Toolup.com

Leatherman 830950 Skeletool CX with Sheath — $79.85
* Needlenose pliers. * Regular pliers. * Wire cutters. * Carabiner/Bottle opener. * Removable pocket clip. * Universal bit driver. * Combination straight/serrated 154cm knife blade. * Bit storage handle. * Bits: Phillips #1 and #2, and Screwdriver 3/16" and 1/4".

3M 77 Spray adhesive 16.5 fl oz — $13.99

3M 90 16.25oz spray adhesive — $18.99

Hoover S2220 Flair Bagless with Powered Nozzle — $42.21
* Motor Amps: 8.2. * Motor Volts: 120V. * Cord Length: 20'. * Motor Speeds: 1 RPM. * Color: Red. * Bagless E-Z Empty Dirt Cup - No Bag to change!. * Powered nozzle for enhanced carpet and rug cleaning. * Lightweight. * Large rear wheels and swivel floor nozzle for added maneuverability. * 1 Year Manufacturer Warranty.

Channel Lock 386 386 Long Nose Plier — $17.23
● CHANNELLOCK® uses high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention

3M 80 Rubber & Vinyl Spray Adhesive — $16.24
* Featuring exceptional resistance to plasticizing oils, it forms durable, high-strength bonds to vinyl, leather, laminate, wood and most rubber and plastics.

Leatherman 830158 Surge Leather Sheath — $79.85
* Stainless Steel * All-Locking Blades * Needlenose Pliers * Regular Pliers * Wire Cutters * Hard-Wire Cutters * Stranded-Wire Cutters * Electrical Crimper * Clip-Point Knife * Serrated Knife * Scissors * Blade Exchanger * Diamond File Blade * Wood File Blade * Saw Blade * Large Bit Driver * Small Bit Driver * 5/16" Screwdriver * Awl w/Thread Loop * Ruler (9 inches/22 cm) * Bottle/Can Opener * Wire Stripped * Lanyard Ring * Two Double-Ended Bits

Hoover UH70120 WindTunnel® T-Series™ WindTunnel® Rewind™ Bagless Upright — $102.83
*Auto Cord Rewind Y. *Headlight N. *On Board Tools Y. *Turbo Tool Y. *Upholstery Brush Y. *Wand Y. *Air System DUAL_CYCLONE. *Motor Amps 12 AMP. *Assembly Required SCREWDRIVER. *Available in CA Y. *Available in US Y. *Brush Type MOTORIZED. *Brushroll Shutoff N. *Bumper Type SG. *Color SAGGRNMTL. *Cord Length 27 FT. *Cordless N. *Dirt Cup Y. *Filtration H. *Full Bag Indicator N. *Handle D_SHAPE. *Height Adjustment 5. *Hose Length 96 IN. *Hose Type S. *Nozzle Type WT. *Nozzle...

Makita 9227C 7" Electronic Sander-Polisher — $186.89
* Sanding disc 7". * Wool bonnet 7". * No load speed 600-3,000 rpm; amp 10.0. * Spindle thread 5/8"-11 UNC. * Overall length 18-1/2". * Hook-and-loop pad (743052-5). * Hex wrench (783204-6). * Variable speed (0-3,000 rpm) with pre-set maximum speed dial; ideal for ultra slow polishing. * Pre-set speed setting dial (from 600-3,000 rpm) for maximum control. * Electronic speed control maintains constant speed under load. * Easily converts to a sander. * 3-prong plug to prevent static electricity...

Energizer CHVCWB-2 1-Hour Charger (AA,AAA) — $9.99
* Charges AA and AAA batteries (NiMH Rechargeable batteries only). * Battery Chemistry: Nimh. * Cell Sizes:. * 2 to 4 AA batteries in pairs. * 2 to 4 AAA batteries in pairs. * Charge Rate:. * AA - 0.19 Amps. * AAA - 0.09 Amps. * CHVCWB2 Energizer Value Charger for AA / AAA Ni mh batteries. * Charges fully discharged batteries overnight. * Offers reverse polarity protection. * Built in safety timer and temperature control. * Trickle charge keep battery at full capacity. * Charge status...

DeWalt DW660 Heavy-Duty Cut-Out Tool — $54.28
* 5.0 Amps. * No Load Speed 30,000 rpm. * Collet Diameter 1/8, 1/4 ". * Adjustable Guide Yes. * Spindle Lock. * 1 General purpose bit. * 1 Drywall cutting bit. * 1/4", 1/8" Collet. * Tool-free bit change for fast and easy bit changing without a wrench. * Turn-on/bump-off switch allows users to easily shut tool off. * 5.0 Amp, 30,000 rpm motor provides more cutting power. * Slim body design for less fatigue over prolonged use. * Dust-sealed switch provides durability and long switch life...

Vise-Grip 10wr 10" Curved Jaw Locking Pliers with Wire Cutter 10WR — $10.91
* Curved jaw puts tremendous pressure on four points of any style nut or bolt head; includes convenient wire cutter. * Ideal for tightening, clamping, twisting and turning. * Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. * Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. * Guarded release trigger quickly unlocks and protects from accidental release. * Hardened teeth are designed to grip from any angle.

Tool Store - Leatherman Squirt — $27.99
Leatherman Squirt P4 Specifications: Length: 2.25 in. / 5.5 cm closed Weight: 2 ounces / 57 grams Materials: Stainless steel with anodized aluminum scales Color : Blue Leatherman Squirt P4 Features: Needlenose Pliers Straight Knife Wire Cutters Extra Small Screwdriver Medium Screwdriver Small Flat Phillips Screwdriver Single-Cut File Cross-Cut File Opener Lanyard Attachment Awl The first miniature pliers multi-tool tough enough to be a Leatherman. Attach the spring-action Squirt P4 to your key ring...

