36 results for "Evenheat Hot Box Kiln" between $25.00 and $3,000.00

Product Information: Kiln: - Evenheat - Hot Box With Window, - Handy little kiln for doing fusing, slumping, & manipulation. Firing Chamber: 6" L. x 6" W. x 4-1/2" D. Max. Temp.: 1800ºF. Cu/Ft.: 0.10. Volts: 120V. Amps: 12. Watts: 1440. Min. Wire Size: 12. Fuse Size: 20A. Receptacle: NEMA 5-15R. Features: - Rugged construction of metal & firebrick provides longevity & easy element replacement, - User friendly with its ease of use, - Pyrometer & power control included, - Window allows seeing...

And even though it's easy, the Set-Pro isn't limited by pre-set, "in-the-can" programs. This means you have complete control, AND you can fire glass from all glass manufacturers, at all different temperatures. This added flexibility is particularly valuable as you move from beginner to a more experienced level. 14.5" x 6.5" firing chamber. See specifications for full product details. Includes a 16" stand.

The kit includes the crucible kiln, 4 8lbs crucibles, 20 Uroboros billets 90 COE, "Paper Weight Techniques" a 2 part VHS tape on the use of the crucible to make paper weights, and two punty rods (1/2, 3/4 inch). All this for $1200

Description: Kiln is new, box removed/replaced only once to take photos, was given this kiln a year ago as suprise gift, but it's the wrong kind of kiln I need. Has been stored in detached art studio since, but now need the space. Kiln comes with layer of shelves, and RampMaster 2 installed and ready to go. Just needs to be pre-fired once and is ready to rock and roll. EvenHeat brand, is one of thier most popular. Large size good for a serious slumper. You can contact me at: killians@postinbox.com

The Set-Pro is not limited by pre-set programs. Not only does this give you complete control, it also allows you to fire glass from all glass manufacturers. As you move from beginner to a more experienced level this added flexibility is worth its weight in gold. NOTE: IF WE DROP SHIP THIS KILN TO YOU, SHIPPING WILL BE CHARGED ACCORDING TO THE ACTUAL WEIGHT AND DISTANCE TRAVELLED, NOT ACCORDING TO OUR SHIPPING CHART.

attached stand,. two peephole plugs,. instruction manual,. and warranty card. One-year warranty.

Designed to Fit. Front Access. Top Access. Wonderful Handles. Wall-Free Design. Set-Pro Control. Multi-Position Lid Vent. Engineered Element Path. Corner Mounting Technique. Bench Top Operation. Floor Stand Included. Power Cord Exits to Rear. Properly Sized Stand.

The chamber, which is 8" x 8" (floor area) x 6" high, permits the firing of moderate sized PMC pieces as well as other materials such as glass or enamel. Computer controlled, the E360 is preprogrammed to fire both PMC Standard and PMC+, having settings for both a fast and slow firing sequence. The digital display, angled for easy viewing, indicates the firing sequence being used as well as chamber temperature and remaining time in the hold period. The temperature and hold time settings in each...

Designed from the ground up with useful features like our 25 tooth mandrel rest, 7-1/2" deep chamber, cool-touch handle and our very unique and wonderfully useful Mandrel Crown. The Fishbone represents the ultimate in annealer design.

Cone 10 Series S18H These kilns are built of brick with extra thickness, rather than added wattage to provide additional strength while maintaining optimum efficiency. These kilns fire consistently to cone 10, as well as with increased efficiency at lower temperatures.

The factory is located in Caseville, Michigan. (north of Detroit). Evenheat Kilns are of the Highest Quality and are Individually Built to your Specifications. So please Allow 3-4 Weeks for your Kiln to be Delivered.

Evenheat has taken this popular studio sized kiln and added the fully automatic RampMaster II controller. The result is a kiln with size, power and precision firing characteristics needed in today's studio's. Operation is absolutely simple.

Maximum Temperature 2200° F - Cone 5-1/2. Temperature Regulated by Manually Set 3-Position Switch (See Below). 2-1/2" Thick Fire Brick Throughout with Full Stainless Steel Jacket - Stand Included. 120 Volt 18 Amp Household Current. 2160 Watt U/L and CU/L Listed. Requires Special NEMA 5-20R Receptacle (see below).

Fires Ceramic Materials to a Maximum Temperature of 2300°F, Cone 8, on a DAILY Basis. Has Excellent Temperature Distribution. RampMaster 2 Digital Automatic Control is Easy-to-Use & Provides Total Control Over the Firing Process. 2.5" Fire Brick Construction Throughout with Full Stainless Steel Jacket. Standard Features Include 8"H Stand, Extra-Wide Lid Handle, 2 Position Lid Vent, Swing-away Peephole Cover & Lid Security Bar. 240 Volt, 18 Amp, 4320 Watt - Requires Special NEMA 6-30R Receptacle...

Maximum Temperature 2300° F - Cone 8 Max. Temperature is Manually Set by Two 3-Position Switches (See Below). 2-1/2" Thick Fire Brick Throughout with Full Stainless Steel Jacket - Stand Included. 240 Volt 30 Amp 7200 Watt U/L and CU/L Listed. Requires Special 6-50R Receptacle (see below).

Maximum Temperature 2300° F - cone 8 Max. Temperature Regulated by 3 Manually Controlled 3-Position Switches. 2-1/2" Thick Fire Brick Throughout with Full Stainless Steel Jacket - Stand Included. 240 Volt 45 Amp 10,800 Watt U/L and CU/L Listed. Requires Special NEMA 6-50R Receptacle.