30 results for "Ultrasonic range finder module" between $25.00 and $75.00

This SRF-25 ultrasonic range finder can be used as a distance meter. The distance can be displayed by the 3 8-segment LEDs in unit of meter. The display LEDs can be removed easily as they are connected using headers.

Click for larger image The SRF10 is a very small high performance sensor that uses sonar to detect objects. It has a much wider field-of-view than the Sharp infrared distance measuring sensors. Interfaces easily with the Mark III or your own robot design. Comes completely assembled - this is not a kit.

This easy to use sensor is from the Maxbotix company. The LV-MaxSonar-EZ0 offers very short to long-range detection and ranging, in an incredibly small package with ultra low power consumption. The LV-MaxSonar-EZ0 detects objects from 0-inches to 254-inches (6.45-meters) and provides sonar range information from 6-inches out to 254-inches with 1-inch resolution. Objects between 0-inches and 6-inches range as 6-inches. The interface output formats included are pulse width output, analog voltage output...

Laser Sighting for Accurate Measurement Up to 50 ft. Fast, Automatic Measurements in Imperial or Metric Version. Memory of Calculations and Readings. Automatic Calculation of Length/Area/Volume. Measure Base is Top or Bottom Selectable. Includes 9V Battery. Packaging:White Box. color:Yellow.

Laser sighting for accurate measurement up to 50 ft. Fast, automatic measurement in imperial or metric version. Memory of calculation of length/area/volume measurement base is top or bottom selectable. Includes 9 V battery.

This Ultrasonic Range Finder adopt laser technology, can calculate length area and volume.

DescriptionOverviewUseful links * Ranges from 1cm to 4m * Returns a positive TTL level signal, width proportional to range * 3-4cm Resolution * Dimensions: 43mm x 20mm x 17mm The Devantech Ultrasonic Range Finder SRF05 allows you to determine the exact distance of an obstacle in the sonar field of view. The cleverness of your robot will depend on a sensitive sensor similar to the one bats use to know their position and track prey. With advanced programming, you can design compensators in...

This is the smarter cousin of Devantech's popular SRF04 sonar sensor. It provides twice the sensing range of the SRF04 plus an on-board MCU which handles the critical timing functions and distance calculations. The SRF08 can report up to 17 echoes from each ping, allowing your robot to identify the shape of a target or identify an open doorway. Echoes can be reported as inches, centimeters or time of reflection. Its overall range is approximately 1" to 18'.

* Ranges from 0cm to 600cm. * One Pin Serial Bus @ 9600 baud. * 3-4cm Resolution. * Supply. * Dimensions: 20mm diameter x 4 cm. *. *. * Frequency - 40KHz. * Range - 18cm to 600cm (Industrial spec', no calibration required). * Range - 0cm to 600cm (Hobby spec' after auto-calibration). * Connection - One Pin Serial Bus @ 9600 baud. * Up to 16 SRF01's connected to a single pin on your controller. * Units - Range reported in cm or inches. * Very light weight, just 2.7gm. * Supplier code...

This easy to use sensor is from the Maxbotix company. The LV-MaxSonar-EZ2 offers very short to long-range detection and ranging, in an incredibly small package with ultra low power consumption. The LV-MaxSonar-EZ2 detects objects from 0-inches to 254-inches (6.45-meters) and provides sonar range information from 6-inches out to 254-inches with 1-inch resolution. Objects between 0-inches and 6-inches range as 6-inches. The interface output formats included are pulse width output, analog voltage output...

DescriptionOverviewUseful links * Ranges from 3cm to 6m * I2C bus interface * 3-4cm Resolution * Dimensions: 32mm x 15mm x 10mm With the Devantech Ultrasonic Range Finder SRF10, it is possible to know the exact distance of an obstacle in the sonar field of view. The cleverness of your robot will use a sensitive sensor similar to the one bats use to know their position. With an advanced programming, you can design compensators in order to perfectly control your motors according to the obstacle...

Laser Range Finder Laser range finder is a instrument to measure the accurate distance to the goal by utilizing laser. While working, laser range finder projects bunch of very thin lasers to the goal, the photoelectric element receive goal reflection's laser beam, the timer determination laser beam receive time from the launch, calculates the distance from the observer to the goal. Laser finder weight is light, the volume is small, simply operation, quickly and accurate, its error is only other range...

The SRF08 has twice the range of the SRF04, increased from 3m to 6m. The SRF04 has a long, 36mS timeout followed by a 10mS recharge time. The SRF08 doesn't have this deadtime. The SRF04 requires 2 I/O pins per sonar, wth 32 I/O lines needed for a 16 sonar system. The SRF08 is read out over an I²C bus, which requires just two lines total to address up to 16 sonars. The SRF08 does all pulse timing internally, freeing the host processor from performing this task. This simplifies the software and...