This is a ShopWiki Listed Store. Your store can become one too! Also, consider upgrading to a ShopWiki Partner Status by joining our Approved Store or Premier Store Program.
Red River Aggressor — $19.50
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Red River Blue Shift — $19.50
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue.
Blue Streak Rocket — $10.51
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue. Finishing supplies like sandpaper and spray paint.
Daddy Long Legs — $19.49
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue. Finishing Supplies like sanding sealer, paint and sandpaper (200 and 400 grit).
Steel Quick Links See Below — $3.75
A deployment bag is a device to help ensure that parachute inflates properly and in the correct order. It forces the lines to completely stretch out first, and then the canopy is released so that it can properly inflate. It also minimizes the loads on the suspension lines to prevent tears, and it gives additional protection from the heat of the ejection charges. If you're doing high power rockets, you really need this extra insurance to make your project a success.
Apogee Daddy Long Legs — $19.49
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue. Finishing Supplies like sanding sealer, paint and sandpaper (200 and 400 grit).
INVADER — $29.95
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue.
Apogee Blue Streak — $10.20
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue. Finishing supplies like sandpaper and spray paint.
Daddy Long Legs — $19.49
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue. Finishing Supplies like sanding sealer, paint and sandpaper (200 and 400 grit).
PNC-56A BT-70 Size — $13.96
"Yes, my order arrived, and I was VERY pleased with how quickly it got here. Thanks so much for your quick shipment! My previous order was handled well, and if anything, this one was even better. I'm sure we'll be returning to your site for future purchases. Thanks again for your prompt service." -- Tom J. McConnell, Ph.D.
Estes Interceptor-E Rocket Kit — $42.79
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue. Wax Paper. Plastic Model Cement. Finishing Supplies like sanding sealer, paint and sandpaper (200 and 400 grit) and a sanding block.
Quasar One Defcon 1 — $24.99
Wood Glue. Scissors. Pencil. Ruler. Masking Tape. Hobby Knife. Finishing Supplies like paint and sandpaper, paint brushes.
E" Launch Pad — $28.13
A. First, you'd need to swap out the aluminum rod with one made of steel . Aluminum is good for lightweight rockets, but you'll get too much whip of the model if the wind is breezy. Second, you would need to put a block of wood under the middle of the pad to prevent it from flexing under the weight of a heavier rocket. You should also make sure the rocket is higher on the launch rod, so the flame doesn't pound the blast deflector too hard. Otherwise, it may flex and snap off the plastic legs. Most...
Quasar One Storm Chaser Rocket Kit — $20.99
Wood Glue. Scissors. Pencil. Ruler. Masking Tape. Hobby Knife. Finishing Supplies like paint and sandpaper, paint brushes.
Apogee Quasar One Storm Chaser Rocket Kit — $20.99
Wood Glue. Scissors. Pencil. Ruler. Masking Tape. Hobby Knife. Finishing Supplies like paint and sandpaper, paint brushes.
Red River Red Shift — $25.00
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Quest Recovery Wadding — $6.41
Whenever you launch a rocket, you need flame-resistant wadding inside to protect the parachute or streamer from being melted into a plastic wad. What wadding does is trap the burning particles from the rocket engine's ejection charge so they can't reach the parachute. It also provides some insulation for the parachute, so it is less likely to melt from the tremendous heat of the ejection charge.
Estes Interceptor-E Rocket Kit — $46.53
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue. Wax Paper. Plastic Model Cement. Finishing Supplies like sanding sealer, paint and sandpaper (200 and 400 grit) and a sanding block.
E" Launch Pad — $26.74
A. First, you'd need to swap out the aluminum rod with one made of steel . Aluminum is good for lightweight rockets, but you'll get too much whip of the model if the wind is breezy. Second, you would need to put a block of wood under the middle of the pad to prevent it from flexing under the weight of a heavier rocket. You should also make sure the rocket is higher on the launch rod, so the flame doesn't pound the blast deflector too hard. Otherwise, it may flex and snap off the plastic legs. Most...
