1311 results for "compound miter saws" between $50.00 and $800.00

Well-built with a simple design Compatible with Hitachi C10FCE2 and C10FCH2 Compound Miter Saws Designed for power miter saws Quick setup is intuitive Comes with a 30-day limited warranty, Manufacturer: Hitachi

Well-built with a simple design Compatible with Hitachi C10FCE and C10FCH Compound Miter Saws Designed for power miter saws Quick setup is intuitive Comes with a 30-day limited warranty, Manufacturer: Hitachi

Robert Bosch Tool Corporation ("Seller") warrants to the original purchaser only, that all BOSCH portable and benchtop power tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and...

Dewalt DW713 Specifications: Amps: 15 Amps No Load Speed: 5000 rpm Blade Diameter: 10" Arbor Size: 5/8" Vertical Capacity: Baseboard Against Fence: 3-1/2" Vertical Capacity: Crown Molding Vertically Nested: 4-1/2" Horizontal Capacity: Baseboard Lying Flat: 6" Horizontal Capacity: Crown Molding Lying Flat: 5-1/4" 45degrees Bevel Cut Capacity (dimensional lumber): 2" x 6" 90degrees Cross-Cut Capacity (dimensional lumber): 4" x 4" 90degrees Cross-Cut Capacity (Max Width...

This compound miter saw helps you cut precise bevels and cross-cut 45? and 90? angles with ease. The included carbide-tipped blade has 24 teeth for smooth cuts.

This is a great accurate saw. Although it's not a slider, its very rigid and thus can make very accurate cuts. I'd been testing saws for some time to insure that I got one that had little side to side deflection since I think that's the sign of a good saw. The cheap ones are really flimsy, and sliders tend to flex too. But this baby holds a cut making tight miters. So if you can live with cutting 4x4 or 2x6 you'll like this saw. For that purpose it rates 5 stars. (I gave it 4 since a 2-3x cost slider...

The Milwaukee Warranty Every MILWAUKEE power tool is tested before leaving the factory and is warranted to be free from defects in material and workmanship. MILWAUKEE will repair or replace (at MILWAUKEE's discretion), without charge, any tool (including battery chargers) which examination proves to be defective in material or workmanship from five (5) years after the date of purchase. Return the tool and a copy of the purchase receipt or other proof of purchase to a MILWAUKEE factory Service/Sales...

Bosch. Powerful 15 Amp motor, 3.3 max. tool HP. Crown miting detents 31.6 degree miter and 33.9 degree bevel detents for quick, accurate, crown cuts. Large 25″ aluminum base with 3-1/4″ sliding extension for 28-1/4″ total length provides extra support. Speed-track sliding fence system. Base and fence slide independently. Tall 5-1/8″ sliding fence for easy bevel setups and increased crown molding cutting capacities. Exclusive wedge and slot miter detent system -consistent precise and accurate...

Positive angle stoppers for easy adjustment of the turn table position for miter cutting (At the right and left of the 0°center setting, at 15°, 22.5°, 31.6°, and 45°settings). High sub fence(90mm(3-9/16”)in height. Legibly labeled angle scale and bevel scales. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for; smooth, accurate cutting, fine surface finish, and low noise operation. Poly V-belt and motor...

For 10" Compound Miter Saws.

822-079 - C8FB2 8-1/2" Sliding Compound Twin Rail Saw easily cuts wood and aluminum sash materials:. 115VAC, 9.5A, 1PH, 4,900 RPM motor - 5/8" arbor. 12" maximum cut width at 90°, 2-9/16" maximum cut depth. 0-57° right miter angle range for ultra flexibility; 0-45° left - 11 positive stops. 0-47° left bevel angle range with adjustable stops for compound cutting. Includes 24 tooth carbide blade, dust bag, box wrench, vise assembly and slide fence. 17-7/8" high, weighs 38.6 lbs. 899-194 - C...

10 Inch (254 millimeter) - 40 Tooth Carbide Wood Blade. Extension Wings w/Stop. Dust Bag. Blade Wrench. Allen Keys. Two Each 24 Volt Batteries. Battery Charger. Instructions.

Revolutionary compact slide system allows the saw head to slide along fixed rails, eliminating the need for rear clearance. Top-mounted, digital, LCD scale swivels to provide clear and accurate miter and bevel readings from any angle. Exclusive laser marker system from Hitachi increases cutting accuracy. Powerful 15 Amp motor with 1,850 Watts of max output power to tackle tough cutting jobs with ease. Micro miter and micro bevel adjustment knobs to dial-in to precise angles. Large pivoting fence...

Amperage: 15. Arbor Size: 5/8". At 0/0 Max Height =: 3-5/8" x 12". At 45/0 Max Height =: 2" x 12". At 45/45 Max Height =: 1-1/4" x 8-1/2". Base Molding - Against Fence: 3-5/8". Bevel Angle Range: 47° left and 46° right. Bevel Stops: 0°, 33.9°, 45° left and right. Blade Diameter: 10". Crown Molding - Angled Against Fence: 6". Crown Molding - Laying Flat: 31.6° stops up to 10-1/4". Height: 19". Length: 37-1/4". Max. Tool HP: 3.0. Miter Detents: 10. No Load RPM: 4,800. Rating: 120V....

Item Weight (Pounds): 58.2. Miter Saw Type: Double Bevel Compound. Sliding Action: Sliding. Blade Size: 10-inch. Arbor Size: 5/8-inch. Laser Type: Red Laser. Work Light: No. Operating Voltage: 110 volt / 120 volt @ 60hz (North America). Power Used (Amps): 15.0. RPM (Rotations Per Minute): 3,200. Dust Collection Port Size: No. Vertical Capacity: Baseboard Against Fence: 6-1/2-inch. Vertical Capacity: Crown Molding Vertically Nested: 8-inch. Horizontal Capacity: Baseboard Lying Flat: ...

Amperage: 15. Arbor Size: 1". At 0 bevel/0 miter: 4-1/4" x 12-1/2". At 0 miter/ 45 right bevel: 1-3/4" x 12-1/2". At 0 miter/45 left bevel: 2-3/4" x 12-1/2". At 45 miter and 45 right bevel: 2-5/8" x 8-3/4". At 45 miter/ 0 Bevel: 4-1/4" x 8-3/4". At 45 miter/45 left bevel: 2-3/4" x 8-3/4". Base Molding - Against Fence: 4-1/4" Max. Base Molding - Laying Flat: 12". Bevel Angle Range: 47° to 47°. Bevel Detent: 0°, 33.9°, 45° Left/Right. Bevel Stops: 0°, 33.9°, 45° Left/Right. Blade Diameter...

NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS HITACHI PRODUCT. HITACHI DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES. IN NO EVENT SHALL HITACHI BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRUDUCT...

Amps 15.0 Amps. No Load Speed 3,600 rpm. Blade Diameter 12 ". Arbor Size 5/8" or 1 ". Vertical Capacity: Baseboard Against Fence 6-1/2" ". Vertical Capacity: Crown Molding Vertically Nested 6-5/8 ". Horizontal Capacity: Baseboard Lying Flat 8" (10" with back fence) ". Horizontal Capacity: Crown Molding Lying Flat 6-1/2 ". 45° Bevel Cut Capacity (dimensional lumber) 2 x 8 (2 x 10 with back fence) left & right. 90° Cross-Cut Capacity (dimensional lumber) 2 x 8 (2 x 10 with back fence) ". ...