338 results for "Back to Basics 2 in 1 Mixer" between $50.00 and $4,000.00

Jiffler Mixers are good for mixing thinset mortar, grout, and other powdered materials. The unique four-way counteraction gives fast and complete dispersion with no splash and with no air or lumps in the mix. Upper wheels pull down, lower wheel cuts up - the holes and slots screen out the lumps. All mixers have vertically adjustable wheels and are made from corrosion resistant plated steel. 2-1/2" diameter mixing wheel. The shaft is 1/4" in diameter x 11" length.

Hi-Flow Pressure Balance Concealed Bath Or Shower Mixer w/o DiverterPressure balanced concealed bath or shower mixer rough, no volume controlSingle lever, diaphragm cartridgeBody made from solid brassShower flow: 7.2 gpm @ 45 PSI or 9 gpm @ 60 PSI1/2" male x 1/2" male service stops, included with valveFrom the center of supply to finish wall: min. 1-5/8", max 2-1/8"

The Pulsafeeder Bracket Mount Mixer provides a means of mounting a mixer to a tank cover or other flat surface. Four 18/8 Stainless Steel bolts and two rugged 3/8 inch thick steel brackets hold the mixer securely in place, requiring no additional mixer supports. All mixers are constructed of 316 Stainless Steel Shaft with an integral impeller. Special epoxy and vinyl shaft coatings are available for applications where the solution being agitated is not compatible with 316 Stainless Steel. The shaft...

All Anvil/Vollrath orders must be a minimum of $130.

Mackie Onyx 1620i Firewire Recording Mixer Compatible with Pro Tools M-Powered 8; Mackie Provides Power Mixing to Your Stage or Studio! The Mackie Onyx 1620i Firewire recording mixer combines the benefits of a powerful computer interface with the tactile, hands-on control of a premium analog mixer. Equipped with eight premium precision engineered studio grade Onyx microphone preamps, the Onyx 1620i is great for live sound reinforcement or studio recording, all in a durable road-worthy package. ...

2-1/2in steel mixing wheels. 1/4in x 11in shaft. For use with 1/4in or larger drill with portable or staionary power over 1800 rpm in a 4-10 quart container. - Marshalltown Equivalent Sku 14574 Part # FM774

Audio Inputs. Mic: 40dB Gain, electronically balanced input. Phono 1 and 2: 40dB Gain @ 1kHz, unbalanced inputs. Line 1 and 2: 0dB Gain, unbalanced inputs. Return: 0dB Gain, unbalanced inputs. Audio Outputs. Master: Maximum +21dBu @ +10dB (Line In). Tape: Type 0dBu. Send: Type 0dBu. Phones: Type 140 mOhms @ 1% THD. Equalizer. Stereo Low: +12dB/-32dB @ 50 Hz. Stereo Mid: +12dB/-32dB @ 1.2 kHz. Stereo High: +12dB/-32dB @ 10 kHz. Mic Low: +12dB/-12dB @ 50 Hz. Mic High: +12dB/-12dB @ ...

Whiteman WM Poly Mortar MixersThe choice of the professional mason, Whiteman mixers lead the rest in quality, innovation and engineering. Our heavy-duty models are reliable, easy to maintain and are available in a full range of sizes and engine configurations for almost any application. Free shipping from Multiquip warehouse Bag breakers with automatic grate opener standard Heavy-duty welded drum grate stands up to heavy bags Improved high strength cast iron paddle arms with rubber blades. offers...

2 mono channels with XLR and 1/4" TRS inputs. 4 stereo 1/4" channels. Tape-in RCA inputs with level control and PFL switches. Channel controls feature trim, bass, treble, pre/post aux send, level controls, low cuts, PFL switches and inserts. Tape record out RCA jacks. Peak LEDs on mono channels. 8 1/8" W x 1 5/8" H x 9" D.

The Canoga 113 Series of concrete mixers are towable with a welded steel frame and torsion bar suspension. Model 113 mixers feature cast iron ring and pinion drive system powered by 1/2 Hp TEFC electric motor or a GX120 Honda engine. Simple dump mechanism is easy to use and provides control when discharging material. Heavy-duty steel drum measures 26" in diameter with 16" opening. Tow-tongue includes cast iron 2" ball hitch.

14-channel ultra-low noise compact mixer with highest possible headroom. 6 studio-grade XDR2™ Extended Dynamic Range mic preamps with: Ultra-wide 60dB gain range 130dB dynamic range +22dBu line input handling Extended low frequency response Distortion under 0.0007% (20Hz­20kHz) Phantom power for studio condenser mics. 14 high-headroom line inputs. Advanced DC pulse transformer RF rejection. 60mm long-wearing log-taper faders. 2 Aux sends, level, pan and PFL solo on each channel. 2 stereo Aux...

Mono 1/4" inputs with individual volume controls. 1/4" balanced TRS output with master volume control. Up to 25dB of gain and 87dB S/N ratio. Frequency response: 10Hz - 100kHz. Two-way power via AC adapter or 9V battery. 6" W x 2" H x 3 1/3" D.

Console-style mixer with dual Class D amplifiers. 20 XLR mic channels (2 with stereo line inputs - 1/4" on channel 19, RCA on channel 20). Smooth 60mm faders. Each amplifier provides 600W program at 4 ohms (360W program at 8 ohms). Feedback Ferret feedback suppressor onboard. A 4-band EQ, 2 monitor sends, and an effects send on each input channel. Mid-morph technology on mono input channels. Digital effects. Rackmountable. 5 power amp modes, including fully active subwoofer crossover. Dual...

Maximum Output Power @ 0.5 % THD at 1 kHz:. 500 x 2 @ 4 ohms. 350 x 2 @ 8 ohms (UA). 320 x 2 @ 8 ohms (H). Frequency Response : -3, 0, 1 dB. 20 Hz-20 kHz, ref to the nominal output level @ 1 kHz. Total Harmonic Distortion: Less than 0.5 % (THD+N). +14 dB @ 20 Hz, 1 kHz, 20 kHz, GAIN control: all nominal. Hum & Noise: Equivalent Input Noise, -115 dBu, Rs = 150 ohms CH 1-4 MIC/LINE: MIC. Crosstalk @ 1 kHz: -65 dB. Input Connectors:. CH 1-4: XLR and Phone. CH 5/6, 7/8: XLR and Phone. CH...

*Image is a representation. Actual product may vary based on model, size, and options selected.

These gear-drive mixers are perfect for mixing the contents of semi-bulk shipping containers. Mount mixers directly to a 2" (51 mm) NPT coupling, or order the optional cap mounting flange to use mixer on any plastic screw cap on bulk mixing containers. Simply mount the flange to your bulk cap by drilling four holes, mixer attaches to the flange and you are ready to mix. Power requirement for TEFC motors is 115 to 230 VAC, 60 Hz, single phase.

* For Rankin Delux MODELS RDR,RDHP,SUHP SERIES, 1/8" MPT X 3/16" CC. * For Bakers Pride model series 50, GG, SGBR. * Bakers Pride no. R3019X.

1 gallon paint mixer. A good quality mixer for use with all paints and enamels. 2-5/8 IN polypropylene impeller. Auger teeth scrub container bottom. 1/4 IN x 11 IN. Steel hex shaft.