64 results for "cutting crown molding" between $10.00 and $150.00

Intuitive "Cut It The Way You See It" orientation supports the crown molding on your miter saw fence the same way it will be seen and installed on the wall. No more thinking "Upside Down and Backwards" means fewer wrong cuts and less scrap molding. Adjustable angle setting - Set to work with common molding spring angles (38°, 45°, & 52°). Angle Finders included - Easily determine the spring angle of your molding. Wide indented cutting surface. Supports all crown moldings between 2" and 5...

Features Crown-Cut eliminates the complication of cutting crown and cove molding, giving you perfect miters, every time. What’s the secret? Crown-Cut holds the molding at its intended angle while you cut it. No more compound cuts and tedious trial and error! Before Crown-Cut, miscalculated compound cuts produced sloppy miters that screamed for caulk and paint. Crown-Cut requires only a simple miter cut that any miter saw. can do. For a professional-looking job, cut your crown and cove the easy way...

Produce mid-sized crown, cover and bead molding profiles for architectural and furniture applications Industrial Quality Max RPM = 16,000! 1-1/4 Diameter, 2-1/4-Inch Cutting Height, 3/16-Inch Upper Radius, 7/16-Inch Lower Radius, 1/2-Inch Shank For use only in a table mounted router., Manufacturer: Amana Tool

From the creators of some of the best cutting tools of the past 50 years comes an excellent router bit that deserves a place with all your other bits. The Crown Molding Bit from Freud is an excellent way to add elegance to any room's crown molding. Some bits backfire by leaving rough cuts that look worse than before the molding was cut. Not so with Freud; you will always get a smooth cut thanks to the bit being precision ground. Kickbacks happen less frequently with the 99-408. Spicing up your home...

Product Description Carbide Tipped Crown Moldilng Edge Trim Router Bit features 2-3/8 inch Cutting Diameter, 1-3/8 inch Cutting Length, 1/2 inch Shank, 1/8 inch Radius, 38 and 52 degree Angles, 3-3/8 inch Overall Length.

Cutting Diameter (D) 1 1/8”. Cutting Length (H) 2 1/4”. Overall Length (L) 4 3/8”. Shank Diameter (d) 1/2".

Hitachi`s Crown Molding Support works on the left side of the fence to add support while cutting.

Cutting Diameter (D) 1 1/8”. Cutting Length (H) 2 1/4”. Overall Length (L) 4 3/8”. Shank Diameter (d) 1/2".

"Cut It The Way You See It" - No More "Upside Down And Backwards" cutting. Quickly Adjustable angle settings - Works with common molding spring angles (38°, 45°, & 52°). Angle Finders included - Easily determine the spring angle of your molding. Wide indented cutting surface. Supports all crown moldings between 2" and 5.5". Accommodates special dentil style detailed moldings. Collapsible design - For compact storage. Cut finished molding with no break out on the finished surface. Saw blade...

Handy 5/8-inch bore for table saws Cove cutter mounts easily on a tablesaw Used in conjunction with a pair of angled fences Changing fence angle and cutter height allows an almost infinite variety of cove shapes and sizes Finished surface requires very little sanding, Manufacturer: CMT

GIVE YOUR CEILINGS THAT FINISHED LOOK! 2 Flute - 1/2" Shank With this bit you can easily make classic crown moldings with your table-mounted router. The beautiful profile is a large cove flanked by roundovers. Use your fence to control the cutting depth and a featherboard to keep the stock firmly positioned against the fence. Afterwards, bevel the back edges with one of our chamfer bits. Bevel back edges, cutting off 45º excess, with Amana Tool®'s #49406 chamfer bit. For use in a table-mounted...

Applies to horizontal/cathedral ceilings, inside or outside corners. Easy to use (details are in our book). Saves time and material. Eliminates confusion when cutting crown molding. Install Crown Molding Like a PRO!.

Crown molding is notoriously difficult to cut and join. This fixture greatly simplifies producing a coped joint for an inside corner. It allows you to use a hand-held jigsaw, increasing speed and accuracy. Its angled work surface simplifies cutting to the profile and automatically produces the correct back cut to reduce hand fitting.

Blue Tornado router bits manufactured by ValueMax Tools, Inc. is a great value for woodworkers! Extra thick micro-grain carbide is used which results in stronger and longer lasting bits, allows faster feed speeds and smooth cuts, and can be resharpened more times than standard bits. A smooth, full braze on these router bits is the key to keep the tip of the router bit attached to the body during heavy workloads. In addition, the fully-body anti-kickback design provides safer cutting. The router...

Cutting crown molding is no longer the frustrating process it used to be when you have the Kreg Crown-Pro (KMA2800). It holds the trim at the exact angle required, eliminating the need for advanced compound miter cuts and coping. The unique curved design lets you compensate for a variety of crown molding spring angles, and the extension arms allow you to work with crown up to 5-1/2" wide. Itï¿œs easy to use for inside and outside corners, plus the curved base can be locked in any spring angle between...

Blue Tornado router bits manufactured by ValueMax Tools, Inc. is a great value for woodworkers! Extra thick micro-grain carbide is used which results in stronger and longer lasting bits, allows faster feed speeds and smooth cuts, and can be resharpened more times than standard bits. A smooth, full braze on these router bits is the key to keep the tip of the router bit attached to the body during heavy workloads. In addition, the fully-body anti-kickback design provides safer cutting. The router...