|
Denon DP-29F Analog Turntable
Belt-driven, fully automatic analog turntable with RIAA-equalized phono preamplifier Plugs into any receiver's analog line-level input (ideal for receivers without phono inputs) Rigid die-cast aluminum construction ensures stable rotation for high-fidelity sound Automated system starts playing with push of a button; 33-1/3 and 45 rpm speeds Includes DSN-82 moving magnet cartridge; 14.2 x 3.8 x 14.1 inches; 2-year warranty |
$148.99 |
Top stores
Amazon.com
$148.99
|
|
Denon DP-300F Fully Automatic Analog Turntable
Designed with a heavier base construction to decrease vibration for superior performance Tone arm action starts and stops automatically using gentle lifting and lowering motions to protect your vinyl Moving-magnet (MM) cartridge headshell is removable Turntable sheet is 5mm thick; uses hologram vibration analysis to improve its ability to hold a record DC servo motor and belt drive system with rotation speeds of 33 1/3 or 45 rpm |
$328.97 |
Top stores
Amazon.com
$328.97
|
|
DJ ANALOG TURNTABLE BLACK T-SHIRT (XL)
|
$39.99 Rock and Soul DJ Equipment & Records |
Top stores
Rock and Soul DJ Equipment & Records
$39.99
|
|
Pro-Ject Debut III/USB - Turntable with USB output
* Tonearm bearing uses inverted hardened stainless-steel points and sapphire thrust-pads. * Headshell and armtube formed from a single aluminum workpiece, rotation allows adjustment of needle azimuth despite fixed headshell. * Steel platter with felt mat. * Low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing. * Motor decoupled to reduce vibration. * Supplied with Ortofon OM 5E cartridge fitted. * Pro-Ject 8.6 tonearm. * Nominal speeds... |
$399.00 gcaudio.com |
Top stores
gcaudio.com
$399.00
|
|
vintage analog turntable from the seventies Unlimited copies
analog, audio, button, child, entertainment, equipment, gramophone, media, megaphone, melody, music, musical, needle, nostalgia, object, obsolete, old, old-fashioned, phonograph, play, player, portable, record, retro, revival, seventies, sixties, sound, style, table, technology, turntable, vinyl |
$85.00 graphicleftovers.com |
Top stores
graphicleftovers.com
$85.00
|
|
TURNTABLES ANALOG DP-29F
|
$149.99 affordablehomeelectronics.com |
Top stores
affordablehomeelectronics.com
$149.99
|
|
Panasonic Introduction to Technics* Analog Turntable SL-1200MK2 & SL-1200MK2PK
That's because our heavy-duty design, vibration-resistant construction, and mechanical precision make a lot of what those early DJs did possible. This deck was the first to feature a Direct Drive motor, quartz movement for total accuracy, adjustable tone arm weights, anti-skate control, a pop-up target light and a sliding pitch control. With each new improvement, as form follows function, the Technics turntable has become a thing of beauty. |
$549.95 |
Top stores
Panasonic
$549.95
|
|
Basis Revolution Turntable Belt
Basis belts were already made to highest standard in the industry, and their supplier said it just wasnt possible to reduce tolerances further. So A.J. embarked on a crusade that eventually led him to design his own process and apparatus which grinds the belt and to an astonishing accuracy of one-ten-thousandths of an inch! These belts are now available to all Basis owners for $125. The improvement will startle you! |
$125.00 gcaudio.com |
Top stores
gcaudio.com
$125.00
|
|
Nostalgia TCD-682ERED Retro Style Turntable with Analog AM FM Radio
Nostalgia TCD-682ERED Retro Style Turntable with Analog AM FM Radio $92.99 |
$92.99 wegotbetterdeals.com |
Top stores
wegotbetterdeals.com
$92.99
|
|
Vinyl Word - Nottingham Analogue Space Deck Turntable and Ace-Space Tonearm (11/2005)
The Dynavector P-75 phono stage I normally use is a solid-state unit that is relatively inexpensive: $595. In fact, its so inexpensive that Dynavector sometimes worries that, like the late Rodney Dangerfield, it wont get any respect. One of the reasons it costs so little is that it has a very simple circuit and an external wall-wart power supply. It is also miniscule and doesn't have a particularly solid-looking enclosure. But theres a lot going on in its small chassis ... |
$1,995.00 soundstage.com |