Red River U.S.S. Prometheus — $19.00
Wood Glue. CyA Glue (super glue). Scissors. Pencil. Ruler. Masking Tape. Hobby Knife. Sanding Block. LONG cotton swab sticks. Finishing Supplies like paint and sandpaper, paint brushes.
Estes Interceptor-E Rocket Kit — $46.53
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue. Wax Paper. Plastic Model Cement. Finishing Supplies like sanding sealer, paint and sandpaper (200 and 400 grit) and a sanding block.
Rocket Kit — $24.95
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Aerotech Mustang Rocket — $54.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
Aerotech Wart-Hog Rocket — $74.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
Odd'l Break-Away Model Rocket Kit — $17.25
Pencil. Ruler. Scissors. Hobby Knife. Wood Glue or White Glue (or 5-minute epoxy). CA (Super) glue. Finishing Supplies like wood filler, sanding sealer, paint and sandpaper (200 and 400 grit).
Apogee Rockets — $30.00
Wood Glue. Scissors. Pencil. Ruler. Masking Tape. Hobby Knife. Finishing Supplies like paint and sandpaper, paint brushes.
Sky Dynamo — $14.00
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue.
Quest Payloader One Rocket Kit — $13.90
Pencil. White glue or carpenter's wood glue. Masking tape. Hobby knife - (Optional) Used to remove fins from wood sheet. Finishing Supplies like paint and sandpaper.
Wearables — $6.43
Show others that you indeed are a true rocket scientist by wearing this classy lapel pin. Not only is it a statement about your qualifications, but you can use it to show your generosity and appreciation by removing the pin from your jacket, and awarding it to some deserving young rocketeer when they complete a magnificent launch. Can you see it now? They'll be beaming from ear-to-ear from receiving your recognition, and you'll have earned a warm spot in their heart.
E" Launch Pad — $28.13
A. First, you'd need to swap out the aluminum rod with one made of steel . Aluminum is good for lightweight rockets, but you'll get too much whip of the model if the wind is breezy. Second, you would need to put a block of wood under the middle of the pad to prevent it from flexing under the weight of a heavier rocket. You should also make sure the rocket is higher on the launch rod, so the flame doesn't pound the blast deflector too hard. Otherwise, it may flex and snap off the plastic legs. Most...
Parachutes — $7.00
You just got a really cool rocket, and you'd like to upgrade it to use a nylon parachute. But the problem with most nylon chutes is that the material is too thick and too stiff to pack into a small diameter tube. Here are a couple of parachutes that are make from thinner cloth which is also softer than our bigger chutes. They pack really tight, and then easily spring open once they are out of the rocket. They are perfect for your trophy-size rockets they you can't fit anything but a plastic . And...
Aerotech G-Force Rocket — $99.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
Aerotech Cheetah Rocket — $54.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
Aerotech Sumo Rocket — $119.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
Aerotech Arreaux Rocket — $45.95
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
Nozzle Closure — $22.95
The forward closure screws onto the front end of the case. It serves multiple purposes. First, it holds the hot gases of the burning propellant and keeps them from shooting forward into the body of the model rocket. It also holds the special slug of propellant called the "delay grain." Finally, it has a small receptacle at the tip to hold the black-powder ejection charge.The aft closure screws onto the base of the aluminum case. Like the forward closure, it is a bulkhead that holds the hot gases...
Aerotech Mirage Rocket — $82.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
Red River P-Chuter Xtreme — $48.00
Wood Glue. CyA Glue (super glue). Scissors. Pencil. Ruler. Masking Tape. Hobby Knife. Sanding Block. LONG cotton swab sticks. Finishing Supplies like paint and sandpaper, paint brushes.
LOC/Precision Forté High Power Rocket — $73.95
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Dr. Zooch Jupiter C — $24.95
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Apogee Sky Eagle — $10.50
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue. Finishing Supplies like sanding sealer, paint and sandpaper (200 and 400 grit).
