|
Drive System: Single Speed Gear Box. Seat Included: No. Engine: 52cc 2HP 2-Stroke. Top Speed: 25 mph (weight dependant). Brakes: Front & Rear Disc. Tires/Front: 10 inch Pneumatic Knobby Tire. Tires/Rear: 10 inch Pneumatic Knobby Tire. Max load: 265 lbs. Max Range: 20 miles per tank. Carton Size: 46x17x19 inches 71lbs. Product Size: Standing 29x24x50in, Folded 36x24x18in. Net Weight: 53 lbs. Gross Weight 58 lbs. Warranty: 90 Days, Parts Replacement.
|
|
|
Engine: Active 40cc. Net Power (kW)r: 1.5kW. Top Speed: Up to 35mph. Range: 20Miles. HP (Output): 2hp. Carb Compliant: No. Tires: 10inch Pneumatic Tires with Aluminum Rims. Clutch: Primary Centrifugal Clutch. Drive: Unique Puzey 2-Speed Multi-Belt drive system. Brakes: Front and Rear Disc Brakes PLUS Aluminum Brake Levers. Handlebars: Height and Position adjustable MX Handlebars. Construction/Components Steel Sub-Frame balance of components. Aluminum B51 and Forged components. Billet...
|
|
|
Drive System: 2 Speed Gear Box (Thumb shifter). Seat Included: Yes, Quick Release. Engine: 52cc 2HP 2-Stroke. Top Speed: 35 mph (weight dependant). Brakes: Front & Rear Disc. Tires/Front: 10 inch Pneumatic Knobby Tire. Tires/Rear: 10 inch Pneumatic Knobby Tire. Max load: 265 lbs. Max Range: 20 miles per tank. Carton Size: 46x17x19 inches 71lbs. Product Size: Standing 29x24x50in, Folded 36x24x18in. Net Weight: 53 lbs. Gross Weight 58 lbs. Warranty: 90 Days, Parts Replacement.
|
|
|
Cutting through the clutter of cheap, comes the superior range of Evo Powerboards from Puzey Design. Through state-of-the-art design and manufacturing techniques, the new generation of Evo Powerboards have taken a technological leap and are loaded with innovative features that make all other brands of scooters seem obsolete.
|
|
|
This scrub board fits the Evo 2, 2X, and SPX. If you don't have the scrub board bolts (longer, special bolts) you need to add them on as an option below.
|
|
|
This set contains two small, and one large belts that will rebuild the gearbox or an Evo2 or an Evo 2X. These will not work on an SPX.
|
|
|
This is the gas lever for an Evo 2, 2X, or SPX. Original equipment for your gas scooter.
|
|
|
|
|
|
This is the stock 17 tooth drive sprocket that fits both the Evo 2 an 2X Scooters.
|
|
|
This sprocket is for the Evo 2 and 2X scooters. It will give you an increase in top speed without dramatically reducing your ability to climb hills. This is a good choice for those who want a bit more speed, but are not ready to move up to a power pipe.
|
|
|
Evo 2,2X Clutch Pressure Plates (3) - Gas Scooters, Electric Scooters, and Scooter Part Sales
Evo Part Number 3EVO20704A Pressure Plates. Come three to a pack. For Evo 2, 2X These are the smooth plates that go between the built up clutch plates (two) which are part number 3EVO20765A. To rebuild a slipping clutch, it would make more sense to replace the two 3EVO20765A part first.
|
|
|
|
|
|
This is the small sprocket that drives the Evo R. (it is NOT the big sprocket on the rear wheel)
|
|
|
|
|
|
This is the front rim for an Evo 2, 2X, or SPX. It does not include the tire or tube, but does include the four bolts that hold the rim halves together.
|
|
|
This is the rear pulley found on the back wheel of a Evo 2 or 2X. It has 86 teeth is part number 3evo20820A and drawing reference B3-4
|
|
|
This is the short, fat set screw that holds the centrifugal clutch bell on to the gearbox. It has nothing to do with the clutch that engages second gear on the scooter, but is rather the clutch that engages with the engine, when the engine spins up. It is Evo Part Number 3CO408020 and is found on diagram C4-10.
|
|
|
|
|
|
This is a modified Walbro carb that will fit your Evo 2. Very limited supply. Has been pre-tuned. First thing you will notice when comparing to your old carb is the size of the venturi. It's huge. More air, more fuel, more power. Will only fit your Evo 2 40cc, will not fit a 2X 50cc.
|
|
|
This is an Evo Two speed transmission that fits either an Evo 2 or An Evo 2x. It will not fit the SPX.
|
|
|
|
|
|
This is the toothed aluminum gear for the second gear clutch. It does not come with any pressure plates, only the part C8-6 Evo20732A
|
|
|
|
|
|
|
|