21 results for "Video Looping Cable" between $10.00 and $700.00

75-OHM TERMINATOR; for looping video coaxial ribbon cable connectors; Matrix 44

A must for all professionals. 330 pages. 16,000 products. Exclusive & unique solutions. Mailed today.

The American Dynamics Universal Looping Panel facilitates looping video signals to other video equipment. When used with AD168 and AD2050 Matrix Switcher/Controller Systems it enables looping from video inputs and through switching bays and out to committed video output devices. Located on the front panel of the device are 2 BNC connectors contained by the looping panel. Each of the two sets comprises 16 BNC connectors arranged in 8 connector rows. All BNC connectors are connected to video cables...

48 Video Inputs, 8 Video Outputs; Can Be Expanded to 96 x 16. Inputs Allow for Viewing and Control of Cameras, Domes, PTZs, Multiplexers, and Other Devices. Includes Multiple Language Menus and On-Screen Text. Video Inputs 1-40 Individually Selectable for Terminating or Looping with Switches on Rear Panel. Supports Coaxitron® and RS-422 Camera Control. Password Protected Menu Programming. Windows®-Based Manager Software. System Partitioning Prevents Unauthorized Viewing and Control. Wide...

Video patch panel; provides 32 BNC inputs for bringing video inputs into the system or 32 BNC connections for looping video out of the system; includes 16-channel coaxial ribbon cable, 3 feet (0.91 m). (3 VPP units = 2 RUs; actual height of each VPP is 1.07 inches [2.7 cm])

VM1015 The Kramer VM-1015 is a high performance distribution amplifier for composite or SDI video signals. It provides controls to compensate for signal losses inherent in long cable runs.High Bandwidth - 340MHz (- 3dB). Level (Gain) and EQ (Peaking) Controls. Looping Input. Selectable Input Signal Termination. Video AC/DC Coupling Selection. Clamping - Black or Sync Tip Selectable. Standard 19” Rack Mount Size - 1U.INPUTS: 1 video composite or single component, looping, 1Vpp/75ohm; on BNC connectors...

Provides a looping output for easy daisychaining of units. Use it with DVDs, VCRs, audio/video matrix switches, CCTV cameras and monitors, and other analog baseband audio/video equipment. Supports NTSC and PAL systems. Integrates seamlessly with a number of our video/audio baluns (see Buying Tips below), eliminating the need to run expensive coax or audio cable between the audio/video source and destination devices. For one-to-many point-to-point configurations. Video and audio pairs are independent...

SDI/HD-SDI to HDMI. Full HDMI support including embedded audio. Additional 2 Channel RCA jack audio output. Equalized looping SDI/HD-SDI output. HDMI cable included.

The CVA6950 Accessory Video Looping Coupler allows for simultaneous connection of a Lorex, Sylvania or Home Sentinel observation camera to both a monitor and a multi-channel DVR.

CP1051N The CP1051N is a standard size plug to BNC adapter, nickel.Standard size plugs are available with .090-inch (2.29 mm) or .070-inch (1.78 mm) center conductors. Standard size single plugs are made with standard wrench fittings for easy assembly and include a unique cable strain relief clamp. Single plugs, terminating plugs with built-in resistor and capacitor and a selection of looping plugs with or without monitoring are available. Plugs will accommodate a variety of cable sizes and may be...