669 results for "Descenders" between $10.00 and $250.00

Fisk Descender is the simplest, most effective descent control system ever designed-it's easy to trust a system designed for durability, thermal capacity and smooth flow Gentle flow 19-Inch of working line to pass through the descender Large radius for smoother descent Less wear to the working line Reduction in rope hockling and torsional twist, Manufacturer: DBI/Sala

The Robot Descender from Kong is a multi-purpose device ready to accommodate your climbing needs. You never risk to lose your Robot because you can insert and disconnect the rope without any need of detaching it from your harness.

Descender with three braking positions, designed for use with canyoning descent techniques. FeaturesThree different braking positions to choose from before beginning descent depending on the users weight, the ropes diameter and the terrain. Two supplementary braking spurs allow friction to be increased during descent. A carabiner with a cross section of 12 mm like an ATTACHE provides a tight fit in the small hole, creating a rigid carabiner descender unit stays securely attached to the harness during...

Originally designed for caving, the Stop Descender is a device that stops or considerably slows descent when the handle is released.Locking mechanism can be disabled with a carabiner when a hand is needed to negotiate a dropHandle is squeezed to descend normally, controlling speed with the other hand; slack rope can easily be taken upAll control surfaces are stainless steelWorks best with clean, flexible rope, stiff rope may result in greatly impaired or reduced friction and the stop feature may...

Suede webbing for support and stability. Compression molded Techlite midsole for lightweight cushioning and comfort. Internal TPU shank for torsion control. Full length Omni-Grip outsole for all terrain traction. Weight: size 9 ½ pair = 10.3oz/292g. Imported.

This descender is very popular because the ears keep rope from binding (hitching). Made of aluminum and has a tensile of 45kN (9,900 lbs) with a 900 lbs safe working load for personnel support. Always use gloves when using these devices.

Descender/belay Small, Self-braking W/anti-panic Function, Length (in.) 8.858, Height (in.) 2.362, Width (in.) 3.543, Max. Working Load (lb.) 550, Tensile Strength 3150 Lbs, Aluminum/steel, Gold, For Use With 7/16 In Rope Size, Rope Access, Rescue, Work-at-height, Standards Nfpa L

The Petzl Huit Antibrulure is a figure-eight descender with anti-burn grip for descending on single or double rope.

When rappelling long distances, carrying or lowering heavy loads, or doing high angle work, you need a rappel device that has autolocking capabilities. The Indy will lock off when you let go of the rope, or when you use the brake lever. The Indy can also be rigged to lower heavy loads. Catalog Number: 195189 Item Title: KONG Indy Descender

Descender/belay Large, Self-braking W/anti-panic Function, Length (in.) 8.858, Height (in.) 2.362, Width (in.) 3.543, Max. Working Load (lb.) 600, Tensile Strength 4950 Lbs, Aluminum/steel, Red, For Use With 1/2 In Rope Size, Rope Access, Rescue, Work-at-height, Standards Nfpa G

Transition between heights is instant, similar to shifting. Flick the seatpost mounted knob and sit on the saddle to drop it, release the knob and it locks down in place. Do the same again and it pops back up

Descender W/ Braking Bars,variable Friction,release Type Friction Bars,material High Strength Aluminum,for Use With 9mm To 13mm Double And Single Rope,standards En 1891

Details Petzl Huit Descender Figure 8 Figure 8 descender For descending on single or double ropes. * Square shape to reduce twisting of the ropes and formation of a lark's head hitch * High strength forged aluminum * Small hole can be used with thin ropes if necessary, or as a belay plate Specifications Weight: 100 g Material: aluminum For use on ropes between 8 and 13 mm in diameter Note: For your safety and the safety of others, we cannot accept ANY exchanges or refunds on climbing...

Originally designed for caving, the Petzl Stop Descender is a device that stops or considerably slows descent when the handle is released Locking mechanism can be disabled with a carabiner when a hand is needed to negotiate a drop Handle is squeezed to descend normally, controlling speed with the other hand slack rope can easily be taken up All control surfaces are stainless steel Works best with clean, flexible rope, stiff rope may result in greatly impaired or reduced friction and the stop...

The Petzl Huit is a forged aluminum figure 8 descender designed for ropes with 8 mm. to 13 mm. diameters. Return Policy: Climbing equipment sales are final. In order to guarantee the life saving integrity of the climbing gear we sell -- we cannot accept returns on any life safety climbing or mountaineering equipment.

Self-braking descender belay device with anti-panic function. For descending a rope and for belaying, with an anti-panic function. Anti-error safety catch to reduce the risk of an accident due to incorrect installation of the device on the rope. The shape of the cam is designed to improve rope glide when ascending. Anti-panic function is engaged if the user pulls too strongly on the handle: brakes and stops the descent automatically. Locking position on the handle for positioning while on the...

Seatpost knob controlled, height adjustable seatpost drops the seat for descents and returns the seat to the rider's set height for climbing. Transition between heights is instant, similar to shifting. Flick the seatpost mounted knob and sit on the saddle to drop it, release the knob and it locks down in place. Do the same again and it pops back up. Made from 7075 T-6 aluminum with magnetic actuators. 468g (27.2 x 375mm).

"Winged 8" with ears on the side simplifies tying off. Made of aluminum. Maximum tensile load: 22kN/4946 lb. Mfr's Lifetime Warranty. Import. Wt: 7.4 oz.