Top stores
soundstage.com
$1,995.00
|
|
Music Hall USB-1 Turntable with USB Output
Music Halls new USB-1 is a convenient, easy to use, and fun turntable. Its a snap to set-up and comes with everything you need to start spinning vinyl. Whether youre looking to digitize and download your record collection, release your inner DJ, or simply discover the joy of spinning vinyl, the USB-1 is your answer. It has a built-in phono preamp, cartridge, dust cover, and includes all necessary cables and software required for simple plug and play operation. |
$249.00 gcaudio.com |
Top stores
gcaudio.com
$249.00
|
|
VPI Scout 2 Turntable with JMW 9HM Tonearm
The arm on the Scout is excellent but is limited to higher compliance moving coils (above 12) or moving iron and moving magnet cartridges of higher compliance. The Scout II has a new higher mass tapered tonearm based on the very successful 12.7 arm, reduced in length but still having the full machined tapered arm tube and internal Delrin damping. This new JMW-9HM is a better match for all moving coil cartridges. The new arm has higher mass, greater damping, and works well with cartridges like the... |
$2,499.00 gcaudio.com |
Top stores
gcaudio.com
$2,499.00
|
|
Rega P5 Turntable
Installations of Rega cartridges on Rega tonearms is a breeze. Many of their cartridges come with a third mounting hole (positioned at the front of the mounting plate), a corresponding hole is found on the Rega tonearms. Simply align the two, insert a screw and, bingo, youve just set your overhang! No muss, no fuss, a simple procedure that anyone can perform. If one uses the Rega cartridges (recommended if you want to keep set-up to a minimum) there is no VTA to adjust, just set the tracking force... |
$1,395.00 gcaudio.com |
Top stores
gcaudio.com
$1,395.00
|
|
Rega Turntable Wall Bracket
Wall mounting of your turntable can significantly reduce or eliminate annoying skipping caused by footfalls. The Rega Turntable Wall Bracket provides simple and secure mounting for Rega tables. With the addition of a simple wood shelf, the wall bracket may also be used with other turntables. |
$179.00 gcaudio.com |
Top stores
gcaudio.com
$179.00
|
|
Rega P9 Turntable
The RB1000 carries more technological changes over previous Rega tonearms than any produced during the last twenty years! Key areas of improvement can be found in the bearing assemblies, wiring and materials used. We have worked to redistribute and reduce mass in areas of the tonearm where mass is critical to performance. The easiest place to see these changes in evidence would be the new polished aluminum arm tube. It has no coatings of any type.The changes we have made over the RB900 have resulted... |
$4,995.00 gcaudio.com |
Top stores
gcaudio.com
$4,995.00
|
|
Accessories, Upgrades & Tools VPI Turntable Stand
The VPI Turntable Stand is composed of a welded steel base section 30 high with spiked leveling feet. The four columns are hollow and can be filled with sand or lead shot for better damping. Three welded cross bar shelves allow the placement of the VPI SDS motor Controller, phono section, preamp or any combination of equipment you might want to use. |
$699.00 gcaudio.com |
Top stores
gcaudio.com
$699.00
|
|
Michell Gyro SE Turntable
Michell Engineering have been building quality audio turntables in Borehamwood, England for nearly 40 years, making them one of the oldest manufacturers in the industry. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. The GyroDec turntable, for example, has been around for over 25 years, and even its first incarnation can still be upgraded to the latest specification. |
$2,495.00 gcaudio.com |
Top stores
gcaudio.com
$2,495.00
|
|
Music Hall MMF-5.1 Turntable
The 2-speed, belt driven turntable utilizes a unique double plinth design, with six rubber dampers separating the top and bottom platforms. This gives the turntable an extra level of isolation and improving background silence. The compliant feet help to isolate the 'table from vibration. |
$755.00 gcaudio.com |
Top stores
gcaudio.com
$755.00
|
|
Rega RP1 Turntable
