610 results for "Atwood water heater" between $25.00 and $700.00

Atwood Water Heaters feature foam insulated aluminum tanks to prevent heat loss. Fast recovery LP/Electric Water Heaters produce up to 13.5 gallons of hot water per hour at 70% efficiency for gas models using temperature raising 60F to 160F. 8800 BTU. USA. Pilot Ignition has economical time-tested performance. The pilot is manually lit when the destination is reached and hot water is available in less than 30 minutes. Additional features: Serviceable - 95% of all serviceable components are accessible...

Atwood 6 and 10 gallon marine water heaters, available with heat exchangers for efficient water heating when underway.

Direct Spark Ignition Gas Water Heater. Operate your LP Water Heater from inside your RV and produce up to 7.4 gallons of hot water per hour at 70% efficiency for gas models using temperature raising 60F to 160F. Gas lines are connected in a sealed combustion area and vented to the autside as an extra safety precaution. 8800 BTU. USA. Pilot Ignition has economical time-tested performance. The pilot is manually lit when the destination is reached and hot water is available in less than 30 minutes...

Atwood water heaters are 14 pounds lighter than competitive brands. Heaters that also operate from an electric source can run off an electrical hook up or a generator. LP/Gas heaters include a 1,400 watt electric heating element, an electric thermostat and an on-off switch. Heaters with heat exchangers transfer otherwise wasted energy from the engine-cooling system of a motorized coach to the water heater during travel. Features include a high temperature limit switch, thermostat and pressure relief...

G10-2C 10 gallon Rv water heater, Gas, Pilot Dimensions 16"W x 15.5 "H x 21 3/4"D NOTE: Water Heaters Include Full Color Graphics Box & Polar White Door Pre-Installed The Atwood water heater benefits: Never go without a hot shower with this generous 10 gallon capacity. Get up an running quickly with the included door, attaching hardware, and installation instructions. Conveniently uses LP gas to stay running anywhere. No need for an extra aluminum anode for corrosion protection - these have sturdy...

Atwood water heaters feature a patented "through tube" combustion chamber that uses the pilot flame to help maintain water temperature instead of losing this heat energy into the atmosphere. All units are light weight and compact, fitting into a 6 gal.-12 5/8" x 16 VV opening with all controls accessible from the front for easy servicing. LP Gas, Input 8,800 BTU, recovery rate 7.4 Gal./Hr., 19 Ibs. Empty Weight All Atwood water heaters are shipped with doors.

* VenturesRVParts sells Atwood Water Heater Screw in Heating Element that is a replacement for your electric screw-in heating element for your water heater. It comes with a new gasket and a 2 year warranty .

Pre-installed winterizing by-pass kits. Direct-spark electronic ignition. They are easily installed in the same cut-out as existing Atwood 6 or 10 gallon camper water heaters. Cutout dimensions for the 10 gallon are 15-3/4"H x 16-1/4"W x 21-3/4"D. Cutout dimensions for the 6 gallon are 12-5/8"H x 16-1/4"W x 20"D.

Electrode/Spark Probe Service Kit, Post Style Connection, Will Work on Electronic Water Heater Models: GCH6-4E, GCH6-6E, GC6A-7E, GH6-6E, G6A-6E, G6A-2E, GH6-3E, G6A-3E, GH6-3E, GH6-4E, G6A-4E

Delivers hot water in less than 30 minutes! All you have to do is light the pilot light when your reach your destination and hot water is available in less than one half hour. Atwood six gallon water heaters are 14 pounds lighter than competitive brands. Features include a high temperature limit switch, thermostat and pressure and temperature relief valve that prevent problems before they happen. 8,800 BTUs. Cut-out size: 16"W x 12-1/2"H x 16-7/8"D. Durable, powder-coated access doors are included...

ATWOOD RV WATER HEATERS Atwood Water Heaters feature a patented “through-tube” combustion chamber, utilizing the pilot flame to help maintain water temperature rather than losing this heat energy into the atmosphere. All units are lightweight and compact, with easily accessible controls for servicing. FUEL-SAVING FLEXIBILITY Atwood water heaters operate on LP gas. In addition, there are models that operate from an electric source, with an engine coolant heat exchanger or both. With the electric option...

The casing of every Atwood electric water heater is constructed from corrosion resistant materials and the non stainless steel models are carefully painted to stand up against the most corrosive marine environments. Special attention to detail on edges and corners helps assure greater handling safety. The Atwood tank is constructed of high strength aluminum core with a bonded corrosion fighting cladding material on the interior surface to assure a long life. This eliminates the need for an anode...

Product Description Atwood Water Heater - Geh1 94029 10 Gallon With Exothermal Technology, Gas, Dsi, 120Vac Exchange Dimensions: 16"W X 15.5"H X 21 3/4"D Note: Water Heaters Include Full Color Graphics Box & Polar White Door Pre-Installed

The casing of every Atwood electric water heater is constructed from corrosion resistant materials and the non stainless steel models are carefully painted to stand up against the most corrosive marine environments. Special attention to detail on edges and corners helps assure greater handling safety. The Atwood tank is constructed of high strength aluminum core with a bonded corrosion fighting cladding material on the interior surface to assure a long life. This eliminates the need for an anode...

Exothermal technology delivers 50% more hot water than standard water heaters without increasing size or weight. Using the principles of heat exchange, Atwood XT® 10 gallon models provide the equivalent of 16 gallons of hot water at the same size and weight as standard Atwood 10 gallon water heaters. The 6 gallon Atwood XT® provides the equivalent of 9 gallons of hot water at the same size and weight of standard Atwood 6 gallon models. Choose propane or propane/electric models, all with Direct...

Note: Replacement mounting bracket is no longer available, existing bracket may need to be modified for use with this valve.