Engine - CY46 — $255.00
Chung Yang 46cc RC style engine w/clutch. Same as Go-Ped GP460RS engine. 42mm bore by 33mm stroke.
1/4npt Brass Female T — $6.00
1/4"npt brass female T.
Magura Standard Clutch Lever — $19.95
Standard length clutch lever for Magura Hymec hydraulic clutch kits.
6 Hose Clamp — $2.00
Stainless #6 hose clamp for 1/2 inch waterline. Clamping range 5/16 to 7/8 inch.
Fuel Line 1/8 — $2.00
40.2/47cc Reed Engine - 43/49cc Engine - Bigfoot - G.O.X-Ped - G230RC - G23LH - G260RC - G2D - G43L-D - Geo-Bigfoot - Geo-Sport - Go-Quad - GSR Sport - GSR25 - GSR40 - GSR40TSi - GZ25N - Liquimatic - Martin Mini - Martin Monster - Midbike/Superbike - Pocketbike - Sport - Super Bigfoot - Super Go-Quad - Super X-Ped - X-Ped
1/4npt Brass Plug — $2.00
1/4"npt brass plug.
Bearing - 6202-2rs — $2.95
Shipping weight is 0.06 lbs. Bearing dimensions: 15mm ID by 35mm OD
K&N Drycharger - Short — $16.95
K&N Drycharger for 59-2042r and 59-2042rk flame arrestors. These are a must for keeping the flame arrestors from ingesting water.
Bearing - 6202-2rs — $2.95
Shipping weight is 0.06 lbs. Bearing dimensions: 15mm ID by 35mm OD
Chain Guide - CRF50 — $39.95
Heavy duty chain guide for the Honda CRF50 & XR50. Fits both stock and aftermarket swingarms.
Carburetor Idle Screw - CRF50 Keihin PC20 — $9.95
Billet aluminim idle screw for the Keihin PC18 & PC20 & Sheng Wey 20mm carbs. Make adjusting the idle easy, no screw driver required!
Kill Switch - Universal — $11.95
Bigfoot - BladeZ Moby 35cc - BladeZ Moby XL 40cc - G.O.X-Ped - Geo-Bigfoot - Geo-Sport - GSR40 - GSR40TSi - Liquimatic - Martin Mini - Martin Monster - Sport - Sport S25 - X-Ped
Jet Ski Parts - Kawasaki 800 SXR .060 Ltd Base Gasket 31-358016 — $19.95
Fiber w/metal core base gasket for Kawasaki 800 SXR engines. This base gasket is 1.5mm/.060" thick for use with our limited drop domes. This gasket will raise the cylinder .050", increasing the port timing offering better performance. The limited drop domes(sold separately) then drop .050" into the cylinder. This setup is limited class legal.
Spark Plug - CR6HSA — $2.95
Stock replacement spark plug for Honda XR50.
Bearing - 6003-2RS — $3.95
Shipping weight is 0.08 lbs. Bearing dimensions: 17mm ID by 35mm OD
Spark Plug - NGK CMR7A GoPed — $4.50
G.O.X-Ped - Geo-Bigfoot - Geo-Sport - GZ25N - Sport S25
Kick Start Lever - CRF50 — $16.00
Kick start lever for the Honda CRF50, XR50, & CRF70. Also fits most import bikes and engines.
Fuel Line Kit - 47cc Pocket Bike HP Carb — $9.95
Shipping weight is 0.08 lbs. This requires that you drill a 1/4" hole in the bottom of your fuel tank to install the return line. Drill at your own risk!
Clutch Removal Spacer - KLX110 — $2.00
Billet aluminum clutch removal spacer for the KLX110 & DRZ110.
Spark Plug Cap - CRF50 — $6.95
Honda CRF/XR50 - Pitster - SDG - Sikk - SSR - Thumpstar - Vinco
Sprocket - Honda CRF50 Rear — $34.95
CNC billet aluminum rear sprocket for the Honda CRF50 and XR50. Hard anodized in Titanium grey for durability. Style design depends on size.
