1793 results for "compound saws" between $5.00 and $700.00

Well-built with a simple design Compatible with Hitachi C10FCE and C10FCH Compound Miter Saws Designed for power miter saws Quick setup is intuitive Comes with a 30-day limited warranty, Manufacturer: Hitachi

Positive angle stoppers for easy adjustment of the turn table position for miter cutting (At the right and left of the 0°center setting, at 15°, 22.5°, 31.6°, and 45°settings). High sub fence(90mm(3-9/16”)in height. Legibly labeled angle scale and bevel scales. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for; smooth, accurate cutting, fine surface finish, and low noise operation. Poly V-belt and motor...

Revolutionary compact slide system allows the saw head to slide along fixed rails, eliminating the need for rear clearance. Top-mounted, digital, LCD scale swivels to provide clear and accurate miter and bevel readings from any angle. Exclusive laser marker system from Hitachi increases cutting accuracy. Powerful 15 Amp motor with 1,850 Watts of max output power to tackle tough cutting jobs with ease. Micro miter and micro bevel adjustment knobs to dial-in to precise angles. Large pivoting fence...

When fully extended, Kapex Cutting Extension will accommodate materials up to 16 feet in length, expanding for a range from between 60-3/4 inches to 91 inches, from the blade. An adjustable flip stop travels the entire length of the extension, providing accurate and repeatable measurements. A crown support provides additional support for taller materials up to 5-5/8". Includes measuring tape with metric and imperial markings. Extension legs can be removed for compact transportation. The extension...

15 Amp motor, intense power for the toughest cutting jobs. 0-52 degree miter angle range, to the right and left for increased flexibility. 0-48 degree bevel range, to the left with adjustable bevel stops for precision cuts. Horizontal handle with soft, vibration reducing Elastomer grip adds comfort and control. Large extended flip fence, raises to 4" for cutting crown molding vertically. Large table, provides better material support. Thumb actuated positive stops, easy to use for quick miter...

NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS HITACHI PRODUCT. HITACHI DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES. IN NO EVENT SHALL HITACHI BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRUDUCT...

Amps 15.0 Amps. No Load Speed 3,600 rpm. Blade Diameter 12 ". Arbor Size 5/8" or 1 ". Vertical Capacity: Baseboard Against Fence 6-1/2" ". Vertical Capacity: Crown Molding Vertically Nested 6-5/8 ". Horizontal Capacity: Baseboard Lying Flat 8" (10" with back fence) ". Horizontal Capacity: Crown Molding Lying Flat 6-1/2 ". 45° Bevel Cut Capacity (dimensional lumber) 2 x 8 (2 x 10 with back fence) left & right. 90° Cross-Cut Capacity (dimensional lumber) 2 x 8 (2 x 10 with back fence) ". ...

Amps 15.0 Amps. No Load Speed 4,000 rpm. Blade Diameter 12 ". Arbor Size 5/8 or 1 ". Vertical Capacity: Baseboard Against Fence 6-1/2 ". Vertical Capacity: Crown Molding Vertically Nested 5-1/4 ". Horizontal Capacity: Baseboard Lying Flat 8 ". Horizontal Capacity: Crown Molding Lying Flat 6-1/2 ". 45° Bevel Cut Capacity (dimensional lumber) 2 x 8. 90° Cross-Cut Capacity (dimensional lumber) 4 x 6 ". 90° Cross-Cut Capacity (Max Width) 2 x 8. 45° Miter Cut Capacity (Max Height) 4 x 4 dimensional...

Largest crown molding cutting capacity in its class. Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts. Exclusive 6 linear ball bearings deliver smooth, solid, and adjustment-free "dead-on" accurate cuts. Increased capacity for up to 6-5/8" crown molding (vertically nested), 4-3/4" baseboard (vertical), and 12" crosscuts at 90°. Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity. ...

Bosch BA162 Extension & Stock Stop for 10" Compound Miter Saw

Pages: 57, Paperback, Fox Chapel Publishing

Features powerful 15 amp motor and dual post compound pivoting arm Provides a large capability with cuts 52 degrees right and 47 degrees left with 9 positive stops at 15, 22-1/2, 30, 45 degrees left or right and 0 degrees Durably designed with a machined aluminum base, dual aluminum base, dual slide rails and a carbide tip blade Saw includes vertical vise, blade, wrench and triangular rule Covered by 1-Year warranty, Weight: 24.2 pounds, Manufacturer: Makita

Mamba Blades are thin kerf so they require less horsepower and removeless stock. Expansion slots allow the blade to expand and contractto reduce heat build up which can warp the blade and reduce bladelife. Anti-vibration stabilizer vents reduce noise and allow the blade to run smoother. Each plate is roll tensioned to assure blade flatness for a true running accurate cut. Carbide tips are trifoilbrazed for durability and ultra bonding with the plate. Imported.

Powerful 15 amp motor, 3.3 max. tool -horsepower Crown miting detents - 31.6-degree Miter and 33.9-degree Bevel detents for quick, accurate, crown cuts Large 25-inch aluminum base with 3-1/4-inch sliding extension for 28-1/4-inch total length - Provides extra support Speed-track sliding fence system - base and fence slide-independently Tall 3-1/2-inch sliding fence - For easy bevel setups and-increased crown molding cutting capacities, Weight: 0.0 lbs., Manufacturer: Bosch

Miter Saw Accessory, Weight: 0.0 lbs., Manufacturer: Bosch

Made for use with Bosch Miter Saw 3914, Weight: 0.0 lbs., Manufacturer: Bosch