1721 results for "Plunge Routers" between $10.00 and $350.00

Skil SEPTLS1141820 100% ball bearing construction for added durability. Auto-zero allows user to easily set plunge depth. Built-in worklight for better visibility and accuracy. Collet-Lock for easier bit changes. Micro-fine depth adjustment for precise cuts.

Our seven-part series on routers continues with everything you need to know about choosing and using a plunge router. With photos and illustrations.

Collet Size : 1/4 in, 3/8 in, 1/2 in. Cutting Depth : 3 in [Max]. Power Cap. : 3 1/4 hp [Max]. Voltage : 120.00 VAC. Frequency : 60.0 Hz. Amps : 15.00 AAC. Speed : 21000 rpm [Max]. Handle Type : Double Sided Hold. Control Type : On/Off. Type : Plunge Router.

Voltage 120 AC. Max HP 2.2. No Load Speed 10,000-24,000 RPM. Collet Dia 1/4 in.-1/2 in. Amps 13.0. Cord Type 8 ft. Fixed. Construction Type Double Insulated. Switch Type Rocker. Dial Speed Control Yes. Handle Style BodyGrip. Electronic Feedback Yes. Depth Adj Range 2-7/8 in. Sub Base Dia --. Height --. Tool Weight --. Shipping Weight 23.0 lbs.

Fully-enclosed & sealed springs on guide posts eliminate dust & clogging. Motor shaft w/lower bearing closer to work for minimum bit run-out, vibration. Self-releasing collet automatically frees bit when loosened. Contoured handles, trigger switch & lock button. Soft start provides 50 to 70% less reaction torque at start-up. Built-in overload protection protects tool from electrical failure. 10' rubber insulated power cord w/separate strain reliever. Quick-release plunge lever conveniently...

11 Amps, AC only, 27,500 RPM, 1/4" & 1/2" collets. Auto-release collet system ends "frozen" bits. Precision machined aluminum motor housing & base. Accurate micrometer depth-of-cut adjustment to 1/128"100% sealed ball bearings. Dust-sealed switch. Lever release height adjustment. Under table stop prevents motor from inadvertently rotating out of base. Standard Equipment: Router motor, base #1001, 1/4" collet #42999, 1/2" collet #42950, collet wrenches #42596, carrying case, plunge base #6...

Powerful 15 AMP motor delivers 22,000 RPM for smooth routing. 0" - 2-3/4" plunge depth capacity for easy penetration into work piece. Linear ball bearings for smooth plunge action and superior performance. Quick release plunge depth adjustment with micro control along with three preset depth stops for added precision. Oversized ball bearing construction for longer tool life. Ergonomic rubberized handles with built-in large two finger switch for added control and use. Conveniently located plunge...

Replacement/accessory Plunge Base for Porter Cable 450 and 450PK Compact Routers (#41766 and #41462). Lightweight, smooth-sliding plunge base has rubber handles, a five-step turret stop, and sliding depth-rod with micro-rod for fine adjustments.

Collet Size : 1/4 in, 3/8 in, 1/2 in. Cutting Depth : 3 in [Max]. Power Cap. : 3 1/4 hp [Max]. Voltage : 120.00 VAC. Frequency : 60.0 Hz. Amps : 15.00 AAC. Speed : 10000 rpm, 13000 rpm, 16000 rpm, 19000 rpm, 21000 rpm. Handle Type : Double Sided Hold. Control Type : On/Off - 5 Speed. Type : Plunge Router.

Micro-fine depth adjustment rings provide precise, quick depth adjustments in 1/64" increments and constant switch and cordset locations. Adjustable tool-free motor cam locks and quick release motor latches ensure easy depth changes, quick motor pack removal and solid base locking. Precision machined die cast aluminum bases, nickel plated, die cast aluminum motor housings, dust sealed switches and clear Lexan® sub-bases provide enhanced durability. Rubber overmolded handles and low center of gravity...

12.0 AMP, 2.25 HP, Variable Speed Craftsman Motor. Powerful 12.0 AMP permanently sealed, 100% front and rear ball bearing motor provides 2.25 HP with variable speed of 10,000-25,000 RPMs. Provides plenty of power to router or plunge through soft and hard woods or veneers and plastics. Heavy-duty gear box provides efficient power transfer to the router bit. Includes: Router, Plunge Base, 1/4 & 1/2 Collet, Sub Base, Collet Wrench, Depth Adjustment Wrench, Edge Guide, Vac Adapter, Screws and Soft Case...

* 11.0 Amp motor. * Operates at 8000 to 24000 RPM. * Maximum Horsepower 2.25. * Collet Capacities 1/2" and 1/4". * Plunge Capacity 2-19/32". * Model RF1101 Router. * Hex Wrench 4 (783202-0). * Plastic Tool Case (824648-2). * 2 ea. Wrench 27 (193234-3). * Wrench 8 (781213-9). * Clear Sub-Base (2-1/2" hole) (193155-9). * Plunge Base Assembly. * 1/4" Collet (193214-9). * 1/2" Collet (763643-6). * Powerful 11 AMP 2-1/4 H.P. Makita made motor. * Variable Speed Control Dial (8000-24000 RPM...

Plunge Base for Compact Router DWP611 - DNP612

Industrial Power Tools * Powerful 15.0 AMP motor delivers 9,000-22,000 RPM for smooth routing * 0" - 2-3/4" plunge depth capacity for easy penetration into work piece * Electronic speed control maintains constant speed under load * Variablr speed control dial enables user to match the speed to the application * Soft start feature for smooth start-ups * Electric brake for increased productivity * Linear ball bearings for smooth plunge action and superior performance * Quick release plunge depth adjustment...

Router Plunge 3 HP Plunge Router Power Rating 3 HP No Load Speed 8000-22000 RPM Current 120 VAC 15 Amps Power Source AC Switch Slide Tool Length 10 516 Inches Tool Weight 11.3 Pounds Includes Plunge Variable Speed Control Soft Start Spindle Lock 14 Inch and

Amana Tool's® Unique set of miniature router bits is comprised of twelve useful shapes, all carbide-tipped for extra long life. Designed to meet the needs of doll house enthusiasts, model makers, architects and professionals, they are ideal for producing a wide variety of small-scale moldings. Available individually, or as a set of twelve in a handsome wood storage box. All of our miniature router bits are furnished with 1/4" diameter shanks and work equally well in any router or trimmer with a ...

Black and Decker Plunge Router: Variable speed motor 8,000 -27,000 rpm 10-amp motor 3 easy to set turret stops Reduce set up time for repetitive depth cuts Sightline base Dust Extraction port Spindle Lock Cleaner work environment Enhances visibility of work surface Model number: RP250