186 results for "Dual Action Air Sander" between $25.00 and $200.00

Professional touch lever Built-in power regulator to control speed Balanced ball bearing construction Front exhaust, Weight: 4.2 lbs., Manufacturer: Ingersoll Rand

Disk Size: 3-Inch; 4-1/2-Inch; 5-1/2-Inch 10,000 RPM No load speed; Built-in regulator for speed control Air Consumption: 4 CFM Maximum air pressure: 90 PSI; Standard 1/4-Inch air inlet Minimum hose size: 3/8-Inch diameter, Manufacturer: Maxworks

Dual Action Air Sander, 6 inch Diameter, Grab and Go Kit, Kit Includes: Dual Action Sander, 8 Sand Paper, 1/4 inch Steel Male Plug In A Blow Molded Case, Built In Regulator For Speed Control, 10,000 RPM, 10.0 CFM at 90 PSI, Works With Any Adhesive Backed Paper, 1 Year Limited Warranty.

Pneumatic Sander, Geared Dual Action - General-duty, Pad Size (in.) 8, Arbor Hole (in.) - , Spindle Size (in.) -, Free Speed (rpm) 825, Average Cfm @ 15 Second Run Time 4.0, Cfm @ Full Load 16.0, Required Pressure (psi) 90, Air Inlet Npt (in.) 1/4, Min. Hose Size (in.) 3/8, Length (in.) 12, Side Exhaust Type, Variable Speed No, Composite Handle Material, Composite Housing, Lever Throttle, For Heavy Material Removal Or Sanding Large Surfaces, Includes Built-in Power Regulator, Large 8 In. Pad

Also known as: ND EZLS-6, ND EZLS6, NDEZLS6, NDT-EZLS-6, NDTEZLS-6; EZLS-6Lightweight Long stroke DA SanderFeatures and Benefits:Not just another sander... The EZLS has longer orbit, runs smoother, is lightweight and quiet.BEST for Feather edging, Stripping, Block Sanding... Light, Smooth and aggressiveWill sand equally well with 3",5", or 6" pads without changing counterweights.Ergonomic long handle with soft grip for comfort.Speed control for optimal performanceLow air consumption and low noiseHigh...

Air Consumption (CFM): 4. CFM at Load: 17. Speed (RPM): 10,000. Pad Diameter (in.): 6. Random Orbital: No. Variable Speed: Yes. Side Handle: No. Vacuum Ready: No. Air Inlet Size (in. NPT): 1/4. Min. Hose Size (in.): 3/8. Case Included: No. Manufacturer Warranty: 12 months parts / 12 months labor. Ship Weight: 4.5 lbs. Item#: 1540328.

The Apprentice Dual Action Air Sander picks up where traditional power sanding leaves off. The high speed orbital action of this sander produces a super smooth finish while eliminating swirls and scratches typically left by power sanders. For optimum results, sand with the lathe turned off, rotating the piece by hand while you sand. This allows you to see the results as you go and to address problem areas. The Apprentice Dual Action Sander features gear-less construction, a large variable speed trigger...

Always wear appropriate eye protection. Do not exceed 90 psi (6.3 bar) of tool inlet air pressure. Do not force tool or exert side forces on pad while sanding. Wear appropriate respiratory protection. Always disconnect tool from air supply when changing discs. ONLY use 6" PSA (pressure-sensitive adhesive) sanding discs and backing pads rated for a minimum of 10,000-RPM use. Always make sure the workpiece being sanded is securely clamped or anchored.

* 10,000 RPM. * Built-in air regulator. * Includes vinyl faced 6" sanding pad (for PSA abrasives). * 11-13 CFM air consumption (4.0 average SCFM). * Weight: 4.7 lbs.

Pneumatic Sander, Geared Dual Action - General-duty, Pad Size (in.) 8, Arbor Hole (in.) - , Spindle Size (in.) -, Free Speed (rpm) 825, Average Cfm @ 15 Second Run Time 4.0, Cfm @ Full Load 16.0, Required Pressure (psi) 90, Air Inlet Npt (in.) 1/4, Min. Hose Size (in.) 3/8, Length (in.) 12, Side Exhaust Type, Variable Speed No, Composite Handle Material, Composite Housing, Lever Throttle, For Heavy Material Removal Or Sanding Large Surfaces, Includes Built-in Power Regulator, Large 8 In. Pad

* Sanding Body Filler. * Shaping. * Paint/Rust/Scale Removal. * Forming. * Feather Edging.

Details Low vibration Dependable performance Balanced ball bearing construction Adjustable built-in regulator for positive speed control A built-in silencer muffles noise as you work with this economical dual action sander. It's a quality sander used for feather edging, metal preparation and finish work on body filler. The dual action pad motion produces swirl-free finishes.

Compact and lightweight. Accepts 6" PSA sanding discs. Large paddle switch. 10,000 RPM free speed. 4 CFM average air consumption. 90 PSI recommended air pressure. 1/4" NPT inlet. Includes male quick connect coupling and lubricating oil.

Pneumatic Sander, General Duty, Dual Action, Pad Size 6 In, Arbor Hole 5/16-24 In, Free Speed 9000 RPM, Average CFM @ 15 Second Run Time 3, CFM @ Full Load 21, Required Pressure 90 PSI, Air Inlet NPT 1/4 In, Min Hose Size 3/8 In, Length 8 1/2 In, Front Exhaust Type, Aluminum Housing, Lock Off Lever Throttle, Includes 6 Inch Vinyl Face Pad

Eastwood's 6 Pneumatic Dual-Action Sander produces swirl-free finishes while you use less elbow greaseJust push the lever down and let the random dual sanding action of this Eastwood-engineered Air Sander do its thing feather edging, metal preparation, and finish work on body filler. Produces a smooth, no-pattern finish, with less manual labor on your part.10,000 rpmAdjustable speed controlTakes 6 discs with pressure-sensitive adhesive (PSA) backingsRequires just 2.8 cfm at 90 psi so you can use...

Use as a rotary OR orbital action sander by just setting the eccentric lockout! Air Consumption (CFM): 4, CFM at Load: 3, Speed (RPM): 7,000, Pad Diameter (in.): 5.5, Random Orbital: Yes, Varia...