166 results for "phono preamplifier" between $25.00 and $3,000.00

In the age of the MP3, it can be easy to forget that a turntable signal needs a little help before it reaches a mixer or home stereo if its going to be heard. Thanks to the Behringer MicroPHONO PP400 phono preamp, your turntable will get the boost it needs to bring your vinyl to life.

What you need when your receiver has no phono input. The Pro-Ject Phono Box turntable preamplifier is designed to connect turntables to receivers. With simplicity of design and premium components, the Pro-Ject Phone Box's performance outweighs both its size and its price. The turntable preamp easily switches between MM and MC cartridges using internal jumpers. Dual mono design. Class A components and low-noise integrated circuits throughout the entire circuit path. Features Turntable preamp designed...

SM Pro Audio XP200 Phono Preamplifier The SM Pro Audio XP200 Phono Preamplifier is a portable stand-alone phono preamplifier designed to convert any turntables audio output to a suitable line level signal for recording or playback. With an adjustable preamplifier gain control and perfectly designed RIAA EQ, the XP200 is one of the only phono preamlifiers on the market that can accept both moving coil (MC) and moving magnet (MM) cartridges. The adjustable gain allows for both low and hot input...

Pyle Pro PP999 Phono Preamplifier Pyle Pro's PP999 connects to any turntable output to bring the phono level up to line level. Includes a 12V DC adapter. One year manufacturer's warranty. Specifications: * Reference voltage: 1V * Load impedance: 10k ohms * T.H.D.: 0.08 for 1 kHz 3 mV input * Output level: 2V * Frequency response: 20 Hz - 20 kHz ±2dB * S/N ratio (with A-WTD): 70 dB * Input sensitivity(PHONO): 3 mV * Impedance: 50k ohms * Dimensions: 3.54" W x 2.13" H x 1.02" D.

The A.R.T. DJ PRE II (formerly named the “Phono MicroPRE”) acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp’s gain for a wide range of input sources. The built-in low noise phono preamp...

The VK-P5 exemplifies Balanced Audio Technology's purist approach to circuit design. Its architecture employs ten tubes in a balanced zero-feedback topology. At the heart of the VK-P5 is an innovative Flying RIAA™ network that brings the benefits of fully differential operation to this critical equalization stage while minimizing circuit complexity. Energy reserves in the VK-P5 exceed those found in competing products by an order of magnitude. By any measure of this specification, this phono stages...

Creek OBH-15 Phono Preamp Creek Audio has always been aware of the benefits of vinyl – that is why the company continues to provide a number of Phono stage options. The most recent addition to the Creek range is the OBH-15, combining moving magnet and moving coil Phono pre-amplifiers, into one diminutive chassis. Seriously impressive and offering audiophile performance, the new OBH-15 will augment any system. The OBH-15 Phono pre-amp can now drive longer cables, due to its low output impedance...

It has long been realised that amplifying the tiny signal from phono cartridges is one of the hardest jobs in electronics. Designer Tim de Paravicini has been devising elegant and efficient solutions to the problem over several decades, and the 324 represents the summary of his thinking. A fully transistorised product, it draws heavily on his acclaimed '312 Control Centre' preamplifier in its circuitry but adds flexibility with switchable input impedance for both moving coil (MC) and moving magnet...

Many of today's stereo and AV amplifiers and receivers have either eliminated the phonograph input altogether, or included a low cost - and low performance - circuit for attaching your turntable. The PP 2 offers superb performance in a clean and simple package for a very reasonable cost. The NAD PP 2 is a vastly improved successor to the very popular PP 1, arguably the most successful device of its kind.

Input: 47 kΩ on stereo RCA jacks. Input Level: -18 dBV max. Gain: OFF to +55 dB (1 kHz). Output: -10 dBV nominal on stereo RCA jacks. Equalization: RIAA. Frequency Response: 20 to 20 kHz (±0.75 dB referred to RIAA curve). Crosstalk: < -75 dB (1 kHz). Metering: Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output. THD+N: < 0.05% (20 to 20 kHz, 36 dB gain). Noise: < -74 dB (36 dB gain, 1 kHz), < -80 dB (36 dB gain, 1 kHz, “A-weighted”). 24 Vdc power supply current: 30 mA (idle...

The award winning Sonneteer Sedley is now available with a USB connection. Originally designed to cope with both Moving Magnet and Moving Coil type cartridges offering a selection of load matching options to accommodate most of what the market has to offer, now the USB input/output allows the Sedley to be used to back up vinyl recordings onto a computer. It also allows these backed up files to be played back through the Sedley and hence through the hi-fi system.

Phono Input on Gold-Plated RCA Jacks. Line Output on Gold-Plated RCA Jacks. Front-Panel GAIN Trimmer for Each Channel. Dual-LED VU Meter for Each Channel. RIAA Equalization. Turntable Grounding Screw Provided. Advantages:. Gold-Plated Connectors. Adapt Turntable to an Amplifier Line Input. Feed a Turntable into a CD Recorder.

Audio Research is one of the oldest continually operating manufacturers in American audio. The company was founded in 1970 in Minneapolis with one goal in mind: to advance the state-of-the-art in music reproduction. Today, Audio Research remains a performance-oriented company by philosophy and design. New product introductions are driven only by genuine advances in technology and performance -- the HIGH DEFINITION that...

Since newer receivers typically do not include magnetic phono connection, this pre—amplifier is required to connect a turntable to a conventional line level input. It is also necessary if playing LPs through a computer sound card, mixing console, or other professional equipment. In addition to providing the required gain, this unit also adds necessary RIAA equalization to compensate for the industry standard EQ curve utilized on LPs.

The interior is a photo-perfect picture of construction quality and thoughtful layout. Two large toroidal transformers grace the front corners of the chassis, and the power-supply and signal circuit boards are separate and have ample space in between. Jensen transformers made to ARC specs provide moving-coil step-up duty. Changing the cartridge load is made possible by soldering resistors between posts located on the input board. The Reference is set up for 47k ohms (low gain...

Switchable moving magnet/moving coil phono preamplifier. Volume control allows direct connection to power amplifier. A buffer stage follows the volume control, using an output transformer which provides balanced or single-ended output at low impedance to drive long cables.Two inputs, one with switchable gain and input impedance (internal Mono/stereo switch.