|
Craftsman Professional 3 hp 10" Radial Arm Saw with LaserTrac 22010
This Craftsman Professional 3 hp 10" Radial Arm Saw features Laser Trac technology designed to assist in aligning the blade to the work piece. With a sturdy work surface for large work pieces and a built-in accessory shaft, this radial saw is durable, versatile and exceptionally strong.The Delta 33-400 14-inch Radial Arm Saw offers extra cutting capacity with the extra-long turret arm on this heavy-duty radial saw. Crosscut up to 29 inches and rip up to 41 inches with the Delta 33-400 in the outboard... |
$899.99 sears.com |
Top stores
sears.com
$899.99
|
|
Oshlun SBW-100060N 10-Inch 60 Tooth Negative Hook Finishing ATB Saw Blade with 5/8-Inch Arbor for Sliding Miter and Radial Arm Saws
Thin Kerf for Fast Cuts Negative Hook Angle Professional Grade C-4 Carbide Anti-Vibration Slots, Manufacturer: Oshlun |
$44.48 |
Top stores
Amazon.com
$44.48
|
|
6 Radial Arm Saw Hood
This is an accessory for Nordfab's Quick-Fit Ducting - "The World's Fastest Ducting."Quick-Fit clamps together in seconds without welds, bolts, screws, flanges, special tools, precise measurements or specialized skills. It cuts installation time - and duc |
$295.49 |
Top stores
Rockler.com
$295.49
|
|
SEPTLS219RS830 Delta machinery Professional Radial Arm Saws - RS830
Delta machinery SEPTLS219RS830 Miter cutting capacities in nominal 2 thick stock have also increased 10 1/2 at 45 left and 11 at 45 right. Miter scale has large 0 to 45 markings left and right for easy selection of miter setting. Cast-iron track, column and column support for rigidity and continued accuracy. New depth-of-cut control handle locking levers are positioned above the table for easy access. New design provides greater cutting capacity for cross-cutting nominal 2 thick stock up to 16 wide. |
$2,478.79 |
Top stores
Shoplet.com
$2,478.79
|
|
8-1/4" Radial Arm Saw
Item # 42933 Manufacturer: Chicago Electric Power Tools |
$299.99 |
Top stores
Harbor Freight Tools
$299.99
|
|
Questions about the Delta 33-420 Radial Arm Saw
Motor: 5 HP, 1 Phase, 230V, 60 Hz, 3,450 RPM, TEFC (totally enclosed, fan cooled) motor. Motor Control: 24V Push-Button Station, Magnetic Starter, Transformer & Overload Protection (LVC). Blade Diameter: 18". Arbor Size: 1". Crosscut Capacity (1" depth of cut): 29". Miter at 45° R & L (1" depth of cut): 22". Maximum out rip: 41". Dado Capacity: 2". Depth Of Cut At 90 Degrees: 4-7/8"; Without leaf guard: 6-1/16". Max. 45 Degree Bevel Cut: 3". Bevel Stops: 0°, 30°, 45°, 60° and 90 °. Miter... |
$6,854.00 |
Top stores
Tools Plus
$6,854.00
|
|
CRAFTSMAN 10" radial arm saw Leg/side brace Parts | Model 315220100
|
$204.77 |
Top stores
Sears Parts Direct
$204.77
|
|
Amana Tool RA1442 Carbide Tipped Radial Arm 14 Inch Dia x 42T TCG, -2 Deg, 1 Inch Bore Circular Saw Blade
Radial Arm Saw Blades |
$145.58 |
Top stores
Toolstoday.com
$145.58
|
|
Delta RS830 10" 1-1/2 HP Radial Arm Saw
* Cast-iron track, column and column support for rigidity and continued accuracy. * Depth-of-cut control handle and locking levers are positioned above the table for easy access. * Steel stand for sturdy support. * Extra-large table provides support for wide panels or large workpieces. * Provides greater cutting capacity for cross-cutting nominal 2" thick stock up to 16" wide. * Miter cutting capacities in nominal 2" thick stock are 10-1/2" at 45° left and 11" at 45° right. * Dual-threaded... |
$1,514.31 |
Top stores
PlumberSurplus.com
$1,514.31
|
|
Oshlun LG-R01 Radial Arm Saw Laser Guide
Fits most radial arm saws and saws with a threaded 5/8-Inch arbor shaft New recessed laser design to protect the laser from hitting the material on deep cuts New thinner design to fit more saws New brighter and more accurate laser line Includes extra set of silver oxide batteries, Manufacturer: Oshlun |
$19.99 |
Top stores
Amazon.com
$19.99
|
|
060009 Radial Arm Saw Joinery/Erpelding (VHS)
You can use an Ordinary radial-arm saw to cut precise joints for making furniture. Curtis Erpelding shows that there's no limit to what you can make with this versatile machine. Your will learn about Making accurate sophisticated joints, laying out open mortise-and-tenon joints, cutting open mortise-and-tenon joints, frame construction using open mortise-and-tenon joints, using a set of simple fixtures as precision cutting system, cleaning up joints with hand tools, how joinery relates to design... |