Hoover CH30000 PortaPower Lightweight Vacuum Cleaner — $90.39
*Compact and easy to carry (8.3 lbs). *Built-In Blower. *Tool set includes: crevice tool, wall/floor brush, dusting brush, furniture nozzle, rug/floor nozzle, two chrome wands, cord storage strap, and shoulder strap. *Convenient fingertip on/off switch. *Stretch hose for extended reach. *Includes a reusable commercial cloth bag with paper bag option. *Fits easily on stair tread for cleaning convenience. *Long 33' SJT cable length for large area cleaning. *Two Year Commercial Warranty.

DeWalt D26453K 5" Heavy-Duty Variable Speed Random Orbit Sander Kit — $79.00
* 3.0 Amps. * Orbits/Min 7,000-12,000 opm. * Orbit Diameter 3/32 ". * Dust Collection Yes. * Paper Size/Type 5", 8 Hole Hook & Loop. * Dust Sealed Switch. * Pad Break Yes - CFS. * Tool Weight 3.5 lbs. * Dust bag with vacuum adapter. * Heavy-duty kit box. * 3.0 Amp electronic variable speed motor adjusts from 7,000-12,000 opm providing ideal sanding speed for smooth finish. * Textured anti-slip top & body grip provides ultimate comfort and control during use. * Controlled Finishing System...

Klein D213-9 9" High-Leverage Side-Cutting Pliers — $29.99
* Handle Color: dark blue. * Handle Finish: plastic-dipped. * Jaw Length: 1-19/32". * Jaw Thickness: 5/8". * Jaw Width: 1-1/4". * Knife Length: 25/32". * Nose Type: Square. * Overall Length: 9-3/8". * High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other plier designs. * Sure-gripping, cross-hatched knurled jaws.

DeWalt DW788 20" Heavy-Duty Variable-Speed Scroll Saw — $502.73
* 1.3 Amps. * Strokes/Min 400-1,750 spm. * Stroke Length 3/4 ". * Depth Of Cut (inches) 2 ". * Hex wrench. * Blades. * Double parallel-link arm design dramatically reduces vibration and noise, for extremely accurate cuts. * Exclusive tool-free blade clamps allow blade changes in seconds. * On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm for added convenience. * Arm design pivots from the back of the saw to the...

Channel Lock 326 6" Long Nose Plier with Side Cutter — $14.63
* Length: 6" (150 mm). * Jaw Length: 2-5/69" (52.8 mm). * Cutting Length: 13/32" (10.5 mm). * Joint Thickness: 13/32" (10.5 mm). * Joint Width: 3/4". * Tip Width: 3/32" (25 mm). * Other: With Cutters. * (1) 6" Long Nose Plier with Side Cutter. * Cross-hatching on jaws grabs work tightly. * Precision made of fine polished, high carbon drop forged steel. * Perfectly mated cutters, scientifically heat treated to hold their edge. * Distinctive CHANNELLOCK BLUE comfort grips.

Energizer NH35BP-2 'C' Rechargeable Battery 2 pack — $9.99
* Classification: Rechargeable. * Chemical System: Nickel-Metal Hydride (NiMH). * Designation: ANSI-1.2H3. * Nominal Voltage: 1.2 Volts. * Rated Capacity: 2500 mAh* at 21°C (70°F). * Typical Weight: 66.0 grams (2.3 oz.). * Typical Volume: 27.0 cubic centimeters (1.6 cubic inch). * Terminals: Flat Contact. * Jacket: Plastic. * Based on 500 mA (0.2C rate) continuous discharge to 1.0 volts. * (1) 'C' Rechargeable Battery 2 pack.

Irwin 3012016PKSM Unibit Set #1, #3, #4 — $48.97
* Single-flute cutting edge for greater control through steps. * 3 flatted shank prevents slipping in drill chuck. * Non-skid self-starting tip eliminates skidding and the need for center punching.

Vaughan 999 20 oz. “999” Framing Hammer — $20.64
* Hickory Handle. * Head Weight: 20 oz. * Length: 14". * (1) 20 oz. “999” Framing Hammer. * Available in two lengths, with either smooth or milled face, its superb balance and comfortable grip make this hammer a favorite of tradesmen. Top quality, white hickory handle is triple wedged.

Leatherman 8611240 Expanse E33TX Folding Knife — $49.85
* Length (closed): 3.94". * Blade Length: 2.6". * Knife Weight: 3.75 oz. * 4 tools in one. * 154CM Stainless steep drop-point knife (combo straight/serrated Blade). * 1/4" Screwdriver. * Phillips Screwdriver. * Bottle opener/carabiner clip. * 60% Glass-filled Nylon and Stainless Steel Handle. * Blade Launcher. * Thumb Stud. * Locking Liner. * Stainless Steel Reinforced Handle. * Removable Pocket Clip. * 25-year Leatherman Warranty.

Motorola RDU2020 On-Site 2 Watt 2 Channel Two-Way UHF Radio — $209.00
* Power: 1W or 2W. * Standard Battery Chemistry Type: Lithium Ion. * Coverage Area: up to 250,000 sq. feet (20 floors). * Frequency Band: UHF. * Battery Life (Based on a 5/5/90 duty cycle): Up to 12 hours. * Alkaline Battery Capable: Yes. * Adjustable Power Levels: Yes. * Dimensions: 4.5"H x 2.2"W x 1.6" D (with standard battery). * Customer Programming Software: Yes. * Channel Spacing: 12.5, 25. * Cloning: with multi-unit charger (MUC) (not included). * Number of Channels: 2. * Programmable...