Dome - Yamaha 701 — $39.95
Billet dome includes compression(OR043) and dome top(OR020) orings. Squish relief is .015" @ 83mm with a 10.5 degree angle.
Tappet Cover - Vented CRF50 — $19.95
This is a vented billet aluminum tappet cover for the Honda CRF and XR 50 engines. It has a built in hose barb that you can connect a 3/8" hose(not supplied) to.
Intake Manifold - GTR CY42 CY46 — $34.95
Billet aluminum intake manifold kit for the CY42, CY46, GP420RS, and GP460RS engines. Replaces the stock plastic one that can easily break. Includes aluminum manifold w/brass pulse fitting, nylon heat spacer, pulse line, gaskets, and hardware.
Spark Plug - NGK BR9ES — $2.50
Kawasaki 1100 - Kawasaki 750 - Kawasaki 800 - Kawasaki 900 - Kawasaki Ultra 150 - Polaris 785 Pro - Sea-Doo 720 - Sea-Doo 800 - Sea-Doo 951 Limited - Yamaha 1100/1200 - Yamaha 701 - Yamaha 760 - Yamaha GP1200R - Yamaha GP800R
HPI Baja 5b 5t 5sc Parts - Billet RC Air Filter 11-1010 — $34.95
Billet aluminum air filter for Walbro WT-603, WT-668 and other Walbro carbs. Features Uni Filter dual foam elements. Fits the HPI Baja 5b and many FG r/c cars. Also fits Go-Peds with RC engines. Fits carbs with a 3/4 inch entry hole and 30.5mm center-to-center bolt pattern. Weighs in at only 3.2 ounces! Includes mounting hardware and gasket.
HPI Baja 5b 5t 5sc Parts - 35mm RC Big Bore Kit 11-212835 — $49.95
Chung Yang 35mm big bore kit, 26.9cc. Kit includes cylinder, piston, ring, clips, and base gasket.
1/8npt Brass Plug — $0.90
1/8"npt brass plug.
Gasket - 49cc Pocket Bike Intake — $2.00
Intake gasket for 43/49cc Chinese engines. On stock application, this gasket goes inbetween the intake manifold and the cylinder. On the ADA Racing Juice Box, 2 are required and they go on either side of the plastic heat spacer inbetween the Juice Box and the cylinder.
K&N Flame Arrestor - Tall — $53.95
K&N gauzless flame arrestor. 4" tall cone with 4-1/2" diameter base by 3" diameter top. Chrome top with embossed K&N logo.
Primary Gear Shaft - KLX110 — $70.00
Primary gear shaft that eliminates the centrifugal clutch on the end of the crankshaft. Use this along with the manual clutch kit.
Fuel Line Kit - 47cc Pocket Bike HP Carb — $9.95
Shipping weight is 0.08 lbs. This requires that you drill a 1/4" hole in the bottom of your fuel tank to install the return line. Drill at your own risk!
Gas Cap - 47cc Pocket Bike — $4.95
Shipping weight is 0.10 lbs. You must remove the one-way valve in the stock gas cap and use it in the billet gas cap. Due to variances in tolerances on these Chinese pocket bikes, this gas cap may not fit all models.
Head Kit - Kawasaki 750 — $269.95
Includes head shell, domes, and orings. Head shell is clear anodized for protection against corrosion. This head is completely sealed by orings, no head gasket required.
Head Shell - Yamaha GP1200R — $235.10
All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined for consistency and performance. Clear anodized for protection against corrosion. This is the head shell only. Includes orings that fit into the grooves in the head shell,mounting hardware, and brass fittings.
Tappet Cover - Vented CRF50 — $19.95
This is a vented billet aluminum tappet cover for the Honda CRF and XR 50 engines. It has a built in hose barb that you can connect a 3/8" hose(not supplied) to.
