314 results for "Radial arm saws" between $2.00 and $4,000.00

A radial arm saw may just be the most versatile power tool in the shop—and also the most hazardous. This video thoroughly acquaints viewers with it. A viewable/printable instructor’s guide is available online. Correlates to competency standards for core curriculum and carpentry from the National Center for Construction Education & Research. A Shopware Production. (17 minutes)

Laser Trac technology 3 horsepower maximum dev. Control Cut feed rate motor Sturdy work surface accommodates large work pieces Built in accessory shaft accepts a wide variety of optional accessories Automatic blade brake stops blade in seconds, Manufacturer: Builders World Wholesale Distribution

New design provides greater cutting capacity for cross-cutting nominal 2" thick stock up to 16" wide. Miter cutting capacities in nominal 2" thick stock have also increased 10 1/2" at 45? left and 11" at 45° right.

* Fits most radial arm saws and machines with a 5/8" threaded arbor shaft. * Provided with 2 sets of Silver Oxide batteries. * Laser Module - <5mW Wavelength - 650Nm Class IIIA Laser. * New brighter more acurate laser line. * New thinner design to fit more saws. * New recessed laser design to protect the laser from being hit on deep cuts.

2HP, 230V, 1PH, 3,450 RPM motor - 5/8" arbor. 3-3/4" maximum cut depth at 90°, 2-1/2" at 45° - 24-1/4" maximum rip capacity, 14-3/8" crosscut. 0°, 45°, 90° positive bevel stops - 90° and 45°, right and left, miter. 25-1/2" x 30" table. 63-1/2"H x 30"D x 32"W. 300 lbs. net weight; 318 lbs. shipping weight. 2HP, 230V, 1PH, 3,450 RPM motor - 5/8" arbor. 3-3/4" maximum cut depth at 90°, 2-1/2" at 45° - 14-3/8" maximum crosscut, 24-1/4" rip. 0°, 45°, 90° positive bevel stops - 90° and 45°, right...

40790 DeWalt Radial Arm Saws(2) (1)5HP, 16", 220/440, 3PH, & (1)7.5HP, 16", 220/440V, 3PH, good cond. Price is for ea. OBO! $ 550 Located in : PA

Cast-iron track, column, and column support for rigidity and continued accuracy Depth-of-cut control handle and locking levers are positioned above the table for easy access Extra-large table provides support for wide panels or large work pieces Provides greater cutting capacity for crosscutting nominal 2-inch thick stock up to 16-inch wide Miter cutting capacities in nominal 2-inch thick stock are 10-1/2-inches at 45 degree left and 11 inches at 45 degree right, Weight: 186 lbs., Manufacturer: Delta

Biesemeyer T-Square Gang Stop is ideal for performing multiple cuts simultaneously with your radial arm saw. Built standard for 12" wide tables. Fence Height 1-5/8" The stop is made with sturdy steel components and a 1-1/2" aluminum gang bar.

Provides an excellend finish in soft/hardwoods. Designed for use in a sliding compund miter saw. 10-Inch x 60 Teeth Alternate Top Bevel grind, -5 Degree Hook, 5/8 Bore Laser cut expansion slots allowing the blade to expand and contract from heat preventing warpage Thin Kerf reduce waste in material and require less horsepower. Industrial Quality. Made in Germany., Manufacturer: Amana Tool

-For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as PVC substrates

This is an accessory for Nordfab's Quick-Fit Ducting - "The World's Fastest Ducting."Quick-Fit clamps together in seconds without welds, bolts, screws, flanges, special tools, precise measurements or specialized skills. It cuts installation time - and duc

Blade diameter of 14 inches, 1-inch arbor diameter, maximum depth of cut at 90 degrees is 4 5/8 inches, 3-1/8 inches at 45 degrees Maximum distance, blade to table, of 2 3/4 inches, 3450 rpms Maximum crosscut thickness and width of 4 5/8 inches by 25 inches Head tilt angle range of 0 to 90 degrees (to left), maximum ripping capacity of 31 inches Maximum miter cut at 45 degrees is 17.5 inches, miter capacity of 60 degrees to left, 45 degrees to right, Manufacturer: General International

-For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as PVC substrates

-For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as PVC substrates

-For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as PVC substrates

-For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as PVC substrates

-For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as PVC substrates