DeWalt DC750KA 3/8" 9.6V Heavy-Duty Cordless Drill / Driver Kit — $98.96
* Voltage: 9.6 V. * Max Power: 130 UWO. * Speed Settings: 2. * Maximum RPM: 0-300/0-1,100. * Clutch Settings: 15. * Chuck Size: 3/8". * Chuck Type: plastic, single sleeve. * Tool Weight: 3.4 lbs. * Drill/Driver. * (2) 9.6V batteries. * Charger. * Insert bit. * Carrying case. * Heavy-duty 3/8" single sleeve ratcheting chuck for tighter bit gripping ability. * Dual speed range (0-300/0-1100 rpm) that delivers maximum versatility. * 15-position adjustable cluctch offers maximum versatility...

Milwaukee 49-56-6960 1/4" Hole Saw Arbor — $10.10
* Shank: 1/4". * Thread: 1/2" - 20. * Pilot: 49-56-8003. * Compatibility: Hole Saws 9/16" to 1-3/16" Diameter. * 3 Milled flats for greater gripping capability in the chuck. * Can be used in 1/4" capacity drills and larger. * Can be used with 49-56-8003 pilot bit which is supplied with this Arbor. * One arbor and pilot bit per package.

Leatherman 830016 Kick with Leather Case — $25.19
* Length (closed): 4". * Leatherman Kick Tool. * Leather Case. * 420HC Clip Point Knife. * Needlenose Pliers. * Regular Pliers. * Wire Cutters. * Hard-wire Cutters. * Wire Stripper. * Small Screwdriver. * Large Screwdriver. * Phillips Screwdriver. * Bottle Opener. * Can Opener. * Ruler - 8" (19 cm). * Stainless steel handles with Zytel comfort-grip inserts. * Stainless steel body. * Black oxide version available. * Lanyard Ring. * 25-year manufacturer warranty.

Dremel 568 Grout Removal Kit — $22.14
* Grout Removal Kit, Dremel Brand. * Grout Removal Guide. * 1/16" Carbide Grout Removal Bit (569). * 30° cutting angle provides controlled cutting along the grout line. * A large window provides excellent visibility for better control. * Special guides keep the bit centered between tiles. * Removes both wall and floor grout. * The multiple slide depth adjustment helps orient the guide in the most suitable position with the rotary tool. * Removes grout up to 3/8" (9.5mm) below the face surface...

Porter Cable 43473PC DISH CARVING BIT — $51.51

Makita HK1810 Power Scraper with Case — $346.45
* Blows per minute 0-3200. * Impact energy 3.9J. * Amps 5.0. * Overall length 12-3/8". * 1-3/16" Scaling chisel (798265-3). * 2" Scaling chisel (798264-5). * Bull point (798266-1). * Dust cover (423154-0). * Plastic tool case (150640-5). * Air cushion hammering for long tool life. * Quick change bit retainer for easy changes. * Automatic brush cut-out system to protect motor. * Factory grease packed for reduced maintenance. * All ball bearing construction for longer tool life. * Powerful...

Hoover F5912900 SteamVac Spin Scrub TurboPower Carpet Cleaner — $161.01
*Crevice Tool N. *Self Propelled N. *Ready to Use Hose N. *Powered Hand Tool Y. *Nozzle Type RF. *Hose Type BMS. *Hose Length 96 IN. *Height Adjustment AUTO. *Full Bag Indicator N. *Dirty Water Capacity 1 GAL. *Cord Length 20 FT. *Clean Water Capacity 1 GAL. *Brushroll Shutoff N. *Motor Amps 12 AMP. *Upholstery Brush N. *Dusting Brush N. *Headlight N. *On Board Tools Y. *Turbo Tool Y. *Color BLACK. *Brush Speed 3_SPEED. *Swivel Casters N. *Available in US Y. *Available in CA...

Leatherman 8614240 Expanse E55BX Folding Knife — $69.85
* Length (closed): 4.5". * Blade Length: 3.1". * Knife Weight: 6.17 oz. * Phillips #1 & #2 screwdriver bit. * 3/16" & 1/4" screwdriver bit. * 6 tools in one. * 154CM Stainless Steel Drop-point Knife (combo straight/serrated blade). * Bit driver with bit storage in the handle. * Bottle opener/carabiner clip. * 60% Glass-filled Nylon and Stainless Steel Handle. * Thumb Stud. * Lockback. * Stainless Steel Reinforced Handle. * Removable Pocket Clip. * 25-year Leatherman Warranty.

ridgid 90107 10" Aluminum End Pipe Wrench - Model E-910 — $32.99
* Model #: E-910. * Nominal Size: 10". * Pipe Capacity: 1-1/2". * Ideal for jobs in close quarters and overhead applications. * Designed for easy access in close parallel lines. * 40% lighter than heavy-duty wrenches.

Dremel 7120 Diamond Wheel Point — $8.92
* Bit Diameter: 16/64″ (6.7 mm). * Color Code: Teal. * Shank Diameter: 3/32″ (2.4 mm). * Model Number: 7120. * Ideal for fine detail work on wood, jade, ceramic, glass, hardened steel and other hard materials. Removes material quickly and easily. * For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit. * Secure objects to a stable surface while working...

3M 8210 N95 Particulate Respirator (Box of 20) — $14.99
* Quantity: Box of 20. * Designed to help provide reliable protection against certain non-oil based particles. * Lightweight construction helps promote greater worker acceptance and comfort and increased wear time. * Features 3M's Advanced Electret Media (AEM). * Welded strap attachment. * Soft nose foam and adjustable nose clip and nose foam help provide a custom fit and secure seal. * Workplace applications include: grinding, sanding, sweeping, bagging, and other dusty operations.