Head Kit - G270RC — $149.95
Billet head kit for the Zenoah G240RC and G270RC. Features removeable dome for easy compression changes and a 4 bolt girdled head shell for strength. This kit has a 34mm bore size which is standard on the G270RC and it will turn a G240RC into a G270RC. This kit includes a 34mm bore size Zenoah G270RC cylinder that we CNC machine to work with our billet head shell. Also included is the billet head shell, removable dome, .020" copper head gasket, base, intake, and exhaust gaskets, and necessary hardware...
Handlepole Spring Tensioner - Kawasaki 800SXR Billet — $29.95
Kawasaki 800 SX-R handlepole spring tensioner. Includes billet black anodized bracket and stainless hardware.
Head Shell - Yamaha 1100/1200 — $235.10
All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined for consistency and performance. Clear anodized for protection against corrosion. This is the head shell only. Includes orings that fit into the grooves in the head shell and brass fittings. Girdle kit not included.
K&N Flame Arrestor - Short — $50.95
Kawasaki 1100 - Kawasaki 750 - Kawasaki 800 - Kawasaki 900 - Kawasaki Ultra 150 - Polaris 785 Pro - Sea-Doo 720 - Sea-Doo 800 - Sea-Doo 951 Limited - Yamaha 1100/1200 - Yamaha 701 - Yamaha 760 - Yamaha GP1200R - Yamaha GP800R
Billet Engine Cover Kit - KLX110 — $63.96
Includes billet aluminum cam cover, tappet covers, and left side engine case cover. Fits Kawasaki KLX110 and Suzuki DRZ110. Includes stainless mounting hardware and new orings.
Air Filter Kit - 49cc Pocket Bike w/choke — $21.95
Complete air filter kit w/choke for the 49cc midbike. Kit includes chrome air filter & velocity stack w/built-in choke. Velocity stack/choke has 3/4 inch diameter thru hole.
Air Filter Kit - 47cc Pocket Bike — $12.95
Shipping weight is 0.42 lbs. Fits stock slide carb only. Will not fit models that have a frame bar between the air filter and the rear wheel.
Jet Ski Parts - Kawasaki 800 SXR .060 Ltd Base Gasket 31-358016 — $19.95
Fiber w/metal core base gasket for Kawasaki 800 SXR engines. This base gasket is 1.5mm/.060" thick for use with our limited drop domes. This gasket will raise the cylinder .050", increasing the port timing offering better performance. The limited drop domes(sold separately) then drop .050" into the cylinder. This setup is limited class legal.
Billet Engine Cover Kit - KLX110 — $63.96
Includes billet aluminum cam cover, tappet covers, and left side engine case cover. Fits Kawasaki KLX110 and Suzuki DRZ110. Includes stainless mounting hardware and new orings.
Billet Engine Cover Kit - Honda CRF50 — $99.95
Includes billet aluminum cam cover, top head cover, side head cover, tappet covers, oil dipstick. Fits Honda CRF50 and XR50 engine, stock and big valve heads. Also fits some import motors.
HPI Baja 5b 5t 5sc Parts - 34mm F270 Cylinder 11-214634 — $49.95
Head Kit - G230RC CY23RC — $159.95
Complete head kit for stock bore G230RC and CY23RC engines. Kit includes billet head shell, machined Zenoah cylinder, hp piston kit, dome, spark plug, gaskets, and hardware.
Brass Fitting - 1/4npt x 3/8 — $2.00
1/4npt x 3/8 brass hose barb fitting. For use with 3/8 inch id waterline.
Spark Plug - CMR7H — $4.50
NGK CMR7H spark plug. Replacement spark plug for G230RC/G260RC/HE23HP/HE26HP engines. Also works with ADA Racing billet head kits for scooter and pocketbikes.
Spark Plug - NGK BR8ES — $2.50
Kawasaki 1100 - Kawasaki 750 - Kawasaki 800 - Kawasaki 900 - Kawasaki Ultra 150 - Polaris 785 Pro - Sea-Doo 720 - Sea-Doo 800 - Sea-Doo 951 Limited - Yamaha 1100/1200 - Yamaha 701 - Yamaha 760 - Yamaha GP1200R - Yamaha GP800R
Engine Cover - KLX/DRZ110 Billet — $29.95
Left side billet engine cover for your Kawasaki KLX110 or Suzuki DLZ110. Includes stainless allen bolts.
