75 results for "Rapid Burr" between $5.00 and $100.00

Combined both coarse and fine teeth in one burr providing rapid removal and smooth finishing Burrs feature a unique flute design Coarse pitch flutes for rapid material removal, while maintaining a smooth surface finish Ideal for use in deburring of material such as copper, bronze, aluminum alloy, etc. 30-percent more efficient than normal double cut rotary burr, Weight: 0.6 lbs., Manufacturer: Astro Pneumatic Tool Co

RAPID-BURR NOGA DEBURRING TOOLS

Description: The basic blade used for steel, aluminum, wood or anything.

These hard-to-find C2 grade carbide burrs are known for their long life and durability. Feature double-cut flutes for rapid metal stock removal, smaller, finer chips, and reduced pulling for better operator control. All burrs have 1/4" shank for easy fit into any of our high-speed die grinders. Great for porting heads, enlarging holes, smoothing weld beads, cutting, or tool and die work. Available in different sizes below. Made in USA.

The 21-piece set includes six diamond-point burrs, three high-speed steel (HSS) cutters, six engraving cutters, and six polishing points. The diamond-point burrs, with 1/8" dia. shanks, are suitable for light shaping, sharpening, or marking materials such as glass, ceramic or metal. Useful for detail work in wood, plastic, and non-ferrous metals, the engraving cutters have 3/32" shanks. The HSS burrs have 1/8" shanks and larger cutters suitable for rapid shaping of wood or plastic. For buffing metals...

Super-hard carbide burrs used in a high-speed die grinder can really make tough jobs easier. Grind weld beads, shape parts, smooth rough castings, port cylinder heads. All burrs have a 1/4 dia. shank. This burr is for use on Steel and Iron. Carbide Burr SF-5 Tree Shaped Use with your high speed die grinder. Great for rapid material removal from steel, and cast iron. For a smoother cut apply Grinder's Grease (13119). Works best when used with light pressure.Super-hard carbide burrs used in a high...

Carbide Burr Products Abrasives > Carbide Burr Products Carbide burrs are used for rapid removal of sharp edges and excess metal material. Can be used on many metals including cast iron, steel and aluminum.

Unique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks.

Map titles include: Ayer,Badger Mountain,Basin City,Benge,Benton City, Beverly,Beverly NE,Beverly SE,Bruce,Buroker,Burr Canyon,Cairn Hope Peak, Clyde,College Place,Columbia Point,Connell,Connell SE,Coppei,Corfu,Corral Canyon,Coyote Butte,Coyote Rapids,Dixie,Eagle Lakes,Eltopia,Elwood,Emerson Nipple,Eureka,Frenchman Hills Lake,Frischknecht,Gable Butte,Glade,Grandview, Hadley,Hanford,Hanford NE,Harsha,Hatton,Hatton NW,Hooper,Hooper Lake,Horn Rapids Dam,Humorist,Huntsville,Iowa Flats,Johnson Butte,Kahlotus...

These burrs are used for aggressive wood removal. Their unique structurally aligned tungsten carbide points leave a smoother finish, do not load as quickly and last longer than other types of tungsten carbide burrs. Use the coarse grit (red color) for rapid and aggressive shaping and roughing out work. Use the fine grit (blue color) for general shaping and sanding. The Typhoon burrs are easily cleaned using a brass brush. Maximum RPM is 35,000 for the 1/8" shank burrs and 25,000 for the 1/4" shank...

These burrs are used for aggressive wood removal. Their unique structurally aligned tungsten carbide points leave a smoother finish, do not load as quickly and last longer than other types of tungsten carbide burrs. Use the coarse grit (red color) for rapid and aggressive shaping and roughing out work. Use the fine grit (blue color) for general shaping and sanding. The Typhoon burrs are easily cleaned using a brass brush. Maximum RPM is 35,000 for the 1/8" shank burrs and 25,000 for the 1/4" shank...

Carbide Burr Products Abrasives > Carbide Burr Products Carbide burrs are used for rapid removal of sharp edges and excess metal material. Can be used on many metals including cast iron, steel and aluminum.

This Cylinder Square Carbide burr is quality made in Germany and is suitable for all power carver units that accept 1/8" shank burrs. Excellent for rapid wood removal, this burr cut cleanly, quickly and produce smooth cuts. Crafted from Carbide, this burr will hold a sharp cutting edge significantly longer than any high speed steel burr. The burr is rated for a speed up to 35,000 RPM. View Traditional Woodworker's Entire Selection of Carving Tools.

Saburr heavy duty carbide toothed burrs are for carving and shaping wood, plastics, plaster and fiberglass at speeds up to 24,000 RPM. The razor sharp carbide teeth are arranged into a unique open pattern to resist loading while providing rapid stock removal and a smooth finish.

This Flame Carbide burr is quality made in Germany and is suitable for all power carver units that accept 1/8" shank burrs. Excellent for rapid wood removal, this burr cuts cleanly, quickly and produce smooth cuts. Crafted from Carbide, this burr will hold a sharp cutting edge significantly longer than any high speed steel burr. This burr is rated for speeds up to 60,000 RPM. View Traditional Woodworker's Entire Selection of Carving Tools.

This Cone Carbide burr is quality made in Germany and is suitable for all power carver units that accept 1/8" shank burrs. Excellent for rapid wood removal, this burr cut cleanly, quickly and produce smooth cuts. Crafted from Carbide, this burr will hold a sharp cutting edge significantly longer than any high speed steel burr. The burr is rated for a speed up to 35,000 RPM. View Traditional Woodworker's Entire Selection of Carving Tools.

This top quality, 1/4" shank, Cylinder Square Carbide Burr features extra deep flutes for extra rapid wood removal without clogging. This burr is quality made in Germany and is suitable for all power carver units that accept 1/4" shank burrs. This burr cuts very aggressively yet produces a very smooth finish. Head diameter is 3/8" and length of cut is 3/4". Overall length is 2 3/4". Rated for speeds up to 35,000 RPM. View Traditional Woodworker's Entire Selection of Carving Tools.

This Cylinder Radius Carbide burr is quality made in Germany and is suitable for all power carver units that accept 1/8" shank burrs. Excellent for rapid wood removal, this burr cuts cleanly, quickly and produce smooth cuts. Crafted from Carbide, this burr will hold a sharp cutting edge significantly longer than any high speed steel burr. This burr is rated for speeds up to 60,000 RPM. View Traditional Woodworker's Entire Selection of Carving Tools.