77 results for "circular saw guide" between $5.00 and $450.00

15-amp motor provides power and torque for any job Laser guide accurately aligns the blade to the cut line Ball bearing construction provides longer tool life Spindle lock makes blade changes quick and easy, Manufacturer: Porter-Cable

Portable saw guide with 2 safe and convenient hand grips for easy guiding; built-in 6-inch hook rule for scribing lines Reduced tear-out since fibers are supported along cutting edge of tool Tool aligns with cut-line or tick mark Saw base will not scratch face of finished materials Limited lifetime warranty, Weight: 0.85 pounds, Manufacturer: Bench Dog

Batteries and charger sold separately On-board, adjustable laser guide shows cut path on any surface, improving guidance and accuracy 6-1/2-inch blade allows cutting of 2-inch lumber at a 45-degree bevel Operates at 3,700 RPM, powering blade cutting tip at 9,950 feet per minute Cordless for convenience and ease of use, Weight: 7.65 lbs., Manufacturer: Porter-Cable

10-Amp motor, 5000 RPM Laser Light Cutting Guide for Improved Accuracy Spindle Lock for Quick Blade Change Ergonomically Designed Front and Rear Handles Includes: 24 T Carbide Tipped Blade, Rip Guide, blade change wrench and 2 AAA Batteries for Laser, Manufacturer: Apprentice

Turn your circular saw into a precision cutting tool Our Pro-Cut™ Circular Saw Guide instantly aligns your saw to the cut line so you’ll get perfect 90° cross-cuts every time. The built-in guides square it to the work piece and the two rubber strips prevent side to side movement. It also prevents your saw from scratching the work piece. An essential aid for marking, measuring and layout, it has a built-in 6” ruler, a 45° triangle for layout work and a straight edge for drawing lines. Pro-Cut™ Circular...

The Makita SP6000K1 6-1/2-Inch Plunge Circular Saw with 55-Inch Guide Rail lets you make precise, splinter-free cuts in a variety of materials. The SP600K1 has a variable speed dial that allows you to choose the optimum setting for your application. This Plunge-Cut Circular Saw has a 12-amp motor with a current limiter for high power without burnout. This Circular Saw has a large cutting capacity and easy-to-make adjustment settings, so it's perfect for anyone wanting hassle-free, perfect cuts...

With the depth adjustment visible from the rear, you can easily reposition the cutting depth in the safest way possible

7-1/4 In. 10 Amp Circular Saw With Laser Guide. 10 amp motor, 5,000 RPM. Laser light cutting guide for improved accuracy. Ergonomically designed front and rear handles. Externally replaceable brushes. Spindle lock for quick blade changes. Includes 24T carbide tipped blade and rip guide. Weight: Approximately 11.48 pounds. Shipping Dimensions: Approximately 15 x 11 x 10 inches.

This Guide is used in Circular Saws. - GUIDE RULE,5177B

10 amp; 5000 RPM. Max cutting depth: 90 degrees - 2 1/4 inches; 45 degrees - 1 11/16 inches. 78 3/4 inch PVC UL Cord w/UL Plug. Accessories: Hex key, guide. High Tech Laser Guide.

Designed for freehand use, the fence is easily locked at any angle from 20° through 160° and will not slip or deflect under pressure. The wooden spar, used to locate the position of the blade in relation to the tongue, avoids guesswork, improving accuracy. Additional spars can be made using wood scraps.

The TS 75 is Festool’s most powerful plungecut saw, providing enough power to slice through the toughest of materials with little concern for swirl or burn marks. At 2-3/4” depth of cut, the TS 75 can power through thick stock with ease. The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor. Splinter-free cutting on both sides of the cut line. Eliminate tear out on both sides of the cut line with the guide rail and replaceable splinterguard...

Incremental trim feature makes tool-free adjustments by 1/8 inch Edge guide for circular and jig saws for cuts up to 10 inches from edge Circle compass for jig saws 4 metal bars and special clips accommodate most circular and jig saws Reversible for left or right hand usage, Manufacturer: Milescraft Inc.

Easy installation: simply replace the outer blade washer of your miter saw with the laser guide unit.Does not fit 12" Ridgid, Pro-Tech, Makita LS1221 and DeWalt DW705S miter saws produced before 2005.Does not fit Porter-Cable Quick-Change, Skil and worm-drive circular saws.

Description Make straight, guided cuts with the built-in laser line on this versatile circular saw. Lightweight and easy to handle. Lightweight die cast aluminum blade guard with dust chute and built-in laser guideMakes bevel cutsProtected trigger with safety lockLarge base plate for stability while cuttingEasy access carbon brushes volts, Hz, amps, watts Max speed: Blade diameter: 7-1/4" Arbor: Depth of cut @ 90°: Depth of cut @ 45°: Bevel capacity: Power cord: Tool weight...

Get it straight! Circular saw guide - the 50" BORA Straight Edge Clamp - attaches to sheets of plywood and serves as a guide for laser accurate cuts. 50" BORA Straight Edge Clamp , attaches to sheets of plywood or multiple 2x4s and serves as a guide for accurate cuts with your hand saw. Locking lever secures clamps into place, while the clamp heads swivel up to 22.5 for angled cuts when needed. Carry it easily from job to job, use it for precision cutting anywhere. Circular saw clamp is ideal for...

Hitachi 302756 Rip Guide for Circular Saws C18DMR C6DC2 C6DC C6DCK C6DCPC

Shop for Power Tool Accessories at The Home Depot. The Milescraft #1400 Saw Guide for Circular Saws and Jig Saws helps deliver accurate, controlled straight angle and beveled cuts. The saw guide includes 4 blades and an instruction manual.