Arrow HT50P Staple Hammer Tacker - Heavy Duty — $52.15
* ALL STEEL CONSTRUCTION. * HIGH CARBON HARDENED STEEL WORKING PARTS. * PATENTED JAM PROOF MECHANISMS. * PRECISION LOCKED REAR LOADING. * RETRACTABLE STRIKING EDGE. * SPECIALLY DESIGNED POWER GRIP HANDLES. * DURABLE CHROME FINISH. * (1) Staple Hammer Tacker - Heavy Duty.

Lenox 14CT 7/8" Carbide Tipped Hole Saw — $18.08
* Tooth hardness RA 90 - 93. * 1-1/2" (38mm) cutting depth. * 6 - 7 degree positive rake. * Triple chip ground tooth form. * 3 teeth per inch. * Use arbor number 1L or 4L & 123CT pilot bit. * Greater wear resistance than bi-metal.

ridgid 31360 Strap Wrench — $52.85
* Handle Length: 18". * Strap Length: 29-1/4". * Strap Width: 1-3/4". * Pipe Capacity: 5". * Tube Capacity: 7". * Best for any polished pipe. * Strong, woven nylon strap gives tight grip. * Two models available for plastic pipe. * Polyurethane-coated strap. * Replaceable straps available.

Klein J2000-9NE 9" Journeyman Side-Cutting Pliers — $42.49
* Handle Color: light-blue/black. * Handle Finish: Journeyman. * Jaw Length: 1-19/32". * Jaw Thickness: 5/8". * Jaw Width: 1-1/4". * Knife Length: 25/32". * Nose Type: New England. * Overall Length: 9-1/2". * 2000 series cuts ACSR, screws, nails and most hardened wire. * High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other plier designs. * Streamlined design with sure-gripping, cross-hatched knurled jaws. * Induction-hardened cutting...

Lenox 41L 2-9/16" Bi-Metal Hole Saw — $14.13
* Diameter: 2-9/16". * Pipe Tap:-. * Pipe Entrance: -. * Arbor: 2L, 6L, 3L or 7L. * Thick backing plate risists damage and increases life. * Patented Vari-Tooth design optimizes cutting for fast cuts and long tool life. * Bi-Metal Construction creates a hardened edge to minimize tooth stripping.

Lenox 4L 1/4" Shank Hole Saw Arbor — $7.82
* Fits Hole Saws : 9L-19L. * Shank Type: 3 sided. * Shank Size (Inches): 1/4" & larger. * Added durability-. * Starts on contact-. * Simple plug ejection -. * Easy to use -.

Lenox 41CT 2-9/16" Carbide Tipped Hole Saw — $36.93
* Diameter: 2-9/16 " (65 mm). * Arbor Number 2L, 2SL, 7L. * Tooth hardness RA 90 - 93. * Tooth tips welded to backing material. * 60 - 7 degree positive rake. * Triple chip ground tooth form. * 3 teeth per inch. * 1-1/2" (38mm) cutting depth. * Greater wear resistance than bi-metal.

Klein 32476 5-in-1 Screwdriver/Nut Driver — $10.25
* Contains: 5/16" nut driver, #1 and #2 Phillips, 9/32" slotted and 3/16" slotted. * End of handle is marked to quickly identify tool. * Features 5/16" nut driver, #1 and #2 Phillips, 9/32" Slotted and 3/16" slotted.

Klein 11055 Klein-Kurve Wire Stripper/Cutter – Solid and Stranded Wire — $18.99
* Handle Color: Blue and Yellow. * Overall Length: 7-1/8". * Screw Shearing: 6-32 & 8-32. * Strips and Cuts:10 - 18 AWG Solid (4.0 - .75 mm& 12 - 20 AWG Stranded. * Precision shear-type blades for clean cuts on solid and stranded copper wire. * Easy-to-read markings on both sides. * Curved handles help reach into confined areas. * Wire looping and bending holes. * Coil spring provides fast self-opening action. * Precision-ground stripping holes. * Strong-gripping serrated nose; for easy...

Fire Extinguisher 5# BRACKET 5# vehicle bracket — $5.42
Fire Extinguisher 5# BRACKET5# vehicle bracket

Lenox 56L 3-1/2 " Bi-Metal Hole Saw — $15.27
* Diameter: 3-1/2". * Pipe Tap:-. * Pipe Entrance: -. * Arbor: 2L, 6L, 3L or 7L. * Thick backing plate risists damage and increases life. * Patented Vari-Tooth design optimizes cutting for fast cuts and long tool life. * Bi-Metal Construction creates a hardened edge to minimize tooth stripping.

Porter Cable 43395PC 5/16"DIA ARBOR — $13.79

Dremel 199 3/8" High Speed Cutter — $4.19
* Shank: 1/8". * Bit Diameter: 3/8" Point. * Used for shaping, hollowing, grooving, slotting. * Also used for making tapered holes in soft metals, plastics and woods. * Specially designed for slots.

Dremel 106 1/16" Engraving Cutter — $2.17
* Bit Diameter: 1/16". * Shank: 3/32". * Color Code: Teal. * Collet for Dremel 481 and 587. * Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. * A high-speed cutter designed for precision engraving.

ridgid 90127 24" Aluminum End Pipe Wrench - Model E-924 — $103.24
* Model #: E-924. * Nominal Size: 24". * Pipe Capacity: 3". * Ideal for jobs in close quarters and overhead applications. * Designed for easy access in close parallel lines. * 40% lighter than heavy-duty wrenches.

Vise-Grip 2078965 5" Bent Nose Pliers — $10.60
* 45 degree bend in nose. * Smooth jaws prevent surface marring. * Nickel chromium steel construction for overall strength and durability. * ProTouc grip for comfort and reduced hand fatigue. * Spring loaded for easy gripping and reduced hand fatigue. * High leverage for greater force at the jaw.

ridgid 31005 8" Straight Pipe Wrench - Model 8 — $14.40
* Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws.

