|
Painter's Touch Latex Primer
Rust-Oleum Painters Touch primer blocks stains, discolorations and irregularities for a smoother, more uniform paint finish. Apply to bare or painted wood, metal, plaster, masonry, or unglazed ceramic. Increases adhesion and durability of finish coat. Pro
|
|
|
EndCuts is a revolutionary coating & applicator intended to be applied to the end cuts of pre-primed exterior & interior lumber and siding. EndCuts seals and protects the end cuts of siding and trim from water penetration. It is recommended for all types of lumber to ensure your warranties are not voided, which are typically dependent on sealing the cuts end of lumber.
|
|
|
Weatherbeater exterior latex primer improves adhesion, durability and mildew resistance of the top coat. Drys in 2 hours. Cleans up with soap and water.
|
|
|
A concentrated latex primer/sealer that seals porous substrates. Enhances bond of level quick self-leveling underlayment and other cementitious toppings. Use as a primer/sealer over concrete, cement backer board, ceramic tile, brick, pavers, terrazo, marb
|
|
|
LEVEL QUIK LATEX PRIMER/. SEALER. *Gallon. *Prepares surfaces for. application of Level Quik. (Ace# 1201938). *Seals porous surfaces. *Bottle.
|
|
|
Do it Best Premium Latex Primer Premium latex primer increases paint adhesion. Blocks stains and fills in irregularities in surface. Apply at least 1 coat of primer to wood and metal before painting. Fast drying and ideal for wood, metal, and crafts. Use indoors or outdoors.NOTE:Some items listed are banned in VOC restricted areas. Refer to the banned Item cross reference list on mydoitbest.com located on the paint product page.No. 2231: Quart covers 100 sq. ft. 791393 dn Brand new in the origi
|
|
|
- Coverage: 3 coats for an area of 16 square feet. (At least two coats are needed to provide enough magnetic attraction. Three coats is recommended)
|
|
|
Latex-iteĀ® Oil Spot Primer is an important first step in preparing your driveway. Once you've thoroughly cleaned the driveway it's time to prepare the oil and gas spots. If you don't treat them properly, the spots will bleed through your newly sealed driveway and the stains will be back! Oil Spot Primer will seal over the oil and gas spots and will provide a strong bond between the driveway and the new sealer.
|
|
|
Masterchem 220000, Kilz 2, 5 Gallon, Low VOC , Fast Dry Water Based White Pigmented Primer Sealer/Stain Killer, Very Low Odor, May Be Used On Interior Or Exterior Surfaces, Holds Back Most Stains, Can Be Re-Coated Quickly & Allows For Easy Clean Up With Warm Soapy Water, VOC Compliant, Replaces True Value #838-034 For Members In The State Of California.
|
|
|
57-4517-01 2g Int Latex Primer
Primes & seals wood, masonry, and sheetrock. Interior primer / sealer. SIZE:2 Gal. COLOR:White. Weight: 22.00 lb. UPC: 042397551062. Manufacturer Part No: 57-4517-01-14.
|
|
|
Motsenbocker's Lift Off& No. 5 Latex Paint Remover (413-01) - 6 Pack
|
|
|
Krylon Commercial Coatings Exterior Latex Primer
Recommended Uses: Can be applied to exterior wood, plywood, masonry, cement, composition panels and other exterior surfaces.
|
|
|
Primes-seals and protects. Increases paint adhesion. Smoothes uneven surfaces. Ensures true paint color is achieved.
|
|
|
EnviroBond is an acrylic latex bonding agent which is applied over new concrete prior to application of surface coatings such as EnviroFill, and EnviroCoat. It is not necessary for previously painted concrete or asphalt.
|
|
|
LevelQuik Concentrated Latex Primer
A concentrated latex primer/sealer that seals porous substrates. Enhances bond of level quick self-leveling underlayment and other cementitious toppings. Use as a primer/sealer over concrete, cement backer board, ceramic tile, brick, pavers, terrazo, marble, or plywood. Not recommended over hardwood or parquet floors, existing vinyl, sheet goods, plastic, or metal surfaces. Apply above temperature of 45 F. 1 gallon covers approximately 300 to 500 sq. ft. depending on porosity of substrate. 1 gallon...
|
|
|
Premium Latex Interior Drywall Primer. Formulated with premium DuPont resins that combines many of the qualities desired in a primer: high hiding, excellent adhesion, blister resistance, quick dry, spatterproof and minimal odor with excellent flow and leveling. Use on interior new or previously painted wood, plywood, drywall, ceiling tile, and cured plaster. Formulated with mildewcides to resist mildew.
|
|
|
Fast drying For drywall, sheetrock and masonry surfaces 2 Gallon
|
|
|
Easy Living primer seals new or previously painted surfaces, promotes adhesion, improves the appearance of the top coat and is fast drying.
|
|
|
Tintable primer to be used under accent colors topcoat to provide enhanced and uniform topcoat coverage.
|
|
|
- W35W00716-20 Do it Best Latex Exterior Primer
Our finest exterior latex primer for use on bare or previously painted wood, plywood siding, galvanized and aluminum metal, vinyl siding, cement composition, stucco, masonry, and block surfaces. Helps prevent cracking and checking of exterior plywood. Its
|
|
|
EXTERIOR LATEX PRIMER WHITE PROFESSIONAL (Gallon)
Exterior Latex Primer is a specially formulated undercoat for use on wood, masonry, brick and metal. Exterior Latex Primer provides an excellent base for latex, acrylic, and alkyd house paints. This product provides the important first step for a long lasting paint system that is blister and peel resistant.
|
|
|
RUST STOP LATEX PRIMER. *Interior/exterior. *For metal substrates only. *Excellent adhesion. *Quickly drying - same day. topcoat. *Seals and protects. *Flash/early rust resistant. *Can be topcoated with latex. or oil. *Red. *Gallon. *Gallon.
|
|
|
Use on exterior siding, trim, doors and shutters. Can be used under latex and oil paints. Allow 2 hours before recoating.
|
|
|
Krylon H20 White Primer H20 Latex Aerosol Spray Paint ~ Item Number: KRY 2614
|
|
|
VOC KilzĀ® 2 Latex Primer And Sealer An interior and exterior water-base white pigmented primer for use on drywall, plaster, masonry, aluminum, painted metal, steel siding wood, and glossy surfaces. Blocks out most stains including asphalt, water, rust, cedar, pine, ink, pencil, felt marker and light smoke stains. Some stains may require 2 coats and extremely water sensitive stains should be coated with original Kilz. For maximum stain blocking results allow Kilz 2 to cure 4 hours before topcoating...
|
|