Quest Recovery Wadding — $6.41
"Thank you very much for your follow-up emails. Yes, our model rocket arrived without problems and me and my son are in the process of getting it assembled. He's very impressed with the kit and I'm very impressed with your level of service and interest after the sale. Your efforts have definately made an Apogee convert of me. I'll make sure our future rocketry purchases all say 'Apogee' on the invoice. " -- Mike Dwyer
Write Like An Astronaut — $9.99
CAUTION: Rocket Pen is designed for people ages 14 and up. Do not stand directly over launch pad. Rocket Pen shoots straight up when placed on flat surface. Stand back and keep face clear. Never launch Rocket Pen at people or animals. Never alter Rocket Pen in any way.
Modern High Power Rocketry - 2nd Edition — $37.55
Introduction: Welcome to High-Power. 1. High-Power Rocket Motors. 2. Level Once Certification. 3. Level Two Certification. 4. Motor Retention. 5. High-Power Igniters. 6. Ejection Charges. 7. Launching the High-Power Rocket. 8. High-Power Electronics. 9. Altimeter Bays. 10. Deployment and Recovery. 11. Building the Level One Rocket. 12. Building the Level Two Rocket. 13. Clusters and Airstarts. 14. Level Three and Beyond. 15. Building the Level Three Rocket. 16. Building Your First...
Aerotech First Fire Igniters — $12.83
"There are actually a couple of other things that I wanted to order but I don't get paid until Friday. Let me get back with you in a couple of days and I'll get another order together for you. Your customer service is awesome. You have earned my business." -- Blake Goddard
LOC Onyx Rocket Kit — $109.95
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Sky Eagle — $10.50
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue. Finishing Supplies like sanding sealer, paint and sandpaper (200 and 400 grit).
Quest Magnum Sport Loader Kit — $19.25
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue.
LOC Hi-Tech Rocket Kit — $69.95
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Aerotech Interlock Launch Controller — $73.99
Skill Level 3: Average Skills Needed - Assembly is Required. Used to launch up to a G-Engine Size Rocket. Connects to a 12 V car battery. 40 feet of wire, so you can stand far back from the pad when launching rockets. Audible Continuity Check.
Aerotech Barracuda Rocket — $59.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
Aerotech ARCAS Rocket — $83.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
Aerotech Initiator Rocket — $51.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
LOC ISIS Rocket Kit — $76.95
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Aerotech Strong Arm Rocket — $74.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
Aerotech ISQY Tomahawk — $59.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
LOC/Precision V2 High-Power Rocket kit — $99.95
A deployment bag is a device to help ensure that parachute inflates properly and in the correct order. It forces the lines to completely stretch out first, and then the canopy is released so that it can properly inflate. It also minimizes the loads on the suspension lines to prevent tears, and it gives additional protection from the heat of the ejection charges. If you're doing high power rockets, you really need this extra insurance to make your project a success.
Quasar One Sky Needle Rocket Kit — $26.99
Wood Glue. Scissors. Pencil. Ruler. Masking Tape. Hobby Knife. Finishing Supplies like paint and sandpaper, paint brushes.
Reload Spacer System for Big Rocket Motors 29mm Reload Adapter System — $37.44
Want to hold in your rocket engines securely without using tape or other unsightly methods? Then they Aero Pack retention system may be what you're looking for. There is a retainer available for all the common high power tube sizes that we carry (LOC, Blue Tube, and Fiberglass), as well as for the mid and high-power rocket kits on this web site.
Apogee Avion — $10.51
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue. Finishing supplies like sandpaper and spray paint.
Quasar One Sky Needle — $26.99
Wood Glue. Scissors. Pencil. Ruler. Masking Tape. Hobby Knife. Finishing Supplies like paint and sandpaper, paint brushes.
Removable Plastic Rivets — $2.58
These are two-piece rivets. The head is connected to a post that slides through the bottom piece. As it pushed completely together, it separates the fingers on the bottom part. The fingers cannot then be pulled through the hole in the tube/coupler. To remove the rivet, simply pull the head and post completly out of the rivet. The bottom section can then be removed by pulling it straight out. The base may not snap back all the way, but it can be reused again and again.