Tool Store - Leatherman Crunch — $76.99

Klein D213-9NECR 9" High-Leverage Side-Cutting Pliers - Connector Crimping — $37.20
Klein D213-9NECR Specifications: Handle Color: Yellow Handle Finish: plastic-dipped Jaw Length: 1-19/32" Jaw Thickness: 5/8" (16) Jaw Width: 1-1/4" (32) Knife Length: 25/32" (20) Nose Type: New England Overall Length: 9-3/8" Klein D213-9NECR Features: Crimping die behind hinge for superior leverage crimping non-insulated connectors lugs and terminals. High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other plier...

Greenlee 801K Premium Tone and Probe Kit — $168.09
* Premium Tone and Probe Kit. * 77HP/6A High Power Tone Generator. * 200FP Filter Probe in a convenient Cordura case. * Designed for more accurate wire identification, the 801K virtually eliminates power-related noise from the tone and probe operation.

Irwin 88818 1-1/8 speedbor bit — $4.89
* Blue-Groove point and cutting edge for faster chip removal - 4x faster than standard spade bits. * Double cutting spurs scribe the outside of the hole reducing breakout. * 10% larger shank for added durability. * Grooved hex shank prevents slipping in drill chuck or bit extension. * Fits all standard quick change chucks.

ridgid 31345 Strap Wrench — $33.30
* Handle Length: 11-3/4". * Strap Length: 30". * Strap Width: 1-1/8". * Pipe Capacity: 2". * Tube Capacity: 5-1/2". * Best for any polished pipe. * Strong, woven nylon strap gives tight grip. * Two models available for plastic pipe. * Polyurethane-coated strap. * Replaceable straps available.

Milwaukee 48-00-5184 6" x 18TPI Bi-Metal Super Sawzall Blade — $10.84
* Length: 6". * Teeth Per Inch: 18. * Material: Bi-Metal. * Applications: Metal 1/8" - 3/16", conduit, tubing, channels, pipe. * Quantity: 5 per pack. * Made with Matrix II high speed steel teeth containing 8% Cobalt to keep a sharper tooth edge longer. * Bi-Metal design allows faster cutting, longer life blades that can bend without shattering. * Manufactures Sawzall blades for the toughest professional applications. * Heat treated to maximize performance in specific cutting applications...

ridgid 34572 Model 152-P Quick-Acting Tubing Cutter for PVC — $67.65
* Model No.: 152-P. * Capacity: 1/4" -2". * Standard Wheel: E-5272. * Quick-Acting Design. * I-Beam construction. * Hardened wear surfaces. * Thrust bearing slide assemblies for smooth operation. * Models 151 and 152 feature fold-away reamers.

Rubbermaid 4500-89 Service Utility cart — $145.00
Specifications Lipped Shelf Heavy Duty 500 Lb Load Capacity 5 In Caster Size Length 39 Inches Width 18 Inches Height 33 Inches Structural Foam Polypropylene Construction

Dremel 335 Plunge Router Attachment — $19.70
* Plunge Router Attachment. * Converts Dremel rotary tool into mini-router. * Easy-guide handles and convenient bit storage. * Edge guide. * Depth adjustment markings. * For use with Dremel models 245, 250, 270, 275, 280, 285, 370, 380, 395.

DeWalt DCK251X 18V XRP Hammerdrill/Recip Saw Combo Kit — $346.45
* Voltage: 18V. * Number of Tools in Kit: 2. * DCD950 XRP 1/2" 18V Hammerdrill/Drill/Driver. * DC385 XRP 18V Reciprocating Saw. * 1-hour NiCd/NiMH/Li-Ion Charger. * (2) 18V XRP Batteries. * 360° Side Handle. * Contractor Bag. * DCD950 XRP 18V cordless hammerdrill with patented 3-speed all-metal transmission and 1/2” self-tightening chuck delivers 450 units watts out of maximum performance, faster application speed, and superior bit retention. * DC385 XRP 18V cordless reciprocating saw with...

DeWalt DW7187 Heavy Duty Adjustable Miter Saw Laser System — $61.91
* Adjustable Laser Line. * Powered by the saw (no batteries). * Power Supply. * Laser Module. * Adjustment Wrenches. * Adjustable laser line allows user to adjust line to the left or right side of blade. * On/Off switch allows laser to operate with or without blade spinning. * Protected laser diode in optimum location delivers long-term durability while keeping laser diode clear and visible. * Bright laser line delivers enhanced visibility in low and high light locations. * Upper guard mount...

Lenox 25L 1-9/16 Hole Saw — $8.79
* Diameter: 1-9/16". * Pipe Tap: -. * Pipe Entrance: -. * Arbor: 2L, 6L, 3L or 7L. * Thick backing plate risists damage and increases life. * Patented Vari-Tooth design optimizes cutting for fast cuts and long tool life. * Bi-Metal Construction creates a hardened edge to minimize tooth stripping.

ridgid 31105 24" Aluminum Straight Pipe Wrench - Model 824 — $81.70
* 24" Aluminum Straight Pipe Wrench - Model 824. * Nearly 40% lighter than comparable cast-iron models of the same size. * Jaws and all other parts identical to RIDGID Heavy-Duty Wrenches. * Also available with special hook and heel jaws for plastic coated pipe.

Dremel 107 3/32" Engraving Cutter — $2.15
* Bit Diameter: 3/32". * Shank: 3/32". * Color Code: Teal. * Collet for Dremel 481 and 587. * Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. * A high-speed cutter designed for precision engraving.

