121 results for "Insulated Spark Plug Boot Puller" between $2.00 and $50.00

Spark Plug Boot Puller, Length 5 3/4 In, Works With All Gasoline Engines, For Use With Spark Plugs, Material Carbon Steel

The Alltrade 648423 is a Spark Plug Boot Puller. It is used for pulling a boot off of a spark plug. The compact, L-shaped boot puller pulls boots from the base to avoid damage to the wire connection. Features: Rubber Coated Handle Fits most applications What's in the Box: Alltrade 648423 Spark Plug Boot Puller

Description The T-handle will give you all the pulling power needed to remove and replace even the toughest spark plug boot. Helps avoid damage to the wire connectionCan be used with metal or rubber bootsDesigned for one-handed operation Shipping Weight: 0.10 lb.

W 3.5L The rubber spark plug boot/wire is recessed in the head and clearance around the O.D. is limited. Use of standard tools such as needle nose pliers can tear the boot. J 43094 is a pliers type tool that pilots in the I.D. and fits between the O.D. and the bore to engage on the shoulder of the boot . Push the pilot tip of the tool into the boot while simultaneously forcing the pulling feature of the tool past the O.D., close/compress the pliers handle to pinch the boot, then pull.

This unique specialty tool has been designed to easily remove “ripped” and “stuck on” spark plug boots where there is no access to grab the boot for removal. In usage, this tool goes down in the confined space of the spark plug hole and with hand pressure separates the stuck on piece of rubber boot from the porcelain part of the plug. This spark plug boot tool then slides out with the damaged boot leaving the spark plug exposed and easily removed. Made from quality heat treated steel, this tool...

For quick and easy removal of spark plug boots without damage. Keeps hand away from hot manifold. Made of heat-treated steel with vinyl grip.

For General Motors. W 3.5L The rubber spark plug boot/wire is recessed in the head and clearance around the O.D. is limited. Use of standard tools such as needle nose pliers can tear the boot. J 43094 is a pliers type tool that pilots in the I.D. and fits between the O.D. and the bore to engage on the shoulder of the boot . Push the pilot tip of the tool into the boot while simultaneously forcing the pulling feature of the tool past the O.D., close/compress the pliers handle to pinch the...

Long reach to grab down to the bottom of the spark plug boot. Tips have a gripping ledge to go under the spark plug boot. Tips have a vertical ribs to grip the spark plug boot to help break it loose. Swivel design for any angle of approach which allows the use of a lever block to pop the spark plug boot off. This tool works on all types of vehicles.

This tool works on 1.8L 4 cylinder turbo VW and Audi 1998-2006; 2.0L 4 cylinder VW 1993-2005; 2.0L cylinder turbo VW and Audi 2006 and later.

Schley Products 65350. SLY65350. SLY-65350. SLY 65350. SP65350. SP 65350.

Thexton Manufacturing specializes in automotive testing tools, diagnostic equipment and professional automotive specialty tools for auto mechanic technicians - that's what Thexton designs, manufactures and supplies for you! Thexton also manufactures coolant and battery testers. With over 50 years of technological backing & our vast product line of specialty tools Thexton is able to take care of difficult problems for technicians.

S-K Grabbers™ feature SureGrip® tips that allow you to break loose rubber or metal boots from plugs with just a twist of the wrist.

The VW and Audi steel spark plug boots are designed to seal and increase contact between the spark plug and spark plug wire. With the increased seal and location of the boot, a special tool has been developed to access and remove the spark plug boot. The Tool is also needed in snapping the spark plug boot onto the spark plug that is in a very confined area. This spark plug boot tool was designed in hardened stainless steel for long term service for the professional technician. The "T" handle...

SureGrip tips that allow you to break loose rubber or metal boots from plugs with just a twist of the wrist.

SE Tools 824A spark plug boot pliers are all metal-framed, self-locking, vinyl grips, heat-treated steel, rust-preventing, zinc plating or black oxide. Interchangeable swivel tips.

Straight Jaws access spark plug boots where the offset jaws cannot perform. Spark plug pliers protects against plug wire and boot separation.

Extended, heavy-duty, 90 degrees off-set. Vinyl-coated jaws and handles assure gripping ability. For use on automotive-type ignition systems. Reaches those hard to access spark plug boots. Made in the U.S.A.

This 10-inlong reach spark plug boot pliers is designed to remove hard to reach spark plug boots Double insulated to give complete protection from shock Handles and jaws are double dipped to assure complete coverage of all contact areas Also can be used for light bulb removal