101 results for "Smoothing Plane" between $25.00 and $700.00

Gray, cast-iron base with precision-ground sides and 9-3/4'' long bottom. Durable epoxy coating provides long-lasting protection. Hardened, tempered steel gives precision-ground cutter edge durability. Fully machined and polished double-iron cutter and lever. Frog seat is machined for precise mouth adjustment. Cutter adjusts for depth and alignment, offering precise control. Solid-brass, cutter-adjustment knob. Quick-release cam-lock makes iron removal easy. Kidney-shaped hole in lever cap...

The Footprint Pro Smoothing Plane is the most popular bench plane. As with all Footprint Planes, the casting is machined and the base machine ground to provide complete accuracy. The frog contact points on the Footprint Jack Plane are also machined and the mouth is broached so that it is square to the sides. The handles are made from traditional beechwood.

Replacement iron for the Lie-Nielsen Low Angle Smoothing Plane.

- 6-1/2" long sole - curved sides (coffin) - steel, brass or bronze sides - dovetail construction - 1-3/4" wide Iron - 45˚-52.5˚ bed angle - Honduran Rosewood or Brazilian Kingwood infill Prices start at $1,900.00 CDN Plane shown is Honduran Rosewood infill, bronze sides

Stanley No 4 1/2 Smoothing Plane. This plane features extra width and length, and is heavier than the No 4. The cutter is 2 3/8" wide, 3/8" wider than the regular No 4, and an inch longer. The weight reduces chatter and helps the plane set close to the wood, thus providing a very smooth surface. Good+

Designed for dimensioning and smoothing wood. A patented lateral adjuster makes for quick and simple blade adjustments. A one piece base and frog unit provides blade stability and reduces chatter. Ductile cast iron body with an adjustable mouth. 2” wide and 1/8” thick A2 steel blade. Cherry handle and tote. 2-1/2” wide by 10” long.

The Smoothing Plane is the workhorse in the shop. Designed to smooth rough-sawn lumber, it is also the tool of choice for planing doors and windows as well as other planing chores around the shop. Hardwood handle and knob provide tremendous control. Smoothing Plane measures 9-3/4" long.

A re-sharpenable 48mm blade for those who love the Rali Plane quality and features but prefer a more permanent blade to the disposables. Fits the Rali #260 L Smoothing Plane. Switzerland

Kakuri Smoothing Planes are designed to give the same fine cutting features of Japanese style planes, while at the same time, reducing the time and effort required to ready them for use. The blades are heavy high carbon steel tempered to Rockwell c60- c63 and sharpened to a razor edge. The easily adjustable chip breaker is held firmly in place with a thumbscrew. The blades can be easily resharpened or inexpensively replaced. The body is from the heartwood of Japanese White Oak. Our 1-3/4" Smoothing...

Dimensions: 3.74 in x 3.35 in x 1.97 in (9.5 cm x 8.5 cm x 5.0 cm)

Modeled on the nearly extinct Stanley 164, this short version of the low angle jack has an adjustable mouth and 2" wide iron set at 12°. The ductile iron body is 9-1/2" long. It features a unique Bailey overhead lateral iron adjuster.

Planes are engineered to exact tolerances while maintaining traditional standards of workmanship, design and performance.Blades are 95% carbon steel with a hardness of 58-62HRC. Hardness Rockwell CGuaranteed sole flatness to within 0.003.Simple and precis

The Smoothing Plane is the workhorse in the shop. Designed to smooth rough-sawn lumber, it is also the tool of choice for planing doors and windows as well as other planing chores around the shop. Hardwood handle and knob provide tremendous control. Smoothing Plane measures 9-3/4" long.

Our Ten Sho Plane cutting inserts are made from alloyed high speed steel for increased durability and are tempered to Rockwell c65 The insert is accurately aligned by a grooved slot in the support blade. The chip breaker is aligned to the support blade by two tabs. In addition a screw tightly binds the chip breaker to the support blade. This exceedingly rigid assembly is then placed into the plane body in the same manner as our other Japanese planes. The plane body is made from the most desirable...

A Stanley No 3 Smoothing Plane, Type 15, Sweetheart vintage, 1931-32. 8 inches long, 1 3/4 inch cutter, rosewood handle and knob. Some minor staining and a small area of light pitting on the back end of the sole which does not affect the useability of the plane. Good+

Smoothing Planes are used for shapning, truing-up and final planing of the surface of your work. They will leave a silky, smooth sheen on most types of wood. The Dai (wooden plane bodies) are hand-cut from the best quality Kashi (Japanese White Oak), the strongest and most durable of indigenous Japanese woods. It is porous and easily absorbs penetrating oil finishes, which years of experience have shown will greatly enhance the stability of the Dai in the drier U.S. climate. Our Japanese planes are...

These miniature planes are hand made by the Crown Hand Tool company in England. They are excellent for small work and models and for touch-up on full size projects. The sides are brass lined, with rosewood infill. The blade holders are heavy brass with knurled brass tightening screws. The blades are high carbon tool steel and require a bit of additional honing for maximum performance. Their overall length is 2- 3.4". The width of the Smoothing plane is 3/4" and cutting width is «". The blade angle...