|
Arduino XBee Shield Empty
Description: This a unique shield for the Arduino platform. This board mates directly with the Arduino USB board and allows the Arduino to wireless communicate over a modified ZigBee protocol using the popular XBee module from Maxstream. This shield does not include an XBee module. Any XBee module will work with the shield.Documents: XBee Datasheet Arduino XBee Page 
|
$22.95 
|
Top stores
cutedigi.com
$22.95
|
|
Arduino Xbee Shield Wireless Module
* ISM 2.4 GHz operating frequency. * 1 mW (0 dBm) power output (up to 100m range). * Industrial temperature rating (-40° C to 85° C). * Approved for use in USA, Canada, Australia and Europe. * IEEE 802.15.4 compliant). * Advanced networking & low-power modes supported. * RF data rate: 250 Kbps. * Interface data rate: Up to 115.2 Kbps. * Receiver sensitivity: -92 dBm. * Supply voltage: 2.8 - 3.4 V. * Transmit current: 45 mA (@ 3.3 V). * Receive current: 50 mA (@ 3.3 V). * Power-down sleep...
|
$58.28 
|
Top stores
RobotShop.com
$58.28
|
|
SolidDigi Xbee Sensor Expansion Shield for Arduino with RS485
Arduino is an open source control board. This shield is an senor expansion board that is compatible Arduino. It not only expands the existing interfaces such as data/analog port on the Arduino board, IIC interface, SPI interface, but also the RS485, SD card module interface, Xbee/Bluetooth Bee Bluetooth wireless data transmission interface and APC220/Bluetooh V3 Bluetooth wireless data transmission interface which makes the connection of most sensors to Arduion very easily. It can do you a favor...
|
$19.99 junetrading.com |
Top stores
junetrading.com
$19.99
|
|
XBee Shield V1.1
A Xbee shield allows an Arduino board to communicate wirelessly using Zigbee technology. It is compatible with the Xbee module from MaxStream. The Xbee module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad. It also provides female pin headers...
|
$14.50 trossenrobotics.com |
Top stores
trossenrobotics.com
$14.50
|
|
Empty Quad-band GPRS/GSM Shield SM5100 B for Arduino
At the request of customers, this is an empty arduino Shield for SM5100 quad-band GSM/GPRS module. The module is NOT included. USA providers are all on 850/1900Mhz and pratically all the rest of the world uses 900/1800Mhz. Solid SM5100B GSM/GPRS module: a miniature, single-side board, quad-band GSM 850/EGSM 900/DCS 1800/PCS 1900 module, ready for integration in various kinds of Fix wireless phones and other wireless devices. Temperature range Normal range: -10°C to +55°C (full compliant...
|
$19.00 soliddepot.com |
Top stores
soliddepot.com
$19.00
|
|
Arduino Wireless SD Shield
The Wireless SD Shield provides a 3.3v regulated Digi Xbee slot for easy wireless connectivity, a uSD (micro Secure Digital) slot for onboard storage capabilities, and a compact prototyping board area for custom additions. Transmission LED indicator lights, a reset button, and serial select switch are also available for your convenience. Passthrough headers allow for additional Shields to be stacked on top.
|
$34.95 trossenrobotics.com |
Top stores
trossenrobotics.com
$34.95
|
|
SolidDigi Color Image LCD Shield for Arduino
The shield is an empty shield. This 128x128 mini color LCD is a perfect match for the portable application. It is designed to repalce a broken screen in a cell phone. So the connector was not designed for multiple attachment/detachment. Please be gentle and handle with care.This inexpensive LCD comes with a powerful white LED backlight and a relatively simple serial interface. It's a 9-bit interface, so beware. But we were able to get the LCD up and running on a LPC2138 with a few hours worth of...
|
$14.99 soliddepot.com |
Top stores
soliddepot.com
$14.99
|