2758 results for "Floral Supply Kit #5" between $10.00 and $450.00

Basic Floral Tools. One stainless steel flower stem stripper. Typically used for rapid removal of leaves and thorns from fresh cut roses. One stainless steel floral cutter use to cut flower stems and floral wire.

The Whirlpool Refrigerator Water Supply Kit 8212547 provides water to ice makers, ice and water dispensers, freestanding ice makers, humidifiers, and evaporator coolers, and is compatible with many brands of refrigerators. This Whirlpool refrigerato

Ventergy BVS 200 Blending / Filtering Ventilator & Accessory Kit (25 754) - This is a fresh air system - not necessarily an exhaust system. This kit mixes fresh outdoor air with air from four bedrooms - then filters the air and distributes to two supply ports in the living space. The BVS Blending Ventilators are designed to provide fresh outdoor air blended for tempering, with indoor air drawn from bedrooms or areas typically not served by a central thermostat, before filtering and distributing...

Mountain Plumbing MT3045/ORB Universal Oil Rubbed Bronze Lavatory Sweat Supply Kits W/ New England/ Massachusetts P-Trap

Wolo Lightning Plus 6 Bulb Strobe Kit with 120-Watt Power Supply - 4 Super Bright Clear & 2 Blue Strobe Bulbs / - Wolo's Lightning Plus 6 Strobe Light Kit has six super-bright strobe lights for use in headlights, side markers, and taillights. They are the perfect choice for fire, rescue, police, ambulance, and construction workers alike when they need a powerful, hidden, warning light system. -- Make: -- Model: -- Years: 0

Ready Fit Retro Fit Kit 5 FT READY FIT T5 AQUARIUM FIX NEW! Easily mounts with 4 screws. Features major brand ballast. Purchase your choice of lamps separately. Patent Pending. 1 Year Warranty. The Ready Fit T5 is a retro fit kit taken to the next level. It comes completely assembled with TEK reflectors waterproof end caps and a 8 power cord. The housing is made from rust proof aluminum. Simply mount the Ready Fit T5 into your canopy and it is ready to go. Manufacturer s Product Information 2...

Cotton or polyester blend prestamped fabric Floss and needle not included Delicate floral and butterfly design Finished dimensions: dresser scarf - 14-inch by 38-inch & 2 doilies - 12-inch round Complete instructions included

This will fit the Upright Bosch vacuums.

Pictured in polished stainless steel ZMT1498 Features: Bathroom supply kit with cross handle 0.5'' Compression Includes: Includes two angle valves, two low pattern flanges, two rigid supply tubes, one p-trap and one high box flange Options: Available in several finishes Dimensions: Rigid Supply Tube Dimensions: 20'' H x 0.375'' W x 0.375'' D P-Trap dimensions: 1.5'' H x 1.5'' W

This fantastic power supply goes from 5 to 24 volts and is regulated. At 5 volts it gives about 300 milliamperes and goes up 1 ampere at 24 volts. You can use this power supply on your repair bench to power a device that requires a regulated voltage. Add some meter faces to make it fancy and it will last for years. . Easy to build and maintain. Comes with complete instructions.

Custom-fit Carburetor Repair Kits For '75 - '85 Honda Goldwing Replace Only Corroded Or Badly Worn Parts Instead Of Buying A Costly New Carburetor! Includes Parts Required To Repair One Original-equipment Carburetor (all Gaskets, "o" Rings And Jets) For '75-85 Gl1000, Gl1100 And Gl1200 Models Dirt And Contaminated Fuel Can Damage Parts And Result In Poor Carb Performance (hard Starts, Rough Idle, Stalls) And Poor Fuel Economy. Kits Make It Easy To Restore Carb To Original Performance Levels.

Herbeau 049152 1/2 Inch Ips Lavatory Supply Kit With Cross Handle In Old Gold (Lacquered)

Newport Brass Toilet Supply Kit1/2" Compression x 3/8" O.D.Includes (1) 403-1: 1/4" Turn Ceramic Disk. Angle Valve, Contemporary Style with Lever handle. Inlet 1/2" Compression. Outlet 3/8" Compression.Includes (1) 436: 3/8" O.D. x 20" Flat Head Rigid Supply TubeIncludes (1) 441: Brass Flange, Sure Grip, For 5/8" O.D., Same as 1/2" Compression, 5/8" I.D. x 2-1/2" O.D. x 13/32" HT

Faucet Supply Kit, 1/2 inch Faucet Shank Nuts, Chrome Plated Brass, 3/8 inch Outer Diameter Cone Washers, Kit Contains 2 Each: Brass Nuts and Cone Washers and 4 Brass Washers, Carded.

Accuracy: <0.50% Full Scale. Temp Drift: <0.50% Full Scale. Stability: <0.25% Full Scale/Year. Operating Temp: -40C to 105C. Burst Pressure: 5 x Full Scale. Response Time: < 1mS. Wetted Materials: 304L & 316L Stainless Steel. Vibration: 20G’s peak to peak sinusoidal. Weight: <85g. Supply Current: 5mA MAX. at 5 Vdc. Elec. Termination: Integral weatherproof connector, includes mating connector with 12” leads, 1Red (Supply Voltage, 4.7-7.0 Vdc), Black (Ground), Green (Output.

Keeping live aquatic plants in your home or work environment can be quite a fascinating and visually rewarding hobby. Collecting and growing plants such as java ferns or water wisteria brings the richness and verdancy of natural plant life right to you.The Fluval Flora Aquatic Plant Kit is equipped with everything you need to create the ideal aquatic environment for natural plants.A key component in the kit is the CO2 supply system. The Aquatic Plant Kit includes a reliable Mini CO2 system to ensure...

Newport Brass Toilet Supply Kit with Cross Handle1/2" IPSIncludes (1) 400X: Angle Valve with Cross Handle, Inlet 1/2" IPS, Outlet 1/2" O.D. CompressionIncludes (1) 434: 1/2" O.D. x 20" Flat Head Rigid Supply TubeIncludes (1) 442: Brass Flange, Sure Grip, For 1/2" IPS, .84" I.D. x 2-1/2" O.D. x 13/32" HTIncludes (1) 450: 1/2" IPS x 4" Brass Nipple