2043 results for "dust collector" between $10.00 and $2,000.00

Collects dust and debris Withstands chemical and water corrosion Compatible with 4-inch grinders Quick setup is intuitive and solid construction is durable Comes with a 1-year limited warranty, Manufacturer: Hitachi

Collects dust from hole drilling up to 1/2-Inch bit Locking friction fitting to ensure collector stays connected to the hose Fits D27904 and; D27905 and part of the DEWALT system of dust extractors, Manufacturer: DEWALT

Dust Collector for 1.31" Needle Scaler with Stepdown Hose This durable tool is made of shatterproof fiberglass reinforced plastic for long lasting dependability. Connects directly to 1.31" Needle Scaler to eliminate dust as it is generated. Includes stepdown hose. 9.00 L. 9.00 W. 9.00 H.

Blade size: 10-Inch Arbor Speed: 4,250 RPM Table Height: 35-Inch, Manufacturer: Shop Fox

Pleated filter design provides five times more surface area than conventional filtration bags, increasing overall performance Equipped with three cleaning flappers to knock dust free from the filter directly into the chip bag for efficient cleaning Features three cleaning flappers to dislodge dust and debris Measures 28 x 22 x 22 inches; weighs 20 pounds Designed for a Delta 1.5 HP dust collector, Weight: 20 lbs., Manufacturer: Delta

4-Inch diameter Easy sliding-gate action Maximize system efficiency, Manufacturer: POWERTEC

Steel collection drum with casters Remote controlled magnetic switch Class F motor Dual pleated filters with cleaning brushes Cleaning flaps maximize filter efficiency, Manufacturer: Shop Fox

1 micron scrim supported 16-Ounce polyester felt Oversized bag Singed treatment inside Long life Excellent airflow, Manufacturer: American Fabric Filter

1 micron scrim supported 16-Ounce polyester felt Oversized bag Singed treatment inside Long life Excellent airflow, Manufacturer: American Fabric Filter

1 micron scrim supported 16-Ounce polyester felt Oversized bag Singed treatment inside Long life Excellent airflow, Manufacturer: American Fabric Filter

Totally enclosed, fan cooled, permanently lubricated motor; designed for industrial applications with a continuous duty rating Heavy-duty construction, mounted on four swivel casters, allowing total mobility and stability Precision spin-balanced impeller for smooth operation and minimal noise Reusable clear plastic collector bag for improved dust collection efficiency Equipped with 2-micron filter bag, Weight: 112 lbs., Manufacturer: General International

Totally enclosed, fan cooled, permanently lubricated motor; designed for industrial applications with a continuous duty rating Heavy-duty construction, mounted on four swivel casters for total mobility and stability Precision spin-balanced aluminum impeller for smooth operation and minimal noise Equipped with 2-micron filter bags Heavy-duty collection bags made from extra thick, transparent, recyclable plastic, Manufacturer: General International

Features 2 mode operation; "rotation only" or "hammering with rotation" Fastest drilling speed in its class Powerful 6.2 amp motor Variable speed; 0 - 1050 rpm and 0 - 4,900 BPM D-shaped handle for comfort and control, Weight: 6.2 lbs., Manufacturer: Makita

Turn on/off the dust collector anywhere in the shop 220 volt, 2.5 hp, 15 amp relay/receiver FCC approved 25 amp internal circuit breaker included in the receiver 5 foot power cord, Manufacturer: PSI Woodworking

Motor: 1/2 HP DC, 115V, 60 Hertz Max. CFM: 700 CFM Bag Filtration: 1 micron Decibel Reading: 87 dB Warranty: 5 Years, Manufacturer: Steel City Tool Works

Dust Collector, Wall Mount, Max Flow 207 CFM, Min Air Flow 117 CFM, Operating Velocity Range 4400 FPM, Static Pressure Range 3.75 In, 3/4 HP, Voltage 115, 60 Hz, 1 Phase, 9 Amps AC, Bag Capacity 36 Gal, Overall Height 72 In, Overall Width 19 In, Overall Depth 17 3/4 In, Max Hose Length 6 Ft, Hose Dia 2 1/2 In, 76 dBA, 1 Micron Filter Bag, Includes 6 Foot Hose, 3 Collector Bags

Includes 5-ft. Wire-reinforced PVC Inlet Hose and Clamps, (2) 30-micron Bags, Sheet Metal Back-port Pick-up Nozzle and 8-feet, 3-prong Power Cord

All returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.