24 results for "CLEAN & SEAL SPRAY" between $5.00 and $75.00

Cleans and seals all metal, synthetic and painted surfaces. Smudge-free, long-lasting shine. Not to be used on tires, brakes, pedals/footrests, handgrips or seat cushions. 500ml aerosol can.

G-CLEAN G-Seal PW Spray Nozzle may be purchased separately, or as a part of the G-CLEAN Green Machine Portable Electric Pressure Washer package.

Revitalizer,Stone Polish & Microfiber Cloth $34.95 STONETECH Countertop Clean & Polish 3-Pack STONETECH Professional 24 oz. Revitalizer Spray 24 oz. Polish Spray 16"x16" Microfiber Cloth Revitalizer: Daily use cleaner effectively removes soils while leaving behind an invisible protective seal to help prevent future staining. Gentle, neutral formula is safe on stone. Polish: Adds quick, brilliant shine to polished natural stone countertops and walls without leaving a...

Fast and easy way to mask around glass windows, before painting now or next week. Can be applied by brush or spray to glass or smooth metal. Weatherproofs and seals glass windows from water damage and drafts...saves energy from air conditioning and heat loss. Easily peeled off when paint is dry with no paint bleed or adhesive residue. Water clean-up.

I am looking for the above product in the 1.3oz size to travel found it once but I m out and want more

Surface must be clean and free of oil, grease, dirt, curing compounds and other foreign matter. If doubt exists as to condition of the surface, chemical or mechanical cleaning may be required. New concrete must be free of surface water prior to application. Apply CPD ® Acrylic Cure and Seal by roller or low pressure hand or power spray. Surfaces are normally dry to touch in 30 minutes and cured in 2 hours. If a second coat is required, allow the first coat to dry for approximately 12 to 15 hours...

Surface must be clean and free of oil, grease, dirt, curing compounds and other foreign matter. If doubt exists as to condition of the surface, chemical or mechanical cleaning may be required. New concrete must be free of surface water prior to application. Apply CPD ® Acrylic Cure and Seal by roller or low pressure hand or power spray. Surfaces are normally dry to touch in 30 minutes and cured in 2 hours. If a second coat is required, allow the first coat to dry for approximately 12 to 15 hours...

Moisture and salt can cause rusting of a snow blower discharge chute. These rough areas can create a starting spot for snow to build-up and create a clog. If there is any rough paint or rust, sand and clean the spots down to the bare metal and use a rust-inhibiting paint to protect. You can improve the chute's efficiency by waxing the chute with an automotive paint wax or spray with silicone before a work session.

Funnel top opening for no mess filling. Translucent bottle for ease in checking fluid level. Spray shield protects siding and locks on board. 1/4, 1/2, and 1/3 gpm fan nozzles. Locking spray handle for ease of spraying. Curved wand and reinforced hose. For decks, bricks & masonry, and fences.

Compression sprayers promo cap 1 gallon For staining, sealing and washing. Translucent bottle for ease in checking fluid level. Spray decks, siding, fences and concrete with ease. Other products by Clean 'N Seal, Chapin or in Tank Sprayer 1/2 to 2 Gallon

Sexy Hair-straight Sexy Hair Smooth & Seal Aerated Anti-frizz Spray 8.1 Oz

Moisture and salt can cause rusting of a snow blower discharge chute. These rough areas can create a starting spot for snow to build-up and create a clog. If there is any rough paint or rust, sand and clean the spots down to the bare metal and use a rust-inhibiting paint to protect. You can improve the chute's efficiency by waxing the chute with an automotive paint wax or spray with silicone before a work session.