8968 results for "electric fan" between $10.00 and $600.00

Overall dimensions of 22-1/2 inch x 18-1/2 inch x 7 inch Universal fit Electric fan flows 2,500 cubic feet per minute at 18.5 amperes of current draw One year manufacturer warranty and comes with a electric fan of model number 118 17 inch core with right inlet

Condenser Fan Motor, Permanent Split Capacitor, Totally Enclosed Air-over, 1/8-1/3 Hp, Number Of Speeds 1, Nameplate Rpm 825, Nema/iec Frame 48, Voltage 208-230, 60 Hz, Full Load Amps 1.8, Stud Mounting, Auto Thermal Protection, Insulation Class B, Service Factor 1.00, Ball Bearings, Ambient 70 C, Cw/ccw Rotation, Length Less Shaft 5 7/8 In, Shaft Dia 1/2 In, Shaft Length 6 1/2 In, Body Dia 5 5/8 In

CFM: 954.1, Fan Diameter: 328mm, Fan RPM: 2290, Number of Blades: 10, Current: ~5.5A, Volts: 12.3V, Amps: 5.6 Velocity Ft/Min: 740, Inlet Pressure While Tested: -0.038, Air Temp While Tested: 62.1 (degrees F) Purchase Includes: Mishimoto fan, 1 year warranty

Overall dimensions of 22-1/2 inch x 18-1/2 inch x 7 inch Universal fit Electric fan flows 2,500 cubic feet per minute at 18.5 amperes of current draw One year manufacturer warranty and comes with a electric fan of model number 118 17 inch core with left inlet

ACDelco 15-8470 Electric Cooling Fan Kit

Electric Fan

TCI 827250 Electric Slim-Line Fan Kit

Electric radiator fan kit features a 10 inch diameter fan with a 775 cfm rating Made from high quality black plastic Electric fan requires very little amperage and is suitable for use in race cars or tow vehicles Fan is set up as a "puller" unit, mounted behind the radiator. By flipping blades, reversing wires, and mounting in front of radiator, fan will operate in a "pusher" configuration Fan mounting kit is included

Stiebel Eltron, CKT 15E, Wall Heater,White, CKT, Heaters, Assembly 120 Volt Wall Mounted Electric Fan Heater The CK Electric Fan Heater from Stiebel Eltron offers a new exciting room heating alternative for new construction and renovation projects. This unit is an ideal replacement for recess-mount heaters. The design of the CK is both functional and stylish. The elegant curved shape is appealing and efficient. The vent for the CK blows toward the ground. This helps warm cold floors and also allows...

** NOTE : PRODUCT IMAGE MAY NOT BE VEHICLE SPECIFIC

** NOTE : PRODUCT IMAGE MAY NOT BE VEHICLE SPECIFIC

Reliable, long lasting high torque motor lasts up to 3x longer than regular electric fan motors 5 wide paddle blades pull large volumes of air for maximum heat extraction. Designed for maximum performance at high static pressure loads for more effective cooling. Sealed waterproof, dustproof IP-68 certified motors

Single stage fan control thermostat with 180 degree farenheit turn-on temperature Turn-off temperature is preset at 165 degree Farenheit Fits into either a 3/8 inch NPT or 1/8 inch NPT port 3/8 inch NPT x 1/8 inch NPT bushing included

Dual 14 inch Tornado Fans and #16701 bracket assembly Reliable, efficient, high torque motors Ultra-quiet patented skewed blade design 2700 CFM

Overall dimensions of 15 inch x 13-1/2 inch x 4 inch Flows 1,505 cubic feet per minute at just 15 amperes Low-profile shroud design Comes with an adjustable temp sensor and A/C relay One year manufacturer warranty

Designed to provide constant cooling in all conditions Features computer-engineered blades for efficient performance Provides increased horsepower, torque and mileage Equipped with a ring fan that offers better blade support Rigid bracket mounting system for hassle-free installation

10 inch diameter reversible fan 650 CFM Use as a pusher or puller fan