Lightning Fury — $16.49
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue. Finishing Supplies like sanding sealer, paint and sandpaper (200 and 400 grit).
Sky Dynamo Rocket Kit — $14.00
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue.
Quasar One Iced Up — $13.99
Wood Glue. Scissors. Pencil. Ruler. Masking Tape. Hobby Knife. Finishing Supplies like paint and sandpaper, paint brushes.
Building Skill Level 3 Rockets - DVD — $17.25
This is a two DVD disk set. They works in any DVD player, whether your computer or for your TV.
Aerotech RMS™ Delay Drilling Tool — $21.39
The Aerotech RMS Delay Drilling Tool is used to shorten the delay time of the RMS and RMS+ delays used in the Aerotech reloadable motors. In this way, you can achieve parachute deployment at the perfect time during the flight. Basically, it is used to drill a hole to a pre-determined depth into the delay element (called the delay grain). The deeper the hole, the shorter the ejection delay.
Recovery Wadding To Protect Your Parachute From Melting — $6.41
Whenever you launch a rocket, you need flame-resistant wadding inside to protect the parachute or streamer from being melted into a plastic wad. What wadding does is trap the burning particles from the rocket engine's ejection charge so they can't reach the parachute. It also provides some insulation for the parachute, so it is less likely to melt from the tremendous heat of the ejection charge.
Quest Big Dog Mid power Model Rocket Kit — $48.14
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Pemberton Technologies Bucky Jones Rocket Kit — $90.00
Pencil. Ruler. Masking Tape. Hobby Knife. Dremel tool. Finishing Supplies like paint and sandpaper. Wood Glue or 5-Minute Epoxy.
Sunward Arachnid Rocket Kit — $19.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue. Finishing Supplies like sanding sealer, paint and sandpaper (200 and 400 grit). .
Quest Quad Runner Model Rocket Kit — $48.14
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue.
Aerotech First Fire Igniters First Fire Jr — $11.77
"Tim speaking to your staff always amazes me. They are always so helpful and cheerful! Today I had the pleasure of ordering, and the woman did an outstanding job!! Very helpful!! You guys ROCK!!! Thank you all." -- Don Pfister
Apogee Flat Foot — $19.99
Pencil. Ruler. Scissors. Tape. Hobby Knife. Plastic Model Cement. White glue.
Starlight SS Barracuda — $18.95
Pencil. Ruler. Hobby Knife. Wood Glue. Sand paper.
Ejection Charge Baffle Kits AT/66 (BT-80) — $6.49
Ejection Charge Baffles trap the burning particles spewed forward by the motor, thereby keeping the parachute from becoming singed. They also slow the hot gases down, allowing them time to cool. This is what prevents the chute from melting.
LOC Hi-Tech Rocket Kit — $69.95
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Quest Q2G2 Igniter — $8.55
Low Current, Low Voltage. These igniters are also more forgiving of dying batteries in your launch controller. It only takes a little electricity (120 ma) to set them off. So where other igniters may not ignite, these babies will flare up and get your motors going. Please note that since they are very low current igniters, some controllers intended for "high-power" rockets can set them off during continuity tests. Be sure to hook up an igniter to your system before inserting it into the motor to...
Kraft paper — $2.31
Having Apogee's quality parts to work with is only one piece of the puzzle in making a stunning rocket. Now you need techniques and skills for assembling them into an eye-popping model. Our video books can show you the procedures and methods the experts use when they build rockets. Don't you want your rockets to be the center of attention?
Apogee Dr. Zooch Jupiter C — $24.95
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Shenzhou (Scale Model) — $15.47
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue. Plastic Model Cement. Thin CA (super) glue.
Aerotech Mantis Launch Pad Kit — $111.99
Third, the pad does require a large storage area. The legs and the rod are removable, but the plastic portion is rather bulky. Once assembled, the plastic portion does not fit back into the box it came in. If you are not going to use the pad as a display base for your great-looking rockets, you may need to find a suitable storage box for it. Another alternative is to look around in your garage for one of those folding lawn-chair sacks. It is about the same size and will hold this pad and its legs...