Klein D213-9NE-INS 9" Insulated High-Leverage Side-Cutting Pliers — $64.82
* Handle Color: orange. * Handle Finish : insulated. * Jaw Length : 1-19/32". * Jaw Thickness: 5/8". * Jaw Width : 1-5/16". * Knife Length: 25/32". * Nose Type:New England. * Overall Length: 9-5/8". * Individually tested to exceed standards. * High-leverage design provides 46% greater cutting and gripping power than other plier designs. * Streamlined design with sure-gripping, cross-hatched knurled jaws. * Custom US-made tool steel. * Integral guards help prevent hand contact with conductive...

Starrett A1 Hole saw arbor — $7.38
Starrett A1Hole saw arbor

makita 6261DWPLE 9.6V 3/8" Cordless Driver-Drill and Flashlight Kit — $111.48
* Steel Capacity: 3/8". * Wood Capacity: 13/16". * RPM Low: 0 - 350. * RPM High: 0 - 1,200. * Battery: 9.6VDC (1.3Ah). * Length: 7-9/16". * Maximum Torque: 200"-lbs. * Watt hours: 12.5. * Battery Type: Ni-Cd. * (1) 3/8" Cordless Driver-Drill. * (2) 9.6V Ni-Cd Battery PA09. * (1) Universal Charger. * (1) Phillips/slotted bit. * (1) Battery cover. * (1) Plastic tool case. * (1) Flashlight. * Weighs only 3.1 lbs. for easy handling. * 16 torque settings plus drill mode for optimum torque...

Porter Cable 691 1-1/2" HP D-Handle Router — $165.63
* Power: 120V. * Peak HP: 1-3/4. * Motor Amps: 11. * Motor Diameter: 3-1/2". * Speed RPM: 27,500 RPM. * Collets: Standard: 1/4" & 1/2". * Available: 3/8". * Height: 8". * Base: D-Handle. * Router motor (6912). * Base (6911). * 1/4" collet (42999). * 1/2" collet (42950). * Collet wrenches (42596). * Operating manual. * 11 Amps, AC only, 27,500 RPM, 1/4" & 1/2" collets. * Precision machined aluminum motor housing & base. * Auto-release collet system ends "frozen" bits. * 100% sealed...

Klein 5417 Bull-Pin Holder - Slotted — $13.21
* Belt Connection: slotted. * Overall Size: 3-1/4" x 11". * Belt Width: up to 2". * Leather construction. * Holder for Klein bull pins. * Riveted to assure long life. * Holds all standard bull pins.

Dewalt DW7440RS Heavy-Duty Rolling Table Saw Stand — $169.00
Dewalt DW7440RS Specifications: Portable stand For use with Dewalt table saws Dewalt DW7440RS Features: Lightweight design weighs only 33lbs. delivers 20% less weight to carry than other competitive mobile stands Heavy-duty kick stand allows the stand to balance upright for mobility and storage Quick connect stand brackets attach to saw for easy detachment from stand Wide stand base and offset rear legs provide stability and support for material feed control Folding...

Dremel EZ402 EZ Lock Mandrel — $7.97
* Use with EZ Lock Wheels. * Color Code: Brown. * One-piece mandrel design eliminates the need for screw. * Compatible with all Dremel rotary tools. * First patented system of its kind.

Dewalt DCK275L 18V XRP Li-Ion Hammerdrill/Impact Kit — $399.00
Dewalt DCK275L Specifications: Voltage: 18V Number of Tools in Kit: 2 Dewalt DCK275L Includes: DCD970 XRP 18V Cordless Hammerdrill DC827 18V Impact Driver 1 Hour NiCd/NiMH/Li-Ion Charger (2) 18V XRP Lithium-Ion Batteries 360degrees Side Handle Contractor Bag Dewalt DCK275L Features: DCD970 XRP 18V cordless hammerdrill with patented 3-speed all-metal transmission and 1/2 self-tightening chuck delivers 450 units watts out of maximum performance faster application...

Hoover S3755050 WindTunnel Bagless Canister — $186.25
*Brushed Edge Cleaning Y. *Dusting Brush Y. *Headlight Y. *On Board Tools Y. *Turbo Tool N. *Upholstery Brush Y. *Wand Y. *Motor Amps 12 AMP. *Brushroll Shutoff N. *Color SLVRBLK. *Cord Length 25 FT. *Cordless N. *Dirt Cup Y. *ETL Listed N. *Filtration H. *Full Bag Indicator N. *Height Adjustment 3. *Hose Length 72 IN. *Hose Type S. *Motor Speeds Variable RPM. *Nozzle Type WT. *Powered Hand Tool N. *Ready to Use Hose Y. *Self Propelled N. *Motor Volts 120 V. *Bagless Y. ...

Ridgid 31345 Strap Wrench — $33.30
Ridgid 31345 Specifications: Handle Length: 11-3/4" Strap Length: 30" Strap Width: 1-1/8" Pipe Capacity: 2" Tube Capacity: 5-1/2"Ridgid 31345 Features: Best for any polished pipe. Strong woven nylon strap gives tight grip. Two models available for plastic pipe. Polyurethane-coated strap. Replaceable straps available.

Klein 11047 Wire Stripper/Cutter — $13.99
* Handle Color: Yellow. * Overall Length: 6-1/4". * Strips and Cuts: 22 - 30 AWG solid. * Compact, lightweight wire-stripping and cutting tools. * Narrow nose fits into tight places. * Hardened steel with precision ground stripping holes. * Do not use for cutting steel wire or bolts. * Spring-loaded action for self-opening. * Precision-ground stripping holes for easy removal of insulation. * Easy-to-read wire gauge markings on both sides for stripping in either direction. * Black-oxide...

Porter Cable 5561 Biscuits Size 10 (Tube of 125) — $6.54
Porter Cable 5561 Specifications: Size: 10 Porter Cable 5561 Includes: (125) Biscuits in Tube Porter Cable 5561 Features: Plate joining biscuits

Greenlee 46118 RJ11 Die — $32.78
* 4 and 6 position die. * Also sold with Kwik Cycle 9" Crimping Tool (45541).