$15.95 mikestools.com |
Top stores
mikestools.com
$15.95
|
|
Delta 10" Radial Arm Saw
* Powerful 1-1/2 HP capacitor run motor. * Miter cutting capacities in nominal 2" thick stock have also increased 10-1/2" at 45° left and 11" at 45° right. * Miter scale has large 0° to 45° markings left and right for easy selection of miter setting. * Cast-iron track, column and column support for rigidity and continued accuracy. * Depth-of-cut control handle locking levers are positioned above the table for easy access. * Easy-to-read inboard and outboard rip scale. * Includes stand, 1-1... |
$1,499.00 7corners.com |
Top stores
7corners.com
$1,499.00
|
|
Northfield Uni-Point Radial Arm Saw
Used machine. Northfield X36AF uni-point radial arm saw. 5 hp Shipping to be added. Call for shipping information. Manufacturer: Northfield SKU: X36AF Unit of Measure: ea |
$1,000.00 cayceco.com |
Top stores
cayceco.com
$1,000.00
|
|
radial arm saw 3D model
Also, check out my Drill Press, Table Saw, Jointer, Grinder , Dust Collection System or Woodshop Collection. If you are interested in a broad variety of similar models by this modeler; search mallsopp. |
$40.00 turbosquid.com |
Top stores
turbosquid.com
$40.00
|
|
Radial Arm Saws DVD (Chaptered)
A radial arm saw may just be the most versatile power tool in the shop—and also the most hazardous. This video thoroughly acquaints viewers with it. A viewable/printable instructor’s guide is available online. Correlates to competency standards for core curriculum and carpentry from the National Center for Construction Education & Research. A Shopware Production. (17 minutes) |
$79.95 films.com |
Top stores
films.com
$79.95
|
|
Radial Arm Saws DVD + 3-Year Streaming
Help your students get in the groove. This video introduces the router through table-mounted and freehand applications. A viewable/printable instructor's guide is available online. Correlates to competency standards for core curriculum and carpentry ... (more details) |
$119.93 filmsmediagroup.com |
Top stores
filmsmediagroup.com
$119.93
|
|
Sears Craftsman Radial arm saw
I'm making room, and this babys gotta go! Its a craftsman radial saw complete with digital and electronic up/down functions. It does need a new blade, but other than that, its a fantastic deal. foo. 206-930-3094 (cell) jess |
$75.00 sellitforfree.com |
Top stores
sellitforfree.com
$75.00
|
|
Table / Radial Arm Saw - DVD
When time constraints make training difficult, you can still cover the bases with our "5 Minute Quickies" videos. Each of these safety training videos is approximately 5 minutes long, depending on the subject matter. OSHA Compliant. |
$160.00 acmeofficesupply.com |
Top stores
acmeofficesupply.com
$160.00
|
|
Table and Radial Arm Saw Safety
|
$135.00 digital-2000.com |
Top stores
digital-2000.com
$135.00
|
|
Used Delta 16" Radial Arm Saw
Condition: Cleaned/Checked Year Manufactured: Used Delta Radial Arm Saw 16 Inch 3HP 3 Phase Serial Number: 84J17885 As taken from service. Machine was operating when taken from service. Any repairs will be on time and materials basis. Taken from service in good operating condition. Cleaned thoroughly. Minor repairs as needed. Tested machine with materials. Installed safety and notice placards. Guaranteed. Needs repairs due to worn, broken, or defective parts. Possibly missing parts and/or tooling... |
$2,750.00 hermance.com |
Top stores
hermance.com
$2,750.00
|
|
Woodtek 14" Radial Arm Saw"
In addition to crosscuts, this saw will let you cut into your workpieces from a variety of different angles and directions. Vertical yoke handle and conveniently located upfront operating controls - top-mounted blade elevating wheel w/lock. Rear-directed sawdust chute helps keep chips away from the cuts. Formed steel base assembly provides strength and durability. Laser cut line indicator, sawblade, anti-kickback device, base, table clamps, blade guard, hardware and complete instructions included... |
$2,749.99 woodworker.com |
Top stores
woodworker.com
$2,749.99
|
|
Chop Saws & Radial Arm Saws 12in x 60T ATB, Popular Tools RA1260A
