2540 results for "Protractor" between $1.00 and $150.00

Electronic Digital Protractor, Length 6 In., Range 0 to 360 Deg, 90 x 4, Accuracy Plumb +/-0.1 Deg/Level +/-10 Deg, Repeatability +/-0.05 Deg, LCD Display, Features Reading Hold, Zero Alternate Reference, Machined Aluminum Frame, 9 Volt Battery

Features: -Measure range-of-motion for all major articulations, cervical rotation, lateral flexion of the head and anterior-posterior cervical flexion. -Bubble level assures measurement is made on horizontal plane. -Two 180� opposing scales in 5� increments.

Protractor 360-degree 4-inch Beveled edges Imprints are in one-degree increments of the 4-inch and half-degree on the 6-inch and 8-inch

Measures angles in any plane Compact design for tight locations 0.1 degree resolution, accuracy, and repeatability Sets both miter and bevel angles on almost any machine Strong magnets on all blade edges for ease of use, Manufacturer: Wixey

Embedded magnets with 35 pounds pull Measuring range of 360 degrees (4 X 90 degrees) Resolution of .05 degrees Accuracy of +/- .1 degree Repeatability of +/- .1 degree

Ground stainless steel 3-3/8-Inch by 2-Inch head-Round permanently etched graduations for 0 to 180 degrees in opposite directions 6-Inch adjustable protractor arm, Weight: 0.16 lbs., Manufacturer: General Tools

6" ruler at the protractor base for your convenience. Easily Measure from 0 to 180 Measurement read clearly in both directions.

Measure or transfer outside angles, inside angles, and sloped angles Can be used to make miter angle layouts Easy to read scale Tightening screw locks in any position Instructions for use included, Manufacturer: Big Horn

Brown & Sharpe 599-497-12 Bevel Protractor with Dial

Easy to measure all kinds of angle and draw lines Display always reads upright, no matter which way it is turned Lock the moving blade at any angle Aluminium fixing blade Includes durable carrying/storage case, Manufacturer: Denali

Protractor lets you plot any angle with ease and absolute accuracy T-Bar and see-through crosshairs provide perfect alignment 6-inch centering scale with micro-fine marking holes at every 1/32 inches Four angle scales, including one for marking narrow stock Micro-fine guide holes at every 45-, 30-, 22.5-, 5-, 1-, and 0.5-degree intervals, Weight: 0.24 pounds, Manufacturer: Incra

Measures angles (degrees) on curved surface. Needed to determine the bearing component of curvilinear measurements

12-Inch Tempered Steel Blade Direct reading 0 to 180 Degrees in opposite directions permitting the direct reading of angles and supplementary angles Reversible lock bolt allows choice of which graduated side of the blade faces the operator Protractor heads are made of stable cast iron and finished in attractive smooth black finish Tempered steel blades with accurate machine-divided graduations. A spirit level indicates when the base reference surface is level. Graduation is Quick reading 32nds, ...

18-Inch Tempered steel blade Direct reading 0 to 180 Degrees in opposite directions permitting the direct reading of angles and supplementary angles Reversible lock bolt allows choice of which graduated side of the blade faces the operator Protractor heads are made of stable cast iron and finished in attractive smooth black finish Tempered steel blades with accurate machine-divided graduations. A spirit level indicates when the base reference surface is level. Graduation is 8ths, 16ths. Quick Reading...

7-Inch miter saw protractor with two scales-red -Inchmiter cut-Inch scale and black -Inchsingle cut-Inch scale Allows direct transfer of the work angle to the miter saw in 3 steps with no calculations Features durable 1/4-Inch thick aluminum alloy and reflon O-ring for smooth, precise operation 12-Inch version also available to cover 7-Inch long; 1-1/2-Pound; 1-year warranty Ideal for carpenters, plumbers and all building trades Saves time and reduces waste Scale shows angle for a miter joint and...

Double graduations from 0 - 180 degrees in opposite directions permitting the direct reading of angles and supplementary angles The back of the tool is flat for ease of use The blade can be locked firmly at any angle by the lock nut Satin chrome finish for ease of reading and resistance to rust Double graduations from 0-180 degree in opposite directions permitting the direct reading of angles and supplementary angles, Weight: 1 pounds, Manufacturer: Starrett

Measures angles in any plane 0.1 degree resolution, accuracy, and repeatability Sets both miter and bevel angles Great for measuring and layout Strong magnets on all blade edges for ease of use, Weight: 0.79 lbs., Manufacturer: Wixey