Sky East Wind Rocket Kit — $7.57
Pencil. Ruler. Scissors. Transparent (clear) Tape. Hobby Knife. Plastic Model Cement.
Quest Quad Runner — $48.14
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue.
Quest Future Launch Vehicle Rocket Kit — $24.60
Pencil. White glue or carpenter's wood glue. Permanent spray glue. Masking tape. Hobby knife - (Optional) Used to remove fins from wood sheet. Finishing Supplies like paint and sandpaper.
Pemberton Technologies Little Bucky Jones Rocket Kit — $30.00
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Aerotech Mantis Launch Pad Kit — $116.99
Third, the pad does require a large storage area. The legs and the rod are removable, but the plastic portion is rather bulky. Once assembled, the plastic portion does not fit back into the box it came in. If you are not going to use the pad as a display base for your great-looking rockets, you may need to find a suitable storage box for it. Another alternative is to look around in your garage for one of those folding lawn-chair sacks. It is about the same size and will hold this pad and its legs...
Quest MLAS Rocket Kit — $37.44
Pencil. Ruler. Hobby Knife. Paint Brush. Wood Glue. Sand paper (220 or 320 and 400 Grit). Masking Tape. Water-based Carpenter's Wood Filler (Elmer's works fine). Foam-safe spray paint. Krylon makes a brand called H2O paint. It is a bit more expensive than their regular paint, but it can be sprayed on foam without melting it.
Quest Tomahawk Sea-Launch Cruise Missile — $19.25
Pencil. Ruler. Masking Tape. Hobby Knife. Razor Saw. Finishing Supplies like paint and sandpaper.
Dr. Zooch Mercury Redstone — $24.95
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.
Kraft paper — $2.31
"I really appreciate the extra steps you and everyone at Apogee takes in customer service. It's the reason I keep coming back to Apogee for my rocketry supplies. Also, no other vendor has a website as packed with rocketry information as you do. Your website is one of the reasons why I joined NAR and got back into model rocketry after being away from it for 40+ years. I'm also pleased to see you gradually moving into hi-power rocketry. Keep up the good work!" -- Frank Panek
Long March Three — $14.00
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue.
are NOT included — $72.08
These are an easy-to-ignite black-powder propellant rocket engine. They are all the standard 18mm diameter motors that are 2-3/4 inches long - which are the same size as the "regular-size" Estes rocket engines. The big difference is that they are lower in price. They will loft your rockets just as high, and just as fast as the Estes motors. Since they are black powder, they produce lots of thick, puffy grey smoke - making them easy to follow up into the air.
Quest Courier Rocket Kit — $18.18
Pencil. White Glue or Wood glue. Masking Tape. Hobby Knife. Finishing Supplies like paint and sandpaper.
Flat Foot — $14.99
Pencil. Ruler. Scissors. Tape. Hobby Knife. Plastic Model Cement. White glue.
Centering Ring 29-54 — $4.75
Having Apogee's quality parts to work with is only one piece of the puzzle in making a stunning rocket. Now you need techniques and skills for assembling them into an eye-popping model. Our video books can show you the procedures and methods the experts use when they build rockets. Don't you want your rockets to be the center of attention?
Centering Ring 38-54 — $4.75
Having Apogee's quality parts to work with is only one piece of the puzzle in making a stunning rocket. Now you need techniques and skills for assembling them into an eye-popping model. Our video books can show you the procedures and methods the experts use when they build rockets. Don't you want your rockets to be the center of attention?
Cosmodrome Black Brant II Rocket — $65.40
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or White Glue.
Apogee Aerotech Wart-Hog Rocket — $72.99
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. 5-Minute Epoxy or super glue. Wood Glue.
Cosmodrome Nike Apache Rocket — $60.00
Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue. Super Glue (CyA adhesive).