Click the button below to add the Chop Saws & Radial Arm Saws 12in x 60T ATB, Popular Tools RA1260A to your wish list. |
$81.00 carbideprocessors.com |
Top stores
carbideprocessors.com
$81.00
|
|
Radial Arm Saw Basics Cliffe, Roger W. Juvenile Fiction General Religi
N/A |
$11.87 |
Top stores
goHastings
$11.87
|
|
DEWALT (3573) 16" RADIAL ARM SAW
DEWALT "3573" 16" RADIAL ARM SAW 5HP motor, 16" diameter blade capacity 1" diameter arbor, 3,425 RPM spindle speed 30" x 50" Table, 31" stroke Includes: automatic carriage return, magnetic starter, blade guard, Voltage: 220-440/60/3 Phase Email: dan@gwmsales.com for freight quote or leasing information. Any additional questions contact Dan at 704-771-0479 |
$3,275.00 globalwoodworkingmachinerysales.com |
Top stores
globalwoodworkingmachinerysales.com
$3,275.00
|
|
Radial Arm & Chop Saw Blades
Similar to our general purpose blades but designed with a negative hook angle to prevent grabbing. This saw provides excellent crosscuts on both solid wood and wood products such as MDF. |
$105.00 bladesllc.com |
Top stores
bladesllc.com
$105.00
|
|
Radial Arm Saw Mortising Attach
In addition to making precise 90° cuts, angled mortises are as easy as using your saw's controls - just as you would to make a miter cut. Designed primarily for timber framers, this versatile tool can be used in furniture making as well. Guard retracts when it contacts workpiece; adjustable depth gauge for consistent and accurate cuts. 6-7/8" maximum cut depth. 1/4" thick x 2-3/8" wide bar with chain. 2,150 FPM chain speed. 9" square maximum timber size. 1-3/16" radius in bottom cut. 1/2... |
$154.99 woodworker.com |
Top stores
woodworker.com
$154.99
|
|
Used Dewalt GR54 Radial Arm Saw
Condition: ATFS Year Manufactured: Used Dewalt Model GR54 Radial Arm Saw. 3 HP, 220 volts, 29" arm, four conical bearing mounted head. SN 103304 As taken from service. Machine was operating when taken from service. Any repairs will be on time and materials basis. Taken from service in good operating condition. Cleaned thoroughly. Minor repairs as needed. Tested machine with materials. Installed safety and notice placards. Guaranteed. Needs repairs due to worn, broken, or defective parts. Possibly... |
$750.00 hermance.com |
Top stores
hermance.com
$750.00
|
|
Chicago Electric Power Tools 8-1/4" Radial Arm Saw
Make complex cuts, crosscuts, even rip cuts with the same tool! Includes free 8-1/4" X 40 Tooth C2 tungsten carbide - Visit Harbor Freight Tools For More Information. |
$299.99 |
Top stores
Harbor Freight Tools
$299.99
|
|
14" Radial Arm Saw 5HP Motor 27 1/2" Cross Cut Capacity 36 5/8" Rip Capacity
14" Radial Arm Saw 5HP Motor 27 1/2" Cross Cut Capacity 36 5/8" Rip Capacity. |
$4,101.00 omgainc.com |
Top stores
omgainc.com
$4,101.00
|
|
Big Horn 14201 Laser Radial Arm Saw
|
$24.99 toolmarts.com |
Top stores
toolmarts.com
$24.99
|
|
Chicago Electric Power Tools 8-1/4" Radial Arm Saw
|
$299.99 blueray.com |
Top stores
blueray.com
$299.99
|
|
D2K5-1037DVD - Digital 2000 Table / Radial Arm Saw - DVD
When time constraints make training difficult, you can still cover the bases with our "5 Minute Quickies" videos. Each of these safety training videos is approximately 5 minutes long, depending on the subject matter. OSHA Compliant. |
$134.95 |
Top stores
Betty Mills
$134.95
|
|
DE WALT ( 3576 ) 22" RADIAL ARM SAW, used woodworking machinery
DE WALT 22" RADIAL ARM SAW 7.5 HP 230/460 volt 3 phase 38" cross cut capability Max 8" depth of cut |
$3,587.20 machineking.com |
Top stores
machineking.com
$3,587.20
|
|
Industrial Radial Arm Saw Blades - L07 36 (2ATB + Raker)
|
$159.20 tristatemach.com |
Top stores
tristatemach.com
$159.20
|
|
Original Saw 12" Contractor Duty Radial Arm Saw mfg. item #: 3512-03
3 hp 1 phase 208/220 volt TEFC motor 60 Hz (3512-01). 3 hp 3 phase 208/230/460 volt TEFC motor 50/60 Hz (3512-03). Automatic blade braking system. 24â crosscut standard on all machines in series. Precision carriage riding on 4 tight tolerance convex bearings mounted horizontally. Oversized MDF table top. Powder coated heavy gage steel frame and legs. Standard worktable height 32â. Arbor nut and precision ground arbor collars. Wrench kit (includes allen arbor wench and flat arbor wrench... |
$3,698.00 southern-tool.com |
Top stores
southern-tool.com
$3,698.00
|