A) — $9.99
EK1-0000A, Motor 370# w/ 9T 0.5M Pinion (EK1-0000A)

Apache 2-Channel Electric RC Helicopter — $59.88
Full Function Radio Control Alpha Helicopter. Easy to Fly, stable control. complete LEFT/RIGHT, UP/DOWN Control (dual main rotor-with Counter rotating Propellers!). Pre-assembled. Dual Main rotor. Complete kit, with everything for flight. RADIO CONTROLLER IS INCLUDED. Charger is included. 7.2V 300MAH NI-MH BATTERY IS INCLUDED~ FREE AS BONUS!.

EK1-0000, Main Motor 370# w/ 10T 0.5M Pinion (EK1-0000) — $9.99
EK1-0000, Main Motor 370# w/ 10T 0.5M Pinion (EK1-0000)

EK1-0241, O ring, Rubber/Plastic ring"O" — $2.88

EK1-0266, Main Axis — $5.88

EK2-0851, Li-Po Battery Charger (EK2-0851) — $13.99

EK1-0000A, Main Motor 370# w/ 9T 0.5M Pinion — $9.99

Tail blade main shaft set EK1-0542 — $6.00

ESky Lama Coco Electric RC Helicopter — $84.88
4CH transmitter. New design 4 channels helicopter (pre-built,zero assembly time). New 4 IN 1 electronic board: Receiver + Speed Controller + Mixer + Gyro. Powerful 2* main motors type 180. Two 8g mini servos. One pair of crystals. 7.4V800mAh Li-Po battery. 11V power supply. English Manual. Extra Pair Of Main Blades.

EK1-0221, Training gear sets — $8.88

EK1-0314, Stabilizer Set — $5.88

EK4-0000, Main Blade (EK4-0000) — $9.99

Plastic paddle (white) EK1-0511 — $3.00

EK1-0239, Skid set — $4.88

EK1-0345, Bearing 42.5(2) — $2.99

Elevator Controlling set EK1-0526 — $4.00

EK1-0238, Main shaft drive gear set — $9.88

EK1-0283， Washout base set — $3.68

EK4-0004, Main Blade — $10.88

Servo Linkage Rod EK1-0548 — $6.00

Oneway bearing EK1-0510 — $6.00

EK1-0328, Bearing 44 — $6.88

EK1-0208, Servo push-rod set — $4.88

EK1-0216A, Vertical fin set — $2.88

EK1-0240, Battery hanger&Skid set — $9.88

EK1-0271, servo control — $4.88

EK1-0210, Battery hanger set — $6.88

EK1-0267, Main Axis — $4.88

EK1-0565, Main shaft set — $4.38

Tail Motor (EK1-0001A) — $9.99

EK1-0567, Tail push-rod set — $3.99

EK1-0213, Bearing 32.5 — $5.88

Tail servo control push-rod set EK1-0533 — $6.00

Brushless Speed Controller, 25A — $35.88
Peak Current:35amp. Rating Current:25amp. BEC:5V/2A. Weight:22g. Dimension:24 x 45 x 11(mm).

EK1-0233, Paddle — $3.88

Main Blades EK4-0009 — $12.88

EK1-0568, Canopy (Yellow) — $7.88

EK1-0318, Rotor Head & Link Set — $5.88

EK1-0290, Push link set — $4.99

Flybar case set EK1-0518 — $7.50

Redcat Caldera 10E 1/10 Scale Brushless Truck — $169.92
The NEW Caldera 10E brushless monster truck RC is an electrifying four-wheel drive monster that is ready to run right out of the box! The Caldera 10E is larger than the Volcano EP Pro and it also includes some features not found on other Redcat 1/10 Scale Electric Vehicles.

EK1-0324, Bearing Set — $5.88

Bearing 23mm EK1-0508 — $6.00

EK2-0901, Coach Wire (EK2-0901) — $9.88

EK1-0301， Screw & nut set — $3.99

EK1-0295， Tail rotor blade control set — $4.38

EK1-0229, Rotor head set — $8.88

Screws standby EK1-0531 — $8.00

Vertical & horizontal tail blade set (white) EK1-0545 — $6.00
Vertical & horizontal tail blade set (white) EK1-0545

EK1-0225, Screws/nuts/washers — $3.88

EK1-0268, Main shaft Retaining Collar — $4.88

EK1-0215, Tail rotor housing — $5.88

EK1-0206, Paddle control frame (outer) — $2.88

Ek1-0203, Center hub set — $7.88

EK1-0245, Ring-like push-rod — $3.88

EK1-0293，Servo controller — $2.99

EK1-0202, Main Blade (EK1-0202) — $9.99

EK1-0232, Flybar — $5.88

HM-036-Z-04 (Flybar Paddle Holder ) — $3.99

HM-060-Z-13 (Steering Holder ) — $9.99

Redcat Caldera 3.0 1/10 Scale Nitro Truck (2 Speed) Red — $169.92
A 2-Speed sealed transmission, explosive SH .18 3.00cc Nitro engine & slide carburetor make the Caldera 3.0 a volatile mini Mount St. Helens on or off the track. Faster acceleration leads to high octane excitement with this 4X4 monster truck equipped with aluminum alloy chassis, 4 big bore oil filled aluminum capped shocks , polycarbonate bash-resistant body, composite disc brakes and much more. This bold and aggressive 4X4 nitro monster trucks command attention with major MAGMA-tude!

HM-060-Z-23 (Main Gear Set ) — $15.99

HM-036-Z-27 (Tail Servo Rod Shaft ) — $3.99

HM-060-Z-26 (Taill Servo Rod Holder ) — $12.99

HM-060-Z-15 (Swashplate ) — $9.59

HM-036-Z-32 (Main Gear ) — $9.99

HM-036-Z-12 (Rotor Head ) — $4.99

Brushless motor for helicopter 58g 3800KV EK5-0006 — $29.00

HM-060-Z-29 (Rudder Servo Rod ) — $5.99

EK1-0320, Main Frame — $8.88

HM-036-Z-14 (Inner Rod ) — $3.99

HM-060-Z-28 (Belt Wheel ) — $5.99

HM-060-Z-45 (Kit Content ) — $9.99

EK1-0222, Allen Key & Fastener — $4.88

EK1-0312, Blade A — $6.88

Landing skid mat EK1-0505 — $3.00

Bearing 32.5mm EK1-0509 — $6.00

EK1-0294，Tail rotor blade — $3.68

EK1-0236, Servo push-rod set — $5.88

Main gear set EK1-0534 — $11.00

EK1-0237, Battery hanger set — $9.88

EK1-0200A, Rotor head set (EK1-0200A) — $3.99

HM-060-Z-32 (Locating Set ) — $9.99

EK1-0303, Main gear set — $7.68

Tail driven pedestal set EK1-0541 — $6.00

Main blade sustain set EK1-0504 — $3.00

EK1-0216B, Vertical fin set — $4.88

Flybar Paddle controling set EK1-0519 — $6.00

HM-036-Z-11 (Main Blade Transverse Shaft ) — $3.99

Outdoor first aid accessory EK1-0530 — $11.00

Main Frame set EK1-0523 — $7.50