112 results for "Apexi silencer si" between $25.00 and $700.00

In an N-1 Endurance race, efficiency is everything. That is why all of the N-1 exhaust pipes aim for the straightest possible line with the least number of pipe bends. This allows exhaust gases to pass smoothly through the piping. The exhaust system canister is made of SUS 304 stainless steel and features a 115mm tail (Except where noted). The canister projects from the car at an angle which also contributes to smooth flowing exhaust. Because all of the exhausts are straight through, throttle...

The Super Silencer is the most effective way to lower sound output from an exhaust system without sacrificing high-end power. The silencer has also been shown to increase mid range torque in some vehicles. The Silencer will lower average output muffler sound up to 7 dB. Available for mufflers utilizing a 115mm and 90mm diameter tip.

Universal straight exit design muffler that fits mostly any cars. Made of high quality T-304 stainless steel ( Light Weight ). Increase 5-10 Horsepower. Offers a greater flow & higher power gain due to the less restrictive design. Allows greater exhaust velocity for better mid-range boost response & high power. Benefit from greater exhaust flow capacity as engine tuning levels increase. Brand new in original packaging. Exactly the same as shown in the picture!.

The Super Silencer is the most effective way to lower sound output from an exhaust system without sacrificing high-end power. The Silencer has also been shown to increase mid-range torque in some vehicles. The Silencer will lower average output muffler sound by approx. 7 dB.

9 03/19/2007 The valve definitely made the exhaust quiet without sacrificing a lot of performance at all. On a 380 WHP turbo Honda, I didn't feel any loss up top, but the turbo did spool a few hundred RPM's later than a straight 3" exhaust.

The ECV was created as an alternative to the standard silencer typically fitted in the tip of performance exhaust systems to lower the sound output. The ECV (Exhaust Control Valve) is a spring loaded butterfly valve that can be installed to the main piping of an existing exhaust system. The angle of the valve can be modified on the fly from within the cockpit to provide complete control over exhaust decibel output.

The Apexi Super Silencer is the easiest way to lower the sound output of your exhaust. It has been shown to reduce exhaust volume by around 7db and in some cars actually causes an increase of mid range torque. But really though, you are here because you need to quiet your exhaust; and this is just the product you need.

The Super Silencer is the most effective way to lower sound output caused by a straight through racing exhaust sustem. The Silencer has also been shown to actually increase mid-range torque in some vehicles. On avera, the Super Silencer will lower exhaust noise output by approximately 7dB.Available for A'PEX mufflers with 90mm or 115mm tip.

The ATS was developed as a high performance evolution to the standard tail pipe silencers available in the market today. While many people enjoy the power gains of a racing exhaust on the track, often times these systems require a silencer to be installed in the tip for use on the street. While sound output can be dramatically lowered using a non-adjustable silencer, unfortunately response and power tend to suffer due to increased exhaust gas restriction. The ATS (Active Tail Silencer) uses the same...

The Super Silencer is the most effective way to lower sound output caused by a straight through racing exhaust system. The Silencer has also been shown to actually increase mid-range torque in some vehicles. On average, the Super Silencer will lower exhaust noise output by approximately 7dB.

The Super Silencer is the most effective way to lower sound output from an exhaust system without sacrificing high-end power. The silencer has also been shown to increase mid range torque in some vehicles. The Silencer will lower average output muffler sound up to 7 dB. Available for mufflers utilizing a 115mm diameter tip.

The APEXi Active Tail Silencer was developed as a high performance evolution to the standard tail pipe silencers available in the market today. While many people enjoy the power gains of a racing exhaust on the track, often times these systems require a silencer to be installed in the tip for use on the street. While sound output can be dramatically lowered using a non-adjustable silencer, unfortunately response and power tend to suffer due to increased exhaust gas restriction. The APEXi ATS (Active...

apexi removal tool for exhaust silencers from horsepowerfreaks exhaust silencers. Install and installation help available for parts and accessories for these model years.

Develop exclusively for quick throttle response and for handling the rigorous demands of hi-power engines. 100% polished stainless steel construction with carbon fiber covering tip for light-weight design. Advanced computer-aided design the straightest possible lines with minimal amount of bends. Straight-through canister projects from the vehicle at an angle for smooth exhaust flow. Includes Super-Silencer to reduce sound output by 7 decibels for daily street use. Polished SUS 304 stainless...

In an N-1 Endurance race, efficiency is everything. That is why all of the N-1 exhaust pipes aim for the straightest possible line with the least number of pipe bends. This allows exhaust gases to pass smoothly through the piping. The exhaust system canister is made of SUS 304 stainless steel and features a 115mm tail (Except where noted). The canister projects from the car at an angle which also contributes to smooth flowing exhaust. Because all of the exhausts are straight through, throttle...

The Exhaust System offered on this page are designed to specifically fit a Honda Civic produced during the following model years: 2006, 2007, 2008, 2009, 2010 or 06, 07, 08, 09, 10. Please also note any specific model notes on the product title at the top of the page.

APEX'i ECV Exhaust Control Valve is a great alternative to typical muffler silencers. The ECV can be installed anywhere along the exhaust system and be adjusted on-the-fly from inside the cockpit. The butterfly valve are spring loaded and its angle can be changed by using the adjustable cable. The ECV allows complete control over sound output from your exhaust system.

APEX'i ECV Exhaust Control Valve is a great alternative to typical muffler silencers. The ECV can be installed anywhere along the exhaust system and be adjusted on-the-fly from inside the cockpit. The butterfly valve are spring loaded and its angle can be changed by using the adjustable cable. The ECV allows complete control over sound output from your exhaust system.