63 results for "Aquacomputer" between $5.00 and $350.00

This adapter is made for the Aquacomputer Tubemeter USB Level Sensor and allows the tubemeter to be adapted from G1/8 to G1/4 giving you the freedom to install on virtually any reservoir.

The rebuilding kit consists of a Delrin connection terminal to which the waterblocks are connected (the standard connection terminals are being replaced). Mounting of the waterblocks is possible on 7 positions, making this connection kit compatible with virtually all Mainboards. The connection areas not used are being sealed with included stainless steel plated. Included screw plugs allow the choice between serial or parallel flow through the waterblocks.

The aquatube is a reservoir that is uniquely practical. Its large opening allows easy filling and due to its Plexi cover also perfect flow control. For individual installation of fittings and lighting accessories (not included) the Aquatube features a whopping five G1/4" threads in the base and side. Suitable screw-in plug caps for the unused threads are included. Five M4 threads each on both top and bottom of the Aquatube make installation easy and quick. Optionally installation faceplates...

This connector can be used to connect radiators from the airplex modularity system in consecutive configuration. The connector is made of black Delrin and is compatible to radiators with one circuit as well as two circuits. The radiators are locked into position using the side panels originally equipped to the radiator, no additional material is required.

This connector can be used to connect radiators from the airplex modularity system in side-by-side or horizontally stacked configuration. The connector is made of nickel plated brass and equipped with two o-ring gaskets and can easily be mounted into any connection port of the radiator. The radiators can then be locked into position using connection plates sold separately. When mounted, the radiators are flush with each other.

Note: Dual Circuit means the radiator is actually two completely separate rads in one. First circuit uses 70% of the radiator while the second circuit uses 30%. This makes dual loop systems much easier to install and plan around.

Note: Dual Circuit means the radiator is actually two completely separate rads in one. First circuit uses 70% of the radiator while the second circuit uses 30%. This makes dual loop systems much easier to install and plan around.

Aquacomputer Airplex Modularity System 240 Radiator / Pump / Reservoir Combo - Aluminum Fins - Eheim Compact 600/12V Pump (33009)

The Delrin terminals are recessed for the connecting thread and have a round pocket. In this case, a connection adapter can be connected to two radiators mounted without the hassle of using hose connections to directly connect the radiators. Having determined the orientation of the radiators with each other, the coolant flows through one side next to each other when the radiators are connected in series, horizontally stacked radiators are traversed in parallel. In addition, the system can grow indefinitely...

This mounting plate allows you to mount a radiator (airplex modularity system or of the airplex PRO/XT series) into a PC case. To do so, a fitting hole has to be cut into the case, preferably into the top cover. The mounting plate itself will then cover the edge and the radiator can be mounted underneath the cover using 140 mm fans.

This mounting plate allows you to mount a radiator (airplex modularity system or of the airplex PRO/XT series) into a PC case. To do so, a fitting hole has to be cut into the case, preferably into the top cover. The mounting plate itself will then cover the edge and the radiator can be mounted underneath the cover using 140 mm fans.

Using this set of interconnection plates, two radiators of the same size from the airplex modularity system can mechanically be fastened to each other in horizontally stacked/side-by-side configuration.

The Aquacomputer AquaBay AT makes mounting the Aquatube easy and takes up two unused 5.25 bay slots. This modular design allows easy connection to your chassis. The stainless steel construction makes for a stable mounting platform as well as being strong enough to handle even the Copper Edition Aquatube!

The professional aquabox has been improved over earlier versions! New features include G1 / 4 thread, two additional threads on the top of the aquabox and a sunken into the windshield stainless steel trim with countersunk screws. The Aquabox is machined from Delrin, a professional-solid material and is extremely durable.

The Aquacomputer Aquadrive X4 HDD Liquid Cooling Block Faceplate - Black is a replacement front face plate to turn the Aquadrive X4 into a black beauty. Now you can match your Aquadrive with your case!

Aquacomputer Aquaduct 720 XT Mark IV External Water Cooling System

One of the key-features of the new aquaero 5 is the fan control. The aquaero provides 4 fan channels and it can be expanded with 6 external connected poweradjusts to a 10 channel fan controller. The rpm of all fans is monitored and the fans can be fully controlled in the voltage range from 0 to 12V by free defined controllers. The aquaero 5 provides fantastic controlling possibilities beginning with two point controllers up to intelligent PID controllers. All output channels are short circuit protected...

The new aquastream XT pump is the completely redesigned successor to the well-proven aquastream Rev. 3.5. It presents the absolute peak of development of practically silent pumps for water cooling systems. But this pump is not only a pump, it is also a highly integrated microprocessor-controlled measuring- and control system for your cooling system. This truly unique system was even improved over the preceding system, greatly increasing the functionality of the unit. All version of the aquastream...