3506 results for "Belt Sander" between $5.00 and $3,000.00

Features: -Open end belt sander. -Model 1632. -5HP, 1Ph, 230V. -1/4HP, 1Ph feed motor. -Assembly required. -Dimensions: 66" H x 29" W x 40" D.

Double sealed ball-bearing construction Belt sander operates horizontally and vertically and can be locked at any angle in between 3450-RPM grinder speed to handle just about any metal grinding application and 4900-FPM belt speed for sanding both hard and soft woods Heavy-duty cast-iron table and base, tubular steel column Pivoting head, Manufacturer: General International

J-4210K 6 X 48 Belt ; 10" Disc Sander 6" x 48" Belt10" DiscTwo cast iron tilting tables for mitering applicationsFull access to the belt when tilted in the horizontal positionDust collection shrouds on belt and discQuick-release tension mechanism makes belt changes quick and easyRemovable safety key switchEnclosed base protects motor from sanding dustFloor stand included (Some assembly required)Miter gaugeHeavy-duty one piece steel stand 57.50 L. 19.00 W. 25.50 H.

Features and Benefits: -Smooths and contours inside or outside corners at 4,500 ft./min.. -The 3/8" x 13" belt rotates 360 degrees. -360 degree rotation allows for sanding of normally inaccessible working areas such as internal surfaces and narrow corners. Specifications: pad size: 3/8" x 13"; free speed: 18,000 RPM; overall length: 11-1/2"; net weight: 1-1/3 lbs.; air inlet thread: 1/4" NPT; air hose ID size: 3/8"; average air consumption: 7 cfm; air pressure...

110-to-120-Volt AC; 60HZ; 1/8hp (100-Watt) Length is 13-Inch; weight 1.9-Pound Comes with 2 each 80 and 2 each 180 grit sanding belts Replacement sanding belts are available in set of 5: 28581, 180 grit; 28582, 120 grit; 28583, 80 grit; silicone carbide belt for glass, brass, ceramics and steel, 28579, 180 grit, Weight: 3.28 lbs., Manufacturer: Proxxon

Industrial Power Tools Extended base to allow flush sanding. * Replaceable ceramic wear plate for easy maintenance * Extra long cord for operator convenience * Easy lever control to change belts * Ball bearing construction for long tool life * Powerful 7.8 motor for fast stock removal * Low profile for balance and less gouging * Highly efficient dust collector * Double insulated INCLUDES: * 1 ea. Abrasive belt (#80; 742312-8C) * Dust bag (122296-4) Belt Size 3" x 24"Belt Speed (ft/min)1,300 AMPS...

3-in x 24-in Belt Sander - 9920. Abrasive Belt *80 - 742312-8C. Dust Bag - 122591-2. Operating Manual

Rear exhaust directs air away from work Equipped with exhaust silencer for noise reduction Built-in regulator for positive speed control 360 Degree head rotation provides versatility for every job Belt tracking adjustment is conveniently located, Weight: 3.7 pounds, Manufacturer: JET

Comes with 5 each 120 and 140 grit belts; blow molded storage case and clamp for stationary use on workbench 110-120VAC, 60 HZ, .2hp (150W) belt speed 525 feet per minute Weighs 1.54 pounds Replacement belts, set of 5 each: 28922, 80 grit; 28924 120 grit; 28926 180 grit; 28928 240 grit, Manufacturer: Proxxon

Air inlet National Pipe Thread of 1/4-Inch Minimum hose size is 3/8-Inch Average air consumption is 5.5 cubic-feet per minute Belt width is 3/8-Inch Belt size is 3/8 x 13-Inch, Manufacturer: Builders World Wholesale Distribution

Rear exhaust directs air away from work surface Equipped with Silencer Hot spots are eliminated due to the extra belt length Ergonomic and lightweight design reduce arm fatigue Swing position grip is adjustable up to 360-Degree offering operator comfort and convenience, Manufacturer: MSI

Golfsmith 42 Multi Deluxe Belt Sander This 42 Multi Deluxe Belt Sander with Ferrule Turning Arm handles all of your shaft tip preparation needs or you can use it to quickly turn down ferrules. The sander can be mounted to a workbench or attached to a stand.

Powerful 8 Amp motor for aggressive material removal. 850-1,400 sfpm for sanding a variety of materials. Machined platen to ensure flatness. Motor between the rollers for better balance. Heavy-duty all-metal housing for durability. Easy to use, out of the way dust collection system.

MPN #CPT7858. Chicago Pneumatic 3/8 Belt Sander. Most Air Tools products are available for in-store pickup from Advance Auto Parts.

Powerful 1/3-horsepower fan-cooled motor is totally enclosed Motor spins five-inch disc at 3,450 RPM and the one-inch by 30-inch belt at 3,340 SFPM 7-1/4-inch by 3-3/4-inch cast aluminum disc table tilts 0-45 degrees Belt table tilts for chisel sharpening Solid steel base with rubber vibration feet and strong cast aluminum frame, Weight: 18.75 pounds, Manufacturer: Rikon

3-in x 21-in Variable Speed Belt Sander - 1274DVS-46. Graphite Platen Pad - 2 601 098 037. Cloth Dust Bag - 2 605 411 023

The Chicago Pneumatic CP858 Belt Sander works great for paint removal, weld sanding, smoothing and rust removal, especially when working in difficult to reach areas. Features: 10mm belt capacity with quick change belt replacement for fast and easy belt changes Adjustable sanding arm allows for greater access to the most difficult to reach areas Handle exhaust port directs air away from the work space What's In The Box: Chicago Pneumatic CP858 Belt Sander

Accepts optional sanding frame, stand or fence for versatility. Electronic Variable Speed dial for fine finishing or fast stock removal. Graphite platen pad for cool running compact in-line design sands flush to vertical surfaces. Lever action belt change replaceable wear inserts protects housing from damage.