Nicholson 17751 12" Cabinet Rasp, Regular (Second Cut) File — $19.71
* File Cut: Regular Second. * Length: 12 in. * Style: Half Round. * (1) 12" Cabinet Rasp, Regular (Second Cut) File. * American pattern rasp, half round cabinet, second cut. * Used by cabinetmakers and woodworkers. * Half round. * Single cut on edges. * Curved side of rasps similar to half-round rasps but has larger radius.

Irwin 39104 1/4" x18" Power Drill Installer Bit — $10.99
* Constructed of premium alloy steel for boring into a variety of materials including wood, plaster, and metal lath. * Special 82 degree point for fast boring. * Wire hole at the tip of the bit makes it easy to pull wire through walls, ceilings, and floors. * Ideal for installation of small wire for telephones, cable, TV, computers, and security systems.

Dremel 4000-3/34 High Performance Rotary Tool Kit with 34 Accessories — $88.54
* Amperage: 1.6 Amps. * Cord Length: 6'. * Speed: 5,000 to 35,000 RPM. * Voltage: 120 AC, 50-60 Hz. * (1) Variable Speed High Performance Rotary Tool. * (2) Cutters. * (1) 401 Mandrel. * (1) 402 Mandrel w/ Screw. * (1) 403 Bristle Brush. * (1) 407 Coarse 1/2" Sanding Drum. * (1) 408 1/2" 60 Grit Sanding Band. * (2) 411 3/4" Sanding Discs, 180 Grit. * (1) 412 Sanding Disc, 220 Grit. * (1) 413 3/4" Sanding Disc, 240 grit. * (3) 414 Small Felt Wheels. * (2) 420 Heavy Duty Emery Cut-Off...

Leatherman 830159 Surge Nylon Sheath — $79.85
* Stainless Steel * All-Locking Blades * Needlenose Pliers * Regular Pliers * Wire Cutters * Hard-Wire Cutters * Stranded-Wire Cutters * Electrical Crimper * Clip-Point Knife * Serrated Knife * Scissors * Blade Exchanger * Diamond File Blade * Wood File Blade * Saw Blade * Large Bit Driver * Small Bit Driver * 5/16" Screwdriver * Awl w/Thread Loop * Ruler (9 inches/22 cm) * Bottle/Can Opener * Wire Stripped * Lanyard Ring * Two Double-Ended Bits

Milwaukee 49-22-4025 13 Piece General Purpose Ice Hardened Hole Saw Kit — $80.99
* Nine (9) Hole Saws: 3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/2". * Two (2) Arbors: 49-56-7010, 49-56-7250. * Two (2) Pilot Bits: 49-56-8010 (assembled with arbors). * Ice Hardened™ cryogenically treated for up to 50% longer life. * Optimized tooth form for up to 2X faster cutting. * Wide, angled & offset slots for easy plug access. * Bi-metal construction with 8% cobalt for increased wear resistance. * TPI/Grit Carbide Grit. * Package Quantity 1.

Igloo 4101 10 Gallon Beverage Cooler — $65.99
* Product Dims: L17.25" x W15.81" x H23.25". * Internal Dims: L12.5" x W19.1". * Capacity: 10 Gal. (37.9L). * (1) 10 Gallon Beverage Cooler. * Igloo delivers cold, clean water. Rugged, durable Igloo 400 Series Industrial Strength Water Coolers keep water cold, clean and available. Built for the Real World, the 400 Series takes the abuse of the toughest job site and the most punishing work crews. Red and Yellow high visibility safety colors. HDPE hide won't chip, peel, buckle or rust. Ultratherm...

Tool Store - Cartridges — $11.99

Igloo 431 3 Gallon Beverage Cooler — $36.99
* Product Dims: L13.5" x W13.75" x H14.13". * Internal Dims: L9.5" x W10.4". * Capacity: 3 Gal. (11.4L). * (1) 3 Gallon Beverage Cooler. * Igloo delivers cold, clean water. Rugged, durable Igloo 400 Series Industrial Strength Water Coolers keep water cold, clean and available. Built for the Real World, the 400 Series takes the abuse of the toughest job site and the most punishing work crews. Red and Yellow high visibility safety colors. HDPE hide won't chip, peel, buckle or rust. Ultratherm insulation...

EstWing E328SM 28 oz Solid Steel Nail Hammer Milled Face — $32.04
* (1) 28 oz Solid Steel Nail Hammer Milled Face. * Estwing's Solid Steel Framing Hammer has a longer handle for more striking power. * The head and handle are fully polished and forged in one piece. * Our exclusive Nylon Vinyl Shock Reduction Grip® is molded on and offers the utmost in both comfort and durability, while reducing vibrations caused by impact.

DeWalt Dw4856 6 Piece Wood/Metal Cutting Reciprocating Saw Blade Set — $13.09
* Number of Blades 6. * DW4802 (6TPI). * DW4806 (10TPI). * DW4808 (14TPI). * DW4811 (18TPI). * DW4813 ((24TPI). * DW4847 (5/7TPI). * Used for cutting a wide variety of materials ranging from wood and metal to plastic and drywall. * In general, lower tooth counts cut faster, but provide a rougher finish. * Blades will fit all brands of reciprocating saws.

Freud SD208 8" Stack Dado Saw Blade — $106.07
* Negative hook angle for splinter free cuts. * Anti-kickback design good for underpowered saws. * Slot widths from 1/4-inch to 13/16-inch in 1/16-inch increments. * Resharpenable blades. * shims for micro adjustments. * case.