* Brand new Rega RB101 tonearm. * Precision main bearing and sub-platter assembly. * High quality low vibration motor. * All new Phenolic resin flywheel effect platter for excellent speed stability. * Ortofon OM5e moving magnet cartridge. * Rega sound quality at an unrivaled price. |
$445.00 gcaudio.com |
Top stores
gcaudio.com
$445.00
|
|
Rega RP6 Turntable with RB303 Tonearm
RP6 Features the new RB303 tonearm with upgraded bearings, phenolic resin double brace technology, cast aluminum sub-platter with 6-point contact, innovative two-piece glass flywheel platter (consisting of a secondary ring affixed to the underside of the main platter. This outer mass creates a natural flywheel effect, improving speed stability, accuracy, and consistency) and 24 Volt low noise motor with TT-PSU power supply. |
$1,495.00 gcaudio.com |
Top stores
gcaudio.com
$1,495.00
|
|
Turntables and Turntable/Tonearm Combinations Basis 2500, Clear
This high mass turntable uses the proprietary Debut oil bath, double-bushing bearing/spindle assembly, placing the center of gravity of its dynamically balanced 18lb. platter below the top bushing. The result is superb speed stability for effortless music reproduction. The chassis is machined 2" acrylic stock as used in the Debut, yet the 2500 sells for 1/3 less by virtue of cost efficient manufacture. |
$12,000.00 gcaudio.com |
Top stores
gcaudio.com
$12,000.00
|
|
Turntables and Turntable/Tonearm Combinations Rega P3-24 Turntable
* No unnecessary frills. * High performance. * Outstanding musical sound performance for cost price. * Rugged reliability. * High quality components. * A long life time. |
$895.00 gcaudio.com |
Top stores
gcaudio.com
$895.00
|
|
Turntables and Turntable/Tonearm Combinations Rega RP-3
"Mass absorbs energy - lost energy equals lost music"! Rega has pioneered the use of lightweight rigid plinths. Clever use of lightweight particulate core with a highly rigid phenolic resin skin became the foundations of the high level of performance achieved by the now iconic Planar turntable range. The RP3 takes this design philosophy to the next level. A super lightweight plinth combined with a phenolic resin double brace mounted specifically where the increased rigidity is required (between the... |
$895.00 gcaudio.com |
Top stores
gcaudio.com
$895.00
|
|
Turntables and Turntable/Tonearm Combinations VPI Scoutmaster 2/JMW-9
The Scoutmaster 2 combines key features from several of VPI's most successful tables. It uses the Aries 2 platter and inverted bearing, a larger version of the steel Scout motor assembly with new fused IEC socket with new 300-RPM motor, and a dual Scout chassis with a steel center. The Scoutmaster also comes with the JMW-9 tonearm installed. |
$2,700.00 gcaudio.com |
Top stores
gcaudio.com
$2,700.00
|
|
VPI Turntable Isolation Platform
The VPI Turntable Stand is composed of a welded steel base section 30 high with spiked leveling feet. The four columns are hollow and can be filled with sand or lead shot for better damping. Three welded cross bar shelves allow the placement of the VPI SDS motor Controller, phono section, preamp or any combination of equipment you might want to use. |
$699.00 gcaudio.com |
Top stores
gcaudio.com
$699.00
|
|
vintage analog turntable from the seventies 933 x 1400 pixels
analog, audio, button, child, entertainment, equipment, gramophone, media, megaphone, melody, music, musical, needle, nostalgia, object, obsolete, old, old-fashioned, phonograph, play, player, portable, record, retro, revival, seventies, sixties, sound, style, table, technology, turntable, vinyl |
$3.00 graphicleftovers.com |
Top stores
graphicleftovers.com
$3.00
|
|
vintage analog turntable from the seventies 2367 x 3550 pixels
analog, audio, button, child, entertainment, equipment, gramophone, media, megaphone, melody, music, musical, needle, nostalgia, object, obsolete, old, old-fashioned, phonograph, play, player, portable, record, retro, revival, seventies, sixties, sound, style, table, technology, turntable, vinyl |
$6.00 graphicleftovers.com |
Top stores
graphicleftovers.com
$6.00
|
|
vintage analog turntable from the seventies 467 x 700 pixels
