|
Anaconda WiFi Shield for Arduino
DescriptionOverviewUseful links * Features built-in TCP/IP stack and WiFi related code * Arduino is not included * Compatible with UART to WiFi Module LinkSprite introduces the Anaconda WiFi Shield for Arduino (everything you see on the picture is included except the Arduino board). This WiFi Shield has a built-in TCP/IP stack and all the WiFi related codes. Simply add an Arduino to configure the WiFi parameters using AT command through the UART, or simply treat the WiFi as a transparent... 
|
$57.75 
|
Top stores
RobotShop.com
$57.75
|
|
Copperhead WiFi Shield for Arduino
SPI. Slave select (SS) : Arduino pin 10 (port B, pin 2). Clock (SCK) : Arduino pin 13 (port B, pin 5). Master in, slave out (MISO) : Arduino pin 12 (port B, pin 4). Master out, slave in (MOSI) : Arduino pin 11 (port B, pin 3). Interrupt (Uses only one of the following, depending on jumper setting). INT0 : Arduino pin 2 (port D, pin 2). DIG8 : Arduino pin 8 (port B, pin 0). LED : Arduino pin 9 (port B, pin 1). To regain use of this pin, remove the LED jumper cap. 5V power. GND.
|
$55.96 electronics123.com |
Top stores
electronics123.com
$55.96
|
|
CuHead WiFi Shield for Arduino
Description： This is the shield you need to get Wi-Fi connectivity to your Arduino-based project! This shield provides 802.11b connectivity and is a direct drop-on plug-and-play solution to your Arduino Diecimila/Duemilanove/Uno.Comp atible with Asynclab wifi shield!Shield FeaturesAdd-on shield built for Arduino Diecimila, Duemilanove and UnoDimensions, shape, even color match exactly!True plug-n-play solutionUses SPI for host communication (max speed 25MHz)All Arduino headers brought out for easy...
|
$55.00 soliddepot.com |
Top stores
soliddepot.com
$55.00
|
|
WiFi Shield WiShield V2.0 for Arduino
Add-on shield built for Arduino Diecimila and Duemilanove Dimensions, shape, even color match exactly! True plug-n-play solution. Uses SPI for host communication (max speed 25MHz). All Arduino headers brought out for easy access. Easy access reset button on-board. On-board PCB antenna. Switchable interrupt pin usage between INT0 and digital pin 8. Switchable LED on digital pin 9. Switchable CS pin for serial flash between digital pin 10 and digital pin 7[1].
|
$55.00 junetrading.com |
Top stores
junetrading.com
$55.00
|
|
Cupperhead WiFi Shield for Arduino
DescriptionOverviewUseful links * Add-on shield built for Arduino Diecimila, Duemilanove and Uno * True plug-n-play solution * Uses SPI for host communication (max speed 25MHz) * On-board PCB antenna LinkSprite introduces the Cupperhead WiFi Shield for Arduino. This is the shield you need to get Wi-Fi connectivity to your Arduino-based projects. This shield provides 802.11b connectivity and is a direct drop-on plug-and-play solution to your Arduino Diecimila/Duemilanove/Uno. It is also compatible...
|
$57.75
|
Top stores
RobotShop.com
$57.75
|
|
GainSpan WiFi Shield for Arduino
Description: This is the WiFi adapter board that compiles with Arduino and STM32 Spruce developed by Solid Digital. The GS1011 module is a highly integrated ultra low power wireless single chip which contains an 802.11b radio, media access controller (MAC) and baseband processor, on-chip flash memory and SRAM, and an applications processor all on a single package. Along with its embedded software stack it offers a highly scalable, reliable, manageable and secure wireless link to meet the growing...
|
$64.99 soliddepot.com |
Top stores
soliddepot.com
$64.99
|
|
DFRobot WiFi Shield V2.1 for Arduino
DescriptionOverviewUseful links * Power Source: 3.3V * RF Operating Frequency: 2.4 - 2.497 GHz * WiFi Shield V2.1 For Arduino * I/O Interface: UART, SPI, I2C, WAKE, ALARM, GPIOs * Supports the module with chip antenna The DFRobot WiFi Shield V2.1 for Arduino very proud to release this first 802 b/g/n wifi shield in the Arduino market. The shield uses WizFi210which is a low power consuming WIFI module which is applied with dynamic power management technology. When the WIFI module needs to...
|
$91.35
|
Top stores
RobotShop.com
$91.35
|
|
LinkSprite CuHead WiFi Shield for Arduino
Add-on shield built for Arduino Diecimila, Duemilanove and Uno Dimensions, shape, even color match exactly! True plug-n-play solution. Uses SPI for host communication (max speed 25MHz). All Arduino headers brought out for easy access. Easy access reset button on-board. On-board PCB antenna. Switchable interrupt pin usage between INT0 and digital pin 8. Switchable LED on digital pin 9. Switchable CS pin for serial flash between digital pin 10 and digital pin 7[1].
|
$55.00 junetrading.com |
Top stores
junetrading.com
$55.00
|
|
JUNIPER- WiFi Shield for Arduino Based on GainSpan Module
Supports IEEE 802.11. Seamlessly integrates with existing 802.11b/g infrastructure and utilizes the 802.11 security, manageability, ease-of-use, and quality of service. 802.11i/WPA2 Authentication, AES Hardware encryption. Optimized for battery powered application with very low power consumption for multiple years of battery life. PCB antenna: Range 200-300M+ Outdoor (Typical Estimate). Two 32-bit ARM7 CPU @44MHz, 1 for applications (APP) : 1 dedicated to radio (WLAN). 2 UART , I2C, 2 SPI,...
|
$64.99 junetrading.com |
Top stores
junetrading.com
$64.99
|
|
SolidDigi Relay Shield for Arduino
This relay shield for arduino can be used on the apple app mydooropener.comMyDoorOpener is a native iPhone App, combined with inexpensive and easy to setup hardware, that allows your garage door to be securely opened, closed or monitored, directly from the palm of your hand.http://www.mydooropener.c om/assembly.htmlThe arduino wifi shield can be ordered from:http://www.soliddepot.com /index.php?main_page=product_i nfo&cPath=10&products_id=82Dow nload:Schematics Sample codeDebugging steps
|
$15.99 soliddepot.com |
Top stores
soliddepot.com
$15.99
|
|
WiFi DiamondBack 1.0 -- Arduino Compatible WiFi
The DiamondBack is an Arduino Duemilanove compatible clone that has 802.11b wireless connectivity baked directly onto the board. The components have been switched out for surface mount equivalents to free up space for the wireless module. It is fully compatible with the Processing/Wiring IDE. The DiamondBack will give your Arduino projects added wireless connectivity without the need for additional bulky shields!Fully Compatible with Asynclab BlackWidow!Features:size compatible with existing Arduino...
|
$73.00 soliddepot.com |
Top stores
soliddepot.com
$73.00
|