5327 results for "Jigsaw Blades" between $2.00 and $150.00

Special Steel Jigsaw Blades for STS12/E & SS 115/E Jig Saw (Set of Two) Used for cutting hard and soft wood, plywood, fiberglass reinforced materials and various soft plastics. Especially designed for sawing tight curves and guaranteeing clean cuts. Alternately set and sharpened teeth.For use with Proxxon Jig Saw STS 12/E and SS 115/E Technical Data: Dimensions: 2 1/4" x 7/64" x 1/64" (57 x 2.9 x 0.5mm)Tooth pitch: 1/16" (1.5mm)

Amperage: 7.0. Bevel Angle Range: 45°. Country of Origin: Switzerland. Cutting Capacity- Soft Wood: 5-7/8". Cutting Capacity-Aluminum: 7/8". Cutting Capacity-Mild Steel: 3/8". Hertz: 60 Hz. Max. Bevel Cut: 45°. No Load SPM: 500-3,100. Rating: 120V. Stroke Length: 1". Weight (lbs.): 5.90.

OCB2428 Features: For fine, splinter-free cuts on both sides of workpiece Ideal for straight, fine cuts Splinter-free cutting through down cutting teeth Ideal for fast, straight cuts Ideal for parallel and angled cuts Ideal for jig saws without orbiting action For narrow curve cutting Ideal for straight, parallel cuts For curve cutting Ideal for fast, fine cuts For very fast, fine cuts Cutting Edge Material: Carbon Steel Shank Type: ''T'' Tang Shape: Straight Type: Jig Saw

Quick change open foot design improves visibility of cut lineDust blower keeps cut line clearTool-less blade change accepts both T and U shank bladesVariable speed dial Stroke Length = 1 in Voltage = 120.00 V Amps = 4.50 A Cycle Rate = 800 strokes/min [Min], 3250 strokes/min [Max] Cutting Cap. = 1 1/4 in (wood) [Max], 3/8 in (aluminum) [Max], 3/16 in (mild steel) [Max] Cutting Cap. 2 = 1-1/2 in. @ 45�, 2 in. @ 90� Control Type = 2-Finger Trigger Bevel Cap. = 45� [Max] Cord Length = 6 ft...

Dewalt Jig Saw Blade (Dw3755h). 4", 8 TPI T-shank High carbon steel For cutting aluminum and fiberglass Card of 5

OCB2438 Features: Ideal for straight, fine cuts Straight cuts For thin material For thick material Ideal for aluminum Ideal for straight, parallel cuts For curve cutting Cutting Edge Material: Bi-Metal Shank Type: ''T'' Tang Shape: Straight Type: Jig Saw

Jigsaw consists of keyless blade change system that accepts universal and t-shank blades. The tool-free adjustable shoe slides forward, backward, and bevels 45 in both directions. It has a 3-position orbital action with unique counter-balance mechanism. The jigsaw has a variable speed trigger 0 to 2000 SPM for greater control and faster cutting. A dust blower keeps line of cut clear of chips. (Does not include battery or charger).

Bosch has designed a blade for every cutting application in wood, plywood, particleboard and laminated board. Whether you are looking for splinter-free operation, smooth curves, speed or rough cuts, Bosch has designed and developed the right tooth configuration for the job

OCB2433 Features: For fine, splinter-free cuts on both sides of workpiece Ideal for straight, fine cuts Splinter-free cutting through down cutting teeth Ideal for fast, straight cuts Ideal for parallel and angled cuts Ideal for jig saws without orbiting action For narrow curve cutting Ideal for straight, parallel cuts For curve cutting Ideal for fast, fine cuts For very fast, fine cuts Cutting Edge Material: Carbon Steel Shank Type: ''T'' Tang Shape: Straight Type: Jig Saw

OCB2434 Features: For fine, splinter-free cuts on both sides of workpiece Ideal for straight, fine cuts Splinter-free cutting through down cutting teeth Ideal for fast, straight cuts Ideal for parallel and angled cuts Ideal for jig saws without orbiting action For narrow curve cutting Ideal for straight, parallel cuts For curve cutting Ideal for fast, fine cuts For very fast, fine cuts Cutting Edge Material: Carbon Steel Shank Type: ''T'' Tang Shape: Straight Type: Jig Saw

18V Jig Saw (bare)

The DEWALT Heavy-Duty XRP 18V Cordless Jig Saw with Keyless Blade Change has an all-metal lever-action keyless blade change for quick and easy blade changes. All-metal k...

* Overall Length: 4". * Working Length: 2.83". * Blade Height: 0.28". * Blade Thickness: 0.05". * Teeth Per Inch: 14. * Material: HSS. * Tooth Design: Ground teeth and taper ground back. * Type of Cut: Fine & straight cuts. * (5) Blades. * Specialty blades should be cooled with water and used only with GFCI protected outlets or adapters. * T-shank blades are suitable for jig saws from Bosch, AEG, Dewalt, ELU, Hitachi, Makita, Metabo, Milwaukee and others (sold separately). * Bosch is the...

Milwaukee Bi-Metal Jig Saw blades are designed and manufactured for the professional user. Bi-metal blades last longer than high speed steel or carbon blades. Detail to the material used, tooth shape and sharpness make these blades cut clean, fast and have a longer life. This blade has uses T-Shank and fits Milwaukee Jig Saws 6266-6, 6276-6, 6267-20, 6267-21 and other popular brands

Makita SEPTLS45872301232 Jig Saw Blades - 723012-3-2

Jig Saw Blade U Shank 14 TPI 3 L Pk 5 Jig Saw Blade Bi-metal Shank Type U 14 Teeth per Inch Length 3 In Design Tooth Ensures Precision Cutting Long Life Cutting Up to 38 In Steel and 319 In Soft Metal Thick Metal Cutting Package 5

If you're looking for high performance and straight cuts, look no further than Bosch to deliver! These 4" Jig Saw Blades are ideal for miter, straight or curved cuts. Compatible with Bosch, DEWALT, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jig saws.

The 12704-5 Features: * Cuts wood and soft materials * 3 inches long * 12 teeth per inch for smooth cutting * Five pack * One year warranty/30-day performance certificationSpecifications: * Qty: 5 * Teeth per Inch: 8 * Blade Length: 3" * Blade Material: HCS * Suggested Use: Scrolling in wood & soft materials * Tooth Type: Mill Set The 12704-5 Features: * Cuts wood and soft materials * 3 inches long * 12 teeth per inch for smooth cutting