8132 results for "best circular saw" between $10.00 and $350.00

Easily adjusted, powerful circular saw for efficient, accurate cuts. Well-balanced for one-handed operation, with ergonomic second grip for two hands. I really put it to the test plunge cutting 7-8' diameter utility reels for firewood: clinch-nailed double-thickness 2x6, 2x8, and 2x10's, as much as 800 lineal feet of cuts per day. Never overheats, and the motor fan sweeps away sawdust; very helpful in avoiding hundreds of nails. Durable metal base, power to keep going when a blade is dull, and rarely...

SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or misrepaired by persons other than Seller or Authorized Service Station. To make a claim under this Limited Warranty, you must return the complete portable power tool product, transportation...

In no event shall Makita be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of this warranty. Makita disclaims liability for any implied warranties, including implied warranties of "merchantability" and "fitness" for a specific purpose, after the one-year term of this warranty. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state....

Accu-Sight" keeps your cut on line. Patented anti-snag lower guard reduces snags when making narrow cut-offs. Rear View Depth Adjustment for clear visibility & quick cut-depth changes. Safety Lock / Guarded Trigger minimizes accidental starts. On-Tool Wrench Storage for quick and easy blade changes. Ball Bearing Motor Construction for increased durability, twice the lifeAluminum upper and lower guards. Dust port accepts standard shop-vac hose.

Piranha 18 tooth carbide blade provides fast and smooth cutting for everyday jobs

7-1/4-in Circular Saw - 5007F. 24T Carbide-Tipped Blade - D-24826. Blade Wrench - 783204-6

Just return the power tool, properly packaged and postage prepaid to a Ryobi Authorized Service Center. You can obtain the location of the Service Center nearest to you by contacting a customer service representative at 800-860-4050 or on-line through our Service Center locater at www.ryobitools.com. When you request warranty service, you must also present proof of purchase documentation (sales receipt/bill of sale). We will repair any faulty workmanship, and either repair or replace any defective...

The saw is great for sheet goods like plywood, MDF, etc. I've cut thin aluminum and solid surface with the specialty blades and it has performed well. The blade depth can reach nearly 2" but the saw almost always shuts itself down during a cut into solid woods 1" and thicker. Part of this issue is the United States' 120V power, it's a sacrifice over 240V power supply in other countries. I find that if I want to collect dust, I have to plug the saw into one circuit and the vac into another, the...

120 volt-60HZ. 10.0 amp. 4500 RPM. 7-1/4" blade diameter. Blade dimensions: 7.3" x 0.6" x 0.7". 18 tooth per inch. Material for base of blade: No. 1050 carbon steel and carbide teeth. Cutting capacity: 90 degree- 65MM and 45 degree-43MM. Laser (FDA). Depth of cut locking lever. UL listed. Measurements in inches (1/4" increments). (1) rip fence, hex wrench, blade washer wrench and (2) AAA batteries included.

The hypoid gears on this saw deliver more power and greater surface contact than conventional worm drive gears. It features a powerful 15 amp motor for increased productivity and oil bath technology and sealed gear housing for less maintenance. The 0¦ - 51.5¦ bevel capacity with positive stops at 45¦ and 51.5¦ is ideal for truss and rafter cut-outs. You also get large cutting capacity (2-3/8" at 90¦; 1-3/4" at 45¦ and 1-9/16" at 50¦). The lower guard design improves performance when making bevel...

To obtain information on warranty performance, please write to: PORTER-CABLE CORPORATION, 4825 Highway 45 North, Jackson, Tennessee 38305; Attention: Product Service. THE FOREGOING OBLIGATION IS PORTER-CABLE'S SOLE LIABILITY UNDER THIS OR ANY IMPLIED WARRANTY AND UNDER NO CIRCUMSTANCES SHALL PORTER-CABLE BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages...

Pricing subject to change. Circular Saw

The CRL Makita 4200N Circular Saw creates 11,000 RPM for fast and efficient cutting in wood, paneling, aluminum and plastic. The high power (7.8 amp) motor which is low in weight (6.2 pounds) is double insulated and incorporates a lock off button for operator safety. Blade is left side mounted for better sight line visibility. Rugged and non conductive polycarbonate housing is durable, lightweight and well balanced to reduce operator fatigue.

Powerful circular saw. Left side blade is best line of sight for clear cut-line viewing. Spindle lock lever is easy and convenient for quick blade changes. Anti-snag lower guard design will not hang up when making bevel cuts. Powerful blower clears dust away from the cutting surface. Large levers enables easy adjustment of bevel and depth gauges. 56? bevel. Highest power to weight ratio with 15 amps of power and tool weight under lbs. Includes 7-.25 twenty four tooth carbide blade and blade wrench...

Powerful enough to cut through the densest lumber. Magnesium body keeps weight to a reduced 10 pounds. Largest cutting capacity within its class (2-1/2" at 90°). Maximum bevel capacity of 56°. Positive stops at 45° and 22.5° for quick back-and-forth changes. Greater clearance between the main handle and the blade case to provide a better grip. Unobstructed view of the blade at the line of cut. Base and top handle are easily replaceable in the event they are damaged. Reinforced power cord...

MAKITA 5007MG 7-1/4" Magnesium Circular Saw.