21 results for "Thorens turntable" between $50.00 and $3,000.00

Technical sophistication and top quality sound are combined with elegant styling in the TD 295 MK IV. The technology is based on tried and trusted components, enhanced by a TP 41 tone arm. The warm wooden table harmonies well with both traditional and modern furniture, making the record player an eye-catching element in any room.

Drive system: Thorens precision belt drive. Motor: electronic controlled DC motor. Speed: 33, 45 and 78 rpm. Speed change: electronically. Platter: 304 mm / 0,8 kg, non-magnetic. Tonearm: TP 19. Pick-up cartridge: Ortofon OM 10 standard. Anti-skating: spring suspended. Automatic: fully-automatic. Switch-off: mechanical switch-off and lift. Capacity of signal leads: 160 pF. Voltage supply: AC-Adapter, available for every important voltage worldwide. Dimensions (WxDxH): 440 x 360 x 119...

Thorens TD-295 Turntable. Free US shipping An outstanding table using a solid wood chassis in a sandwich technology. A massive aluminum platter weighing 2.3 kg is used to get enough inertia and weight to make sure that vibration is absorbed and that speed fluctuation is very low. The motor is fully electronic and synchronous, using a belt to drive the platter. This table stands on decoupling rubber feet and offers both speeds 33 1/3 and 45 RPM by electronic speed selection. Comes complete with the...

Although a well-dimensioned power transformer (e.g., toroidal transformers) can minimize phase shifts, they can not be totally eliminated. This is why the TPN 2000 comes with a massive power transformer (switchable to 100V, 115V, 230V and 240V) plus an isolation transformer, which is able to eliminate nearly all phase shifts. In addition, this combination makes an extremely effective mains filter! Many listening tests have confirmed the effectiveness of isolation transformers as part of an audio...

New innovative Tri-Balance suspended sub chassis turntable. New suspension system to make setting up easy. Low Noise, Low Voltage electronically speed controlled DC Motor. Adjustable belt tension for best performance. Aluminium sub platter with single line contact. Fused silica platter for consistency and sound quality. New low resonance TP92 arm with precision Japanese bearings. Arm adjustable for azimuth and overhang. Operation manual. Drive System belt-drive (flat belt around sub-platter...

The TP 92 tonearm, which was specially designed for Thorens turntables, uses an ultra-low-friction bearing and an innovative magnetic anti-bias system with zero stiction. The arm tube is made from rolled aluminium that is damped using random-mass-reducing technology. The brass counterweight at the end of the arm tube is double-decoupled, and the tonearm is so designed that its centre of gravity is level with the stylus.

Assembly of the TP810 is simple. It comes mounted with a Rega sourced TP250 tone arm. The arm is contained within a VTA adjuster and locking collect system. You simply place the surface protectors under the three adjustable polymer-damped feet. level the table by adjusting the feet, mount the platter, pull the square belt around the motor pulley, connect the motor cable to the electronic motor controller and plug it in. Aside from installing the cartridge (not included) and adjusting the counterweight...

The Thorens TD-158 TD 158 TD158 turntable was fitted with a Dual DMS-251S DMS251S phono cartridge and a Dual DN-251S DN251S needle stylus. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

Designed for simplistic operation, the automatic function not only sets the needle on the record but returns it to its resting place at the end, shutting off the drive motor. Despite the simplistic attitude, there is real technology under the hood, where it belongs. A Thorens precision belt drive system and an electronically controlled DC motor system provide stable speed control including 33, 45 and 78 speeds! A proprietary low noise bearing system provides exceptional sonic performance and long...

Designed for simplistic operation, the automatic function not only sets the needle on the record but returns it to its resting place at the end, shutting off the drive motor. Despite the simplistic attitude, there is real technology under the hood, where it belongs. A Thorens precision belt drive system and an electronically controlled DC motor system provide stable speed control including 33, 45 and 78 speeds! A proprietary low noise bearing system provides exceptional sonic performance and long...