223 results for "Kenwood subwoofer" between $50.00 and $350.00

Get the most sound out of your subwoofer with these installation accessories designed to make your subwoofers installation simpler and sound better. Within this category, you will find subwoofer boxes, sound dampening material, subwoofer grilles, speaker wire, connecters, and many more accessories. For all your installation needs, check out our expansive selection of car subwoofer installation accessories.

10" 4-ohm Component Subwoofer Carbon-glass fiber cone with butyl rubber surround,shallow-design basket,50-250 watts RMS power range

Pearl mica injection-molded polypropylene woofer cone. Tornado-type raised ridge construction for improved rigidity and dampened resonance. Foam surround. Extended pole piece and bumped back plate for increased cone excursion. power range 35-130 watts RMS. peak power 500 watts. frequency range 28-800 Hz. sensitivity 91 dB SPL. top mount depth: 4-1/2". sealed box volume 1.0 cubic feet. ported box volume 1.1 cubic feet. Shipping Weight: 12 lbs.

1200W Peak Power. 400W RMS Power. 4 ohms Impedance. 34Hz - 300Hz Frequency Response. 6" Mounting Depth. PP Cone with Diamond Array Pattern. Dual-Ventilation System. Rubber Surround Kenwood KFCW3013 :: Features Woofer Size (In.) 12" Max. Power Output (Watts) 1200 RMS Power Output (Watts) 400 Frequency Response 34Hz-300Hz Similar Best Sellers Kenwood 12" Car Subwoofer KFCW3013 In Stock! Ships in 24 - 48 Hours Was: $99.99 Instant Savings: -$25.27 (25%) Your...

A very good company to order from, good information, fast delivery all positive. A very satisfied customer. AAA. Thanks

Sensitivity: 90 dB. RMS Power Range: 50-300 Watts. Peak Power Handling: 1000 Watts. Impedance: 4 Ohm. Low Frequency response: 30 Hz. High Frequency Response: 1000 Hz. Stainless steel-coated polypropylene cone. High excursion rubber surround. Super linear spider. Double stacked magnet. Long stroke design. Sealed box volume: 1.0-1.5 cu. ft. Ported box volume: 1.25-1.75 cu. ft.

Kenwood 10 " Subwoofer Party Pack - PW1010/ 350 Watts Maximum Amplifier Power/ 700 Watts Maximum Peak Subwoofer Power/ 150 Watts RMS Power Output/ 8 Ohms Nominal Impedance/ 35Hz - 1000Hz Frequency Response/ High Quality Speaker Level Input/ Black Finish

Subwoofer textured polypropylene cone with rubber surround,power range: 50-300 watts RMS,frequency response: 39-300 Hz

The woofer size (diameter) was as expected, however, mounting it was a little difficult in my boat since the sub was deeper than I had expected (and thus would not work in the two places I had planned on mounting it due to its depth.) I've had it installed several months now and don't regret it....other than not having done this several years ago!! Obviously, if you are the type to install multiple amps, extra batteries, etc... this isn't for you, but if you just want a cheap, easy, and very effective...

6-1/2'' Concave Cone Drive Unit. 6-1/2'' Concave Cone Passive Radiator. Remote Controllable Variable Low-Pass Filter (50-120Hz). Remote Controllable Phase Reverse Switch. Dual Voice Coil.

KSC-W1200T+KAC-1502S, 12" Cylindrical Subwoofer, Peak: 1200 watts, RMS: 200 watts, Impedance: 4 ohm, cylinder design, MOSFET power supply, Preamp RCA and speaker level inputs

Kenwood 12 " Subwoofer Party Pack - PW1210/ 350 Watts Maximum Amplifier Power/ 800 Watts Maximum Peak Subwoofer Power/ 250 Watts RMS Power Output/ 4 Ohms Nominal Impedance/ 28Hz - 800Hz Frequency Response/ High Quality Speaker Level Input/ Black Finish

This optional grille for the eXcelon dual voice coil subs creates a nice custom look and can protect the woofer from damage. For use with the KFC-XW1222D, KFC-XW1224D, KFC-XW1200F, and KFC-X12R. Available in 12" (CA-WG12) or 10" (CA-WG10).

Subwoofer Carbon-glass fiber cone with butyl rubber surround,shallow-design basket,50-350 watts RMS power range

12" 4-ohm Component Subwoofer Carbon-glass fiber cone with butyl rubber surround, shallow-design basket, 50-350 watts RMS power range

Package Deal Includes: (2) Kenwood 12" dual voice coil subwoofers Atrend top of the line dual 12" vented sub enclosure 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal) 20 Feet of 14 AWG Blue Speaker Wire 4 Spade Terminals This is a complete dual 12" subwoofer package. This includes everything you need to install it in your vehicle. This package was put together by our top MECP certified audio engineer. This package is guaranteed to give you great...

12" subwoofer. Titanium-coated Deep Design cone with rubber surround. Sturdy steel basket. Rubber magnet cover. Power range: 90-380 watts RMS (190 watts per voice coil). Peak power: 1500 watts. Sensitivity: 93 dB. RMS Power Range: 90-380 Watts. Peak Power Handling: 1500 Watts. Impedance: Dual 4 Ohm. Low Frequency response: 25 Hz. High Frequency Response: 800 Hz. Mounting depth: 6-13/16".