24 results for "Dr. Zooch Mercury Redstone" between $10.00 and $250.00

Pencil. Ruler. Scissors. Masking Tape. Hobby Knife. Wood Glue or 5-Minute Epoxy.

Next I tackled the PE parts. After carefully cutting the parts from the trees with my modeling nippers, I sanded the tiny tabs left from cutting off with a file. Next I used two exacto knives to carefully bend the parts to the correct shape. Holding the part down with one knife along the fold lines, I pulled up and bent the part with the other. Once the correct alignment was achieved the part was glued to itself with superglue and a touch of accelerator. The prepainted rocket motors and fuel cell...

The Mercury-Redstone Launch Vehicle was the first manned launch vehicle developed by the United States. It was used to launch the sub-orbital flights of Project Mercury that ultimately led to the first U.S. human spaceflight.

I could not see a porthole. In a major inaccuracy, the sides at the bottom of the capsule are vertical for 4.5 mm, where they should be at an angle next to the heat shield. Strangely, the instructions don't show this vertical part! This was probably done so as to fit the seat and astronaut. If the capsule is glued to the Redstone, these sides would become the adaptor section, which is not part of the spacecraft. My recommendation would be to glue the capsule to the Redstone and fill in and smooth...

The Mercury Seven was the group of seven Mercury astronauts picked by National Aeronautics and Space Administration in April 1959. They are also referred to as the Original Seven and Astronaut Group 1. This was the only astronaut group with members that flew on all NASA manned spacecraft of the 20th century, including the Space Shuttle with John Glenn's flight on STS-95. The astronauts wrote first-hand accounts of their selection and preparation for the Mercury missions in the 1962 book We Seven...

Resin cast capsule measures approximately 7 inches in height (17" with escape tower) and features surface details that include:

1/72 Redstone Rocket w/Mercury Spacecraft (Space) Your Price: $54.95 Back Ordered

DescriptionThis is a detailed, textured model of the NASA Mercury 'Liberty' capsule with Redstone delivery system. Capsule interior and controls are included, as well as most internal components to the Redstone. Bonus 'Friendship 7' texture is included. Note Friendship 7 was launched atop an Atlas.TexturesDetailed bump and color maps are provided. All texture maps are available as layered Photoshop composite files, allowing you to re-mark or weather as needed.HistoryMercury 4 was a Mercury program...

Mercury-Redstone 2 (MR-2) Launch with chimpanzee Ham, the first primate in space.

Mercury Redstone photo of astronaut Virgil I. 'Gus' Grissom, pilot of the spacecraft, Liberty Bell 7 arriving aboard the recovery ship, U.S.S. Randolph, following his 15 minute 37 seconds suborbital space mission.

Mercury Redstone 3 MR-3 photo of astronaut Alan Shepard in his silver pressure suit as he prepares for his launch. Shepard was the first American to fly into space. His Freedom 7 Mercury capsule flew a suborbital trajectory lasting 15 minutes 22 seconds.