Carb Top - CRF50 — $9.95
Billet aluminum anodized carb top for the stock Honda CRF50 carburetor. Use with aftermarket throttle cable.
Bearing - CRF50 Tapered Steering — $39.95
Tapered steering head bearing set for the Honda CRF50 & XR50.
Gasket Set - 47cc Pocket Bike — $4.95
Gasket set for the 47cc Chinese Pocket Bikes. Gasket set includes: 1 - base gasket, 2 - case gaskets, 1 - exhaust gasket, 1 - carb to intake manifold gasket, 1 - intake manifold to reed cage gasket, 1 - reed cage to case gasket.
Gasket - Base, G2D — $2.00
Base(cylinder to case) gasket for Zenoah G2D.
Dome - G23LH/G230RC/G2D — $14.95
Shipping weight is 0.06 lbs. Select size based on fuel octane.
Air Filter - XR50/CRF50 26mm Carb — $10.00
Honda CRF/XR50 - Kawasaki KLX/DRZ110 - Pitster - SDG - Sikk - SSR - Thumpstar - Vinco
Recoil Starter - G23LH — $21.95
Replacement recoil pull starter fits stock Zenoah G23LH and Chung Yang CY23ZR engines.
Brake Lever & Perch Assembly - XR50/CRF50 — $9.95
Shipping weight is 0.30 lbs. Does not fit stock CRF/XR50 handlebars.
Head Kit - Kawasaki 1100 — $354.95
Includes head shell, domes, and orings. Head shell is clear anodized for protection against corrosion. This head is completely sealed by orings, no head gasket required.
Parts - 49cc Pocket Bike Stalker Exhaust pbex-st49 — $89.95
Stalker exhaust for the 43/49cc midbike/superbikes. Features a baffled interior design for a lower noise output, while still offering exceptional performance. Includes billet canister, spacer, gaskets, and 6x65mm mounting hardware.
Drive Puller — $19.95
Bigfoot - G.O.X-Ped - G230RC - G23LH - G260RC - G2D - Geo-Bigfoot - Geo-Sport - Go-Quad - Liquimatic - Martin Mini - Martin Monster - Sport - Super Bigfoot - Super Go-Quad - Super X-Ped - X-Ped
Gasket - Crankcase, Geo/GZ25N — $2.00
G.O.X-Ped - Geo-Bigfoot - Geo-Sport - Go-Quad 25 - GSR Sport - GSR25 - GZ25N - Sport S25
Drive Puller — $19.95
Bigfoot - G.O.X-Ped - G230RC - G23LH - G260RC - G2D - Geo-Bigfoot - Geo-Sport - Go-Quad - Liquimatic - Martin Mini - Martin Monster - Sport - Super Bigfoot - Super Go-Quad - Super X-Ped - X-Ped
Brake Caliper - Go-Ped Maddog — $28.56
Bigfoot - Geo-Bigfoot - GSR29R - GSR40 - GSR40TSi - GTR 46 Trail Ripper - Pro 60 - Super Bigfoot - Super GSR46R - Trail Ripper Quad
Gasket - 47cc Billet Intake — $2.00
Gasket for use with ADA Racing billet intake manifolds for the 47cc pocketbike. This gasket goes inbetween the billet intake manifold and the reed cage.
Chain Tensioner - GSR40 Go-Ped — $69.95
Spring-loaded wheel tensioner with adjustable slack stop. Quiet and efficient! May not work with aftermarket pipes that mount to the stock chain mount. Modification may be required to the pipe mounting bracket.
Rubber Damper - Kawasaki Style — $34.95
High quality aftermarket rubber dampner for Kawasaki 750/800 style couplers. This is 1.5mm thinner than the O.E. Kawasaki damper.