Bosch 11255VSR Bosch BULLDOG Xtreme 1" SDS-Plus Rotary Hammer — $230.52
* Amperage: 7.2. * Impact Energy: 2.2' lbs. * No Load RPM: 0 - 1,300. * No Load BPM: 0 - 5,800. * Optimal Concrete Capacity Range: 3/16" - 5/8". * Max. Hole Diameter in Concrete: 1". * Max. Hole Diameter in Concrete-Thin Wall Core Bit: 2-5/8". * Max. Hole Diameter in Steel: 1/2". * Max. Hole Diameter in Wood: 3/4" - 1". * Length: 17-1/4". * Bit Capacity: 1" Solid Bit; 2-5/8" Thin Wall Core Bit. * Rating: 120V. * Certifications: UL. * (1) SDS-PLus Rotary Hammer Tool. * (1) Auxiliary...

DeWalt DW268 Variable Speed Versa-Clutch Screwdriver, Reversible — $176.82
* Amps: 6.5 amps. * No-load speed: 0 to 2,500 rpm. * Clutch: Versa-Clutch system. * Torque: 132 in./lbs. * Max. fastener size: #14. * Helical-cut steel, heat-treated gears for long life and durability. * High-power motor for metal-fastening applications. * Versa-Clutch torque-adjustment system dials the proper torque needed to efficiently drive fasteners without stripping or breaking them. * Rubber grip and 2-finger trigger for increased comfort. * Also available in 220 volts. * Excellent...

DeWalt D51850 Heavy-Duty 20° Full Round Head Framing Nailer — $268.60
* Nail Style: Full Round Head. * Magazine Angle: 20° to 22°. * Nail Length Capacity: 2" to 3-1/2". * Nail Diameter Range: .113" to .148". * Magazine Capacity: 65 nails. * Engine Valve Type: Drop-sleeve. * Jam Clearing: Requires 5mm or 3 /16 allen key. * Dry Fire Lockout: Yes. * Integrated Rafter Hook: Adjustable 360°. * Depth Setting: Tool Free. * Energy @ 100 psi: 680 in/lbs. * Tool Length: 21-1/4". * Tool Height: 14-1/4". * Tool Weight: 8.2 lbs. * Safety glasses. * Bump fire trigger...

Irwin 536qcn 36" Quick-Grip One-Handed Bar Clamp — $29.99
* Quick-Change jaw quickly converts from clamp to spreader and requires no tools. * Constructed of high-tech reinforced resin for strength and durability. * Exerts up to 250 lbs. of clamping pressure. * Patented pistol grip design enhances comfort and ease of use. * Non-marring pads grip firmly and protect work. * Ideal for clamping/gluing, holding work for sawing/drilling, and positioning work for fastening.

Dewalt DW2169 38-Pc. Impact Ready Accessory Set — $36.06
INCLUDES: 8 #2 Phillips 1-inch insert bits 8 #2 Phillips 1-inch drywall reduced diameter insert bits 5 #2 Phillips 2-inch black oxide power bits 8 #2 Phillips 1-inch double-ended bit tips 1/4-inch nut driver 5/16-inch nut driver 3/8-inch socket adaptor 3/8-inch drive with a 9/16-inch deep socket 3/8-inch drive with a 3/8-inch deep socket 3/8-inch drive with a 7/16-inch deep socket 3/8-inch drive with a 1/2-inch deep socket 3-inch stainless steel magnetic bit tip holder with hog ringFEATURES: Includes...

Irwin 88811 11/16 speedbor bit — $3.04
Standard Length Spade Bits Blue-Groove point and cutting edge for faster chip removal - 4x faster than standard spade bits Double cutting spurs scribe the outside of the hole reducing breakout 10% larger shank for added durability Grooved hex shank prevents slipping in drill chuck or bit extension Fits all standard quick change chucks

Lenox 88L 5-1/2" Hole Saw — $65.16
* Diameter (Inches): 3-5/8". * Pipe Tap :(Inches): -. * Pipe Entrance (Inches): 3. * Use Arbor : 2L, 3L or 6L or 7L. * Added durability. * Unique tooth configuration. * Resists tooth strippage. * Use standard arbor.

Klein 5102-12 12" Canvas Tool Bag — $56.40
* Depth: 10". * Length: 12". * Width: 6". * Heavy-duty No. 8 natural canvas. * Rivet-reinforced for durability. * Steel-frame mouth with hinge for rugged use. * Stitched and riveted leather handles for comfort and strength. * Two retaining straps with buckles provide secure closure. * Moisture-resistant, vinyl bottom, and lower sides. * Non-scratch studs on base protect against wear. * Retro-fit bags with shoulder strap kit (Cat. No. 5102S). Kit includes leather strap with pad and snap...

Ridgid 31667 Model 156-P Quick-Acting Tubing Cutter (for plastic) — $128.17
Ridgid 31667 Specifications: Capacity: 4" - 6"Ridgid 31667 Features: Quick-Acting Design I-Beam construction Hardened wear surfaces. Thrust bearing slide assemblies for smooth operation. Models 151 and 152 feature fold-away reamers.

Porter Cable 5554 PLATE JOINING BISCUITS "ASSORTED" SIZES (1,000 PER BOX) — $18.23
Porter Cable 5554 PLATE JOINING BISCUITS "ASSORTED" SIZES (1,000 PER BOX)

ridgid 31320 Model C-18 Heavy-Duty Chain Wrench — $83.14
* Rated Pipe Capacity: 2-1/2". * Actual O.D. Capacity: 5". * Chain Length: 20-1/4". * A double jaw gives fast, ratchet-like action in either direction. * The heavy-duty model has replaceable alloy steel jaws. * The light-duty model has a one-piece forged alloy steel handle and jaw. * Ideal for use in close quarters.