1840 results for "Ampeg" between $50.00 and $1,500.00

Featuring a custom-designed 15" speaker, with a massive six-pound magnet structure Baltic birch plywood construction 2-Inch Swivel Casters

2 x 12AX7 & 1 x 12AU7 Preamp Tubes 6 x 6550 Power Amp Tubes 3 Band Tone Controls Transformer Balanced Line Out Speakon & 1/4" Speaker Connectors

450W RMS power handling @ 8 ohms 1 x 15 Inches ceramic Eminence LF driver 1 Inches HF compression driver w/L-Pad level control Frequency response: 50 Hz - 17 kHz Vintage Portaflex flip-top cabinet design

HF Driver with Level Control for Precise Control of High Frequencies 3 Band Tone Controls 5 Position Style Selector for Multiple Prest Tone Settings On the Fly Balanced Line Out

RMS power output: 25 watts Speaker configuration: 1 x 8 Inches Preamp: Solid-state Power amp: Solid-state Tone controls: 3-band EQ

60 watts RMS power handling @ 16 ohms 1 x 12" Celestion Vintage 30 Cabinet: Sealed, void-free 15mm plywood Dimensions (H x W x D inches excluding handle approx.): 16.5 x 18.0 x 11.0 Handling weight (approx.): 30.8 lbs / 14 kg

Dual power modes; Full power - 15 watts RMS; Half power - 7.5 watts RMS Preamp: Tube ( 2 x 12AX7 ) Rectifier: Solid state Power amp: Tube ( 2 x 6V6GT ) Tone controls: Baxandall treble, middle and bass

Dual power modes; Full power - 50 watts RMS; Half power - 25 watts RMS Dual channels with foot switchable gain boost; Ch. 1 - low to moderate gain; Ch. 2 - moderate to high gain Preamp: Tube ( 3 x 12AX7 ) Rectifier: Solid state Power amp: Tube ( 2 x 6L6GC )

Designed and Assembled in USA 4 x 10 Inch Custom U.S. Made Eminence LF Drivers 500 watts RMS power handling at 4 ohms 1 Inch Eminence APT:50 w/ L-Pad level control Limited Edition

RMS power output:  100 watts @ 8 ohms Preamp: Solid-state Power amp: Solid-state Tone controls: Bass, mid, treble Unbalanced line out

Rugged 15mm poplar ply enclosure 800W RMS power handling @ 8 ohms 4 x 10 Inch ceramic Eminence LF driver 1 Inch HF compression driver with L-Pad level control Shelf ported for additional low frequency extension

Feature dual Neutrik Speak-On and 1/4 inch input/output jacks.

2" Voice Coil on Each 4 x 10" Speaker for Thunderous Lows HF Horn Driver with 1" Voice Coil for Punch and Clarity

Dimensions: 40 x 24 x 16 in. Component 1: Magnet Weight: 30 oz. Frequency Response (-3 dB): 53 - 18Khz Nominal Impedance: 4 Ohms

Drawing from the classic look and functionality of Ampegs legendary Portaflex cabinets, the PF210HE bass enclosure combines vintage styling with the performance of a modern 450 watt cab. The dual stamped frame ceramic Eminence 10 inch drivers push out true Ampeg tone, with the ability to dial in the right amount of highs via the Ampeg L-Pad attenuator.

The SVT Micro head is a pint-sized amp that's chock full of the same classic tone that made the original SVT such a bass powerhouse. The SVT Micro is perfect for recording or live sound situations where the SVT Classic is too much horsepower, but you still want the SVT sound that has been the industry standard for nearly four decades. The perfect companion to the SVT Micro is the SVT210AV, a compact 2 x 10" cabinet. For situations where you need SVT sound without SVT volume or girth, the SVT Micro...

Designed and Assembled in USA 1 x 15" Custom U.S. Made Eminence Neodymium Driver 575W RMS 1 Eminence APT:50 w/ L-Pad level control Paint & Splatter Finish. Powder Coated Metal Grille 1 Eminence APT:50 w/ L-Pad level control. 575W RMS