99 results for "PH Tester" between $10.00 and $200.00

Automatic calibration with two sets of memorized buffer values for ease of use Replaceable electrode to prolong the life of the meter Automatic temperature compensation (ATC) eliminates need for extra calculations Stability indicator to prevent false readings Provides pH readings from -2.00 to 16.00 pH (+ or - 0.1), with a resolution of 0.01 pH

Martini pH55/Temp Tester and Probe IP67 Waterproof pH tester with large dual-level LCD that displays pH and temperature (°C or °F). The large display shows readings in an extended range from 2.0 to 16.0 pH and simultaneously shows temperature from 5.0 to 105.0°C or 23.0 to 221.0°F. This tester has a stability indicator and hold function that freezes the display for easy and accurate recording. Complete with a temperature probe for faster and more precise temperature measurement, this tester compensates...

Product photo may not exactly match the product offered for sale. Please refer to the product description. The Jenco 610 pH tester is a dip and read, easy to use pH pen. PH test strips often require users to match a colored strip to a color chart; Jenco's pH testers are more accurate than typical pH test strips. Calibration buffers and solutions are sold separately. Features Quick and simple pH measurements Single point calibration Operating temp.: 0 to 50 °C 4 x 1.5 V Batteries Primary Specs...

Milwaukee's economical testers are easy-to-use and low cost instruments to measure quick and reliable pH.

Automatic calibration at one or two points with two sets of memorized buffer values for ease of use Replaceable electrodes to prolong life of meter Automatic temperature compensation (ATC) eliminates need for extra calculations Waterproof and floats in water Automatic shut-off to extend battery life

Dual level LCD, Replaceable pH Electrode Cartridge, Automatic Caliibration

Quick Overview When HANNA® introduced its first version of the pHep (pH electronic paper) in 1986, it immediately revolutionized the standard in pH measurement. pHep's ease-of-use in combination with its affordability made it possible for non-technical and technical personnel alike to measure pH on the spot, accurately and inexpensively throughout a variety of industries. Since its introduction, over 1 million pHeps have gone to satisfied customers around the world.

To resolve the problem of frequent battery replacement, our R&D team has produced a meter that will run for 2000 hours continuously on common AA-type batteries (included). This translates into more than 2 years of continuous use up to 2 hours a day, seven days a week! Calibration has been simplified to one-point through a dial on the front of the meter. The outer casing also incorporates a molded eye so you can hang the meter when not in use.

Click to Enlarge Click to Enlarge Click to Enlarge Hanna InstrumentsWaterproof pH/EC/TDS/T Tester Model #HI98129 MSRP:$249.39 Brand Hanna Instruments Type Waterproof pH/EC/TDS/T Tester Minimum pH Range 0.00 Maximum pH Range 14.00 Minimum TDS 0.00 Maximum TDS 2000 ppm Resolution 1 uS/cm EC, 1 ppm TDS, 0.01 pH, 0.1 C, 0.1 F Accuracy (pH) 0.05 Accuracy 2% F.S. EC/TDS Minimum Temperature (C) 0 Minimum Temperature (F) 32 Maximum Temperature (C) 60.0 Maximum Temperature (F) 140 Maximum...

MW_PH51 pH51 pH Smart Tester - A water proof micro-processor based pen style meter with a replacable clog resistant electrode specifically designed for the aquarium market. 2 point manual calibration. Range: 0.0 - 14.0 pH. Resolution 0.1 pH. Accuracy: ? 0.1 pH. Electrode replacable MA73600 Complete with (2) 1.5v battery (1500 hours of continuous use) and 7.01 calibration solution. Environment: 0 ? 50?C / 100% RH. IP67 Waterproof casing. List Price

Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions. All EC/TDS testers compensate for the temperature variance automatically. The pH600 is a pH tester specifically designed for the aquarium market. The calibration procedure is very simple and fast. This tester has 1 point manual calibration, ±0.1...

Part number PH10. pHMeasurement range: 0.00 to 14.00 unitsResolution: 0.01 unitsAccuracy: ±0.1% ±0.1 unit within 10 °C of calibration. TemperatureMeasurement range: 0 to 100°C (32 to 212°F)Resolution: 0.1°C (0.2°F)Accuracy: ±0.3°C (±0.6°F). IP-67 waterproof housing. Automatic temperature compensation. User-replaceable single- or double-junction electrodes. 50-set memory (pH, temp, date and time stamp). GLP functionality (saves and displays last calibration data). 1, 2, or 3-point calibration...

Dual-level LCD. Replaceable pH Electrode Cartridge. Automatic Caliibration.

Dual-level LCD Replaceable pH Electrode Cartridge Automatic Caliibration

When HANNA® introduced its first version of the pHep (pH electronic paper) in 1986, it immediately revolutionized the standard in pH measurement. pHep's ease-of-use in combination with its affordability made it possible for non-technical and technical personnel alike to measure pH on the spot, accurately and inexpensively throughout a variety of industries. Since its introduction, over 1 million pHeps have gone to satisfied customers around the world.

Portable High Accuracy Pulldown PH Tester PH-010 (PH 0.00-14.00)

The HI 98130 Combo waterproof tester offer high accuracy pH, EC/TDS and temperature measurements in a single tester! No more switching between meters for your routine measurements. The waterproof Combo (it even floats) has a large easy-to-read, dual-level LCD and automatic shut-off. pH and EC/TDS readings are automatically compensated for the effects of temperature (ATC). This technologically advanced tester has a replaceable pH electrode cartridge with an extendable cloth junction as well as an...