analog, audio, button, child, entertainment, equipment, gramophone, media, megaphone, melody, music, musical, needle, nostalgia, object, obsolete, old, old-fashioned, phonograph, play, player, portable, record, retro, revival, seventies, sixties, sound, style, table, technology, turntable, vinyl |
$1.00 graphicleftovers.com |
Top stores
graphicleftovers.com
$1.00
|
|
Music Hall Cruise Control Turntable Speed Controller
The music hall cruise control permits the electronic speed control of music hall and project turntables between 33.3 and 45 rpm at the simple touch of a button. Removing the platter and moving the belt from one pulley to the next is no longer required. The quartz-locked speed control provides unmatched speed stability to within ±0.0001% deviation. Used with the appropriate pulley and cartridge, it also permits the replay of 78 rpm records. The replay speed can be increased and decreased in twenty... |
$275.00 gcaudio.com |
Top stores
gcaudio.com
$275.00
|
|
Turntables and Turntable/Tonearm Combinations Michell Orbe SE with RB250 Special Tonearm
Michell Engineering have been building quality audio turntables in Borehamwood, England for nearly 40 years, making them one of the oldest manufacturers in the industry. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. The GyroDec turntable, for example, has been around for over 25 years, and even its first incarnation can still be upgraded to the latest specification. |
$4,995.00 gcaudio.com |
Top stores
gcaudio.com
$4,995.00
|
|
Turntables and Turntable/Tonearm Combinations Michell TecoDec - No Arm
Michell Engineering have been building quality audio turntables in Borehamwood, England for nearly 40 years, making them one of the oldest manufacturers in the industry. When you purchase a Michell product, you buy into a company that prides itself on the ability to service and maintain its products for many years to come. The GyroDec turntable, for example, has been around for over 25 years, and even its first incarnation can still be upgraded to the latest specification. |
$1,195.00 gcaudio.com |
Top stores
gcaudio.com
$1,195.00
|
|
Basis 2000 Signature Turntable
The 2000's spindle, bearing and outboard motor/pulley is a matched drive system of exceptional quality. The motor is the very same one found on their top-of-the-line Debut Gold Vacuum (a mere $10,600.00!). The acrylic platter is of uniblock construction with machined mat. The solid acrylic machined sub-chassis with integral tonearm mounting is dimensioned for both ideal energy dissipation and convenient placement on standard audio racks. The small footprint is also very user friendly at only 16"... |
$3,800.00 gcaudio.com |
Top stores
gcaudio.com
$3,800.00
|
|
Turntable Set-Up DVD by Michael Fremer
Before I watched your DVD I have to admit I was hopeless at setting up my turntable, needing to call my dealer to the rescue when something went amiss. After watching you explain and demonstrate the possible adjustments I was somewhat at a loss, but after getting out my toolkit and following the process step by step it seemed as if I was a seasoned professional. I breezed through it and thoroughly enjoyed the process. I feel I can finally and confidently say that Ive begun to master the setup of... |
$29.99 gcaudio.com |
Top stores
gcaudio.com
$29.99
|
|
Men's Analog Watch (BN-32BKBM)
For most Americans, Braun is known primarily (and singularly) as a company that makes shavers and coffee makers. However in the design world, it is known as design innovator of highest degree (some refer to it the proto-Apple). Through the designs of Dieter Rams (check this flickr stream ), Braun championed super-slick, functionalist designs throughout 1950-80s. It produced a diverse line of household goods and electronics that are highly in-demand by design collectors. Turntable Lab is proud to... |
$220.00 turntablelab.com |
Top stores
turntablelab.com
$220.00
|
|
Analog AM/FM Stereo Radio
Product Description * Nostalgic Wooden Turntable * CD Player with CD Recording Function for Turntable * Cassette Player * Analog AM/FM Stereo Radio * 2 x 2W Built-in Speakers * Aux-in Jack * Remote Control * Plays 3 Speeds (33 1/3, 45, 78 rpm) |
$299.99 electronicszilla.com |
Top stores
electronicszilla.com
$299.99
|