157 results for "Baldwin 0102038 Colonial Door Knocker Door Accessory - Aged Brass" between $10.00 and $75.00

6 1/2"H x 3 1/2"W Bolt CTC: 4" With observ-o-scope, Weight: 1 lbs., Manufacturer: Baldwin

Brass Accents provides distinctive craftsmanship with old-world tradition for a lifetime of elegance. Their products are hand finished in the USA. They are one of the worlds leading crafters of cast-brass and hot-forged decorative brass hardware.

Set of 2 Round Steeple Tip Finials for Square Corner Hinge

Brass Full Mortise Ball Bearing Hinge, 4" x 4" x .130" with Square Corners and 5 KnucklesBall bearing hinges are recommended for doors equipped with door closers and/or receiving average frequency service. Hinges are designed for medium weight doors receiving average traffic in residential and light commercial construction. Three hinges on doors up to and including 7.5 feet and one additional hinge for each addition 2.5 feet. Finials are threaded into the barrel of the hinge to prevent pin from...

Brass Full Mortise Hinge, 4" x 4" x .130" with Square Corners and 5 KnucklesBaldwin full mortise hinges are classified as standard weight for installation on doors up to 1.75" in thickness. Use three hinges on doors up to and including 7.5 feet and one additional hinge for each additional 2.5 feet. All hinges have a slight offset leaf which provides clearance of .062" when leaves are closed and parallel.Square CornerLength of Joint: 4.0"Width Open 4.0"Thickness: .130"Knuckles: 5Priced Per Hinge...

Baldwin 1090.I Set of Two Decorative Ball Tip Finials for Square Corner Hinges Baldwin was born in America, and in the spirit of its birthplace, strives constantly to achieve a rich combination of Timeless Craftsmanship and timely good taste. For more than 50 years, Baldwin has successfully aimed at setting new standards of excellence in its products for the home and workplace. Hinge finials are specially-designed to thread into the top and bottom of the hinge barrel. All finials are completely interchangeable...

1. Baldwin produces its products in accordance with the highest American standards of quality and excellence. All these products are manufactured from the highest quality brass obtainable; however, these products are susceptible to small surface indentations and imperfections due to the malleability of the material and the crafting of the product. Although Baldwin's material safeguards protect against shipping products of unacceptable quality, a small surface indentation or imperfection may not disqualify...

1. Baldwin produces its products in accordance with the highest American standards of quality and excellence. All these products are manufactured from the highest quality brass obtainable; however, these products are susceptible to small surface indentations and imperfections due to the malleability of the material and the crafting of the product. Although Baldwin's material safeguards protect against shipping products of unacceptable quality, a small surface indentation or imperfection may not disqualify...

Home > All Product Brands > Baldwin: Solid Brass Door, Window, Cabinet & Bath Hardware. > Entrance Door Knockers > Baldwin Entrance Door Knockers 0103 Colonial Knocker 6.5 inch x 3.5 inch (165 mm x 89 mm) CTC of bolts-4 inch (102 mm)

Baldwin Cabinet Door Colonial Pull Size 3"CTC Available Finishes For This Item Are Polished Brass Satin Brass Oil Rubbed Bronze Satin Nickel Antique Nickel Polished Chrome And Satin Chrome

Baldwin, 0106, Door Knocker,Lifetime Polished Brass, Door Accessory Entrance Door Knocker - FRENCHFrench Door KnockerSize: 7.5" x 2.5" (190 x 64mm) CTC of bolts: 5.687" (144mm)Note: For screw covers see Baldwin model nos. 0129 (colonial designs) and 0175 (modern designs).

Baldwin, 0113, Door Knocker,Satin Brass, General Hardware, Door Accessory Baldwin Entrance "S" Door Knocker "S" Baldwin Entrance Door Knocker Size: 2" dia. base (51mm); 7.75" high (197mm); 2.75" projection CTC of bolts: 4.75" (127mm) Note: For screw covers see Baldwin model nos. 0129 (colonial designs) and 0175 (modern designs).

Baldwin's Colonial Door Knocker is forged in solid brass and available in a wide variety of quality finishes. The Colonial Door Knocker is the only Baldwin knocker with an optional Observ-o-scope door viewer; see configuration options to select. Ships with fasteners suitable for 1¾"-thick door.Center-to-center of bolts: 4"Note: Product finishes which are RELIEVED may vary in luster, hue, and appearance as a result of handcrafted variances in the final finishing step. Materials Solid Brass

Entrance Door Knocker - IMPERIALImperial Door KnockerSize: 8.5" x 4.125" (216 x 104mm)CTC of bolts: 4.75" (121mm)

Combination Strike Plate for Tubular privacy bolts. For left handed doors.

Right Handed Extended LipExtended lip with 2-3/4" backset latch and deadboltUse with locks installed on special door / frame conditionsSupplied with a curved lip onlyLip to Center Length: 2.25" (57mm)

Left Handed Extended LipExtended lip with 2-3/4" backset , latch and deadboltUse with locks installed on special door / frame conditionsSupplied with a curved lip onlyLip to Center Length: 2.25" (57mm)

Left Handed Extended LipExtended lip for 1-1/2", 2", 2-1/2" Backset Latch and DeadboltUse with locks installed on special door / frame conditionsSupplied with a curved lip and DeadboltLip to Center Length: 1.625" (41mm)