Jet Ski Parts - Yamaha 701/760 Superjet Billet Head O-Ring Kit orkity701 — $19.95
This is a complete o-ring kit for your ADA billet head. Fits the girdled and non-girdled heads.
Sprocket - 47cc Pocket Bike 3rd Bearing — $5.00
Front 3rd bearing support sprocket for your 40.2/47cc pocket bike. Pinion gear with 8mm-1.0 fine threads. Manufactured in-house from chromoly, heat treated, then black oxide coated. These can also be used without a 3rd bearing support as just a replacement for the stock sprocket.
CRF50 & KLX110 Parts - XR50/CRF50 Footpeg Mount 51-505100 — $39.95
Heavy duty chromoly footpeg mount, powder coated black, for the Honda CRF50 and XR50. Fits stock and aftermarket footpegs.
Carb Cable Bracket - 47cc Pocket Bike — $2.95
Hp carb throttle cable bracket for 47cc Chinese Pocket Bike. Use with WA/WT style hp carbs.
Air Filter Kit - 49cc Pocketbike — $15.95
Complete air filter kit for the 49cc midbike. Kit includes chrome air filter and billet velocity stack with .700\\\" diameter thru hole.
Billet Wheel - Solid Rimlock Go-Quad — $74.95
Solid non-spoked bead-lock billet wheel. Available in polished only. Bead-lock ring extends up the side of the tire for added support and to prevent the tire from coming off the rim. All wheels are sold individually without tire.
Billet Wheel - Prowler — $54.95
Trick looking 6 spoke billet aluminum wheel. This is also the front match for the spoked bead-lock billet wheel. Stepped aluminum bearing spacers to prevent bearing lock from over tightening. All wheels are sold individually without tire.
Intake Manifold - KLX110 Race Head — $56.00
Intake manifold kit for the KLX110 & DRZ110 with a big valve race head. For use with Mikuni VM26, 26mm Oko, and other carbs with a 33mm mounting flange.
Flywheel - Chung Yang RC — $21.95
Chung Yang replacement flywheel for RC engines. Fits Chung Yang CY23RC, CY26RC, CY27RC, CY29RC, GP290, and GPL290 engines. Also fits Zenoah G230RC, G240RC, G260RC, G270RC, and G290RC engines. HPI Racing Part # 15430.
Footpeg Mount - XR50/CRF50 — $39.95
Heavy duty chromoly footpeg mount, powder coated black, for the Honda CRF50 and XR50. Fits stock and aftermarket footpegs.
Engine Lockdown - Bigfoot — $29.95
Engine lock-down linkage for new style Bigfoot Go-Ped. Fits yellow Bigfoot frame only(same as Super Bigfoot). Also a replacement for the stock Super Bigfoot lock-down. Mounts to stock frame and stock engine mount. If used with ADA 3rd bearing, must also use SBF lock-out adaptor. Includes linkage and mounting bolts.
Intake Adaptor - 49cc Pocket Bike Walbro WT — $9.95
Billet aluminum intake adaptor for installing a Walbro WT/WA style carb onto the stock manifold. The adaptor aligns the pulse hole preventing an air leak. Includes required gaskets.
Crankshaft - Zenoah RC — $69.95
Bigfoot - G230RC - G23LH - G260RC - Go-Quad - Go-Quad 30 - GP290RS - GSR29R - Liquimatic - R270 / CY27RC - Sport - Super Bigfoot - Super Go-Quad - Super X-Ped - X-Ped
Flywheel - Chung Yang RC — $21.95
Chung Yang replacement flywheel for RC engines. Fits Chung Yang CY23RC, CY26RC, CY27RC, CY29RC, GP290, and GPL290 engines. Also fits Zenoah G230RC, G240RC, G260RC, G270RC, and G290RC engines. HPI Racing Part # 15430.
Bearing - Crankshaft — $8.95
High quality Japanese 6001-2rs crankshaft bearing. You must remove the rubber seal from the bearing on all sides, except for the side facing the drive spindle.
O-Ring Kit - Yamaha 701/760 Superjet Billet Head — $19.95
This is a complete o-ring kit for your ADA billet head. Fits the girdled and non-girdled heads.
Rim - 10 inch CRF50 Red Baron — $66.45
Red Baron heavy duty 10 inch aluminum rim for the Honda CRF50 & XR50.
Parts - Yamaha Super Jet Drive Coupler Set 34-7001 — $69.95
Billet aluminum drive coupler set for the Yamaha Super Jet and Wave Blaster. Uses the Kawasaki 750/800 rubber damper(not included).
Parts - Yamaha Super Jet Drive Coupler Set 34-7001 — $69.95
Billet aluminum drive coupler set for the Yamaha Super Jet and Wave Blaster. Uses the Kawasaki 750/800 rubber damper(not included).
Case Saver - Go-Ped GTR40 CY42 — $34.95
Billet engine case protection brace for the Go-Ped Trail Ripper. It mounts to the bottom of the CY42, CY46, GP420RS, and GP460RS engines to help prevent costly damage to the engine cases in the event of a crash. Installs in minutes with the supplied hardware. The GTR40 case brace is an absolute must for aggressive offroad riding.
Air Filter Kit - 49cc Pocket Bike w/choke — $21.95
Complete air filter kit w/choke for the 49cc midbike. Kit includes chrome air filter & velocity stack w/built-in choke. Velocity stack/choke has 3/4 inch diameter thru hole.
Exhaust - Stalker LH/RC — $79.95
Billet aluminum packed and baffled for noise reduction. Installs without disassembly. Finned for maximum heat dissipation. 700-1000rpm increase over stock G23LH exhaust. Increase low & midrange power. Unique muffled sound at low rpm. Eliminates almost all high pitch crackling noise when decelerating. Not much louder than a stock exhaust connected thru the frame. Much quieter than tuned pipe or modified canister. Includes stainless allen mounting bolts. The Stalker does NOT fit under the stock plastic...
Jet Ski Parts - Kawasaki Style Rubber Damper 31-701000 — $34.95
High quality aftermarket rubber dampner for Kawasaki 750/800 style couplers. This is 1.5mm thinner than the O.E. Kawasaki damper.
Gas Cap - 49cc Pocket Bike — $4.95
Shipping weight is 0.10 lbs. You must remove the one-way valve in the stock gas cap and use it in the billet gas cap. Due to variances in tolerances on these Chinese pocket bikes, this gas cap may not fit all models.
Dome - Sea Doo 951 — $39.95
Billet dome includes compression(OR044) and dome top(OR020) orings. Squish relief is 0 at 89mm with a 12.5 degree angle.
Head Kit - Yamaha Banshee Billet — $249.95
Unique 1 piece head shell design, uses stock studs. Completely o'ringed, no head gasket. Includes stainless acorn nuts, washers, & o'ring washers. Finned domes for improved cooling. Increased cooling capacity. 90 degree elbow on intake side allows for boost bottles. Clear anodized for protection against corrosion.
Parts - CY F270 4-Bolt Crankcase 11-224200 — $49.95
CY F230 & F270 4-bolt crankcase assembly. Includes bearings and seals installed. Also includes crankcase gasket.
Gasket - Carb, Geo/GZ25N — $2.00
Shipping weight is 0.01 lbs. Fits Geo model Go-Peds. This is a paper gasket, not rubber like the stock one.
Head Shell - Sea Doo 951 — $190.05
All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined for consistency and performance. Clear anodized for protection against corrosion. This is the head shell only. Includes orings that fit into the grooves in the head shell and brass fittings.
Gasket - Crankcase, G2D — $2.00
Crankcase gasket for Zenoah G2D.
Head Kit - Sea Doo 951 — $269.95
Includes head shell, domes, and orings. Head shell is clear anodized for protection against corrosion. This head is completely sealed by orings, no head gasket required. Water